He’s been everywhere!
He’s been everywhere!He’s been everywhere!
He’s been everywhere!
Travelin’ Turtle sports a camping hat and a shell fun of patches from
his travels. Activate your switch and the animated turtle sings “I’ve
Been Everywhere Man”. Engages everyone with his fun animation
and singing. Works with or without a switch. Size: 7"L x 7"W x 10"H.
Requires 3 AA Batteries. Weight: 1 lb.
Operation:
Operation:Operation:
Operation:
1. Travelin’ Turtle requires 3 AA batteries (Not included to operate.
Use alkaline batteries only (e.g. Duracell or Energizer brand . Do
not use rechargeable batteries or any other type of batteries
because they supply lower voltage and the unit will not perform
properly. Never mix old and new batteries together or different
brands or types together.
2. The battery compartment is located on the bottom of the plush
doll. Open the Velcro flap, then using a Phillips head screwdriver
open and remove the batter cover. Next install 3 AA batteries
paying close attention to proper battery polarity.
3. Travelin’ Turtle to any external capability switch (not included via
the jack located at the end of his cord. Travelin’ Turtle is
equipped with a 1/8" jack for use with external capability
switches with a 1/8" plug. Make sure you have pushed the
switch plug all the way in. There should be no gaps.
4. Actuate your external capability switch or squeeze Travelin’
Turtle’s foot with the musical note symbol and he will sings “I’ve
Been Everywhere Man”. Engages everyone with his fun
animation and singing. Great for teaching cause and effect and
for developing visual attention.
5. Each switch activation or foot squeeze will start or stop Travelin’
Turtle. If you hit the switch or squeeze his foot again during play,
the rhymes and music will start from the beginning.
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem: Problem:
Problem: Travelin’ Turtle does not function correctly.
Action #1:
Action #1: Action #1:
Action #1: Replace the batteries paying close attention to proper
battery polarity.
Action #2:
Action #2:Action #2:
Action #2: Make sure that the connection between the external
capability switch is pushed in all the way. There should be NO gaps.
Action #3:
Action #3: Action #3:
Action #3: Try your switch with another switch operated toy/device
in an effort to rule out your switch as the source of the problems.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
If you will not be using Travelin’ Turtle for an extended amount of
time, we recommend removing the batteries.
Do not submerge
Do not submergeDo not submerge
Do not submerge the unit in water, as it will damage the electrical
components. Travelin’ Turtle is surface washable only.
Rev
Rev Rev
Rev 2/17/17
2/17/172/17/17
2/17/17
