evertz 2408RGBT/DVIT User manual

2408RGBT/DVIT
DVI and RGB Video/Audio
Portable SFP Fiber Transmitter
Instruction Manual
© Copyright 2009
EVERTZ MICROSYSTEMS LTD.
5288 John Lucas Drive,
Burlington, Ontario,
Canada L7L 5Z9
Phone: [phone]
Sales: [email protected] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web Page: http://www.evertz.com
Version 1.1 October 2009
The material contained in this manual consists of information that is the property of Evertz Microsystems and is
intended solely for the use of purchasers of the 2408RGBT/DVIT. Evertz Microsystems expressly prohibits the
use of this manual for any purpose other than the operation of the 2408RGBT/DVIT.
All rights reserved. No part of this publication may be reproduced without the express written permission of
Evertz Microsystems Ltd. Copies of this manual can be ordered from your Evertz dealer or from Evertz
Microsystems.

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read this information
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
•Do not install near any heat sources such as radiators, heat registers, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has
two blades, one blade being wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way (i.e. liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped).
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT.
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
PLUG FROM THE DUAL POWER SUPPLIES AC RECEPTACLE.
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.

INFORMATION TO USERS IN EUROPE
NOTE
This equipment with the CE marking complies with both the EMC Directive (89/336/EEC) and the Low
Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European standards:
•EN60065 Product Safety
•EN55103-1 Electromagnetic Interference Class A (Emission)
•EN55103-2 Electromagnetic Susceptibility (Immunity)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Revision 1.1 i
TABLE OF CONTENTS
1. OVERVIEW.......................................................................................................................................... 1
1.1. SETTING UP THE DDC VALUE ................................................................................................ 3
2. INSTALLATION................................................................................................................................... 4
2.1. OPTICAL CONNECTIONS......................................................................................................... 5
2.2. SIGNAL CONNECTIONS........................................................................................................... 5
2.3. INTERFACING WITH 3G OPTICAL ROUTER........................................................................... 5
2.4. CARE AND HANDLING OF OPTICAL FIBER........................................................................... 7
2.4.1. Safety.............................................................................................................................. 7
2.4.2. Assembly......................................................................................................................... 7
2.4.3. Labeling........................................................................................................................... 7
2.4.4. Handling and Connecting Fibers..................................................................................... 8
3. SPECIFICATIONS............................................................................................................................... 9
3.1. ANALOG VIDEO INPUTS.......................................................................................................... 9
3.2. DIGITAL VIDEO INPUTS ........................................................................................................... 9
3.3. DIGITAL VIDEO CONTROL....................................................................................................... 9
3.4. ANALOG AUDIO INPUTS (A2 VERSION)................................................................................. 9
3.5. OPTICAL OUTPUT................................................................................................................... 10
3.6. ELECTRICAL ........................................................................................................................... 10
3.7. PHYSICAL................................................................................................................................ 10
4. CARD-EDGE MONITORING AND CONTROL ................................................................................. 11
4.1. ACCESSING THE TOGGLE SWITCH AND PUSH BUTTON.................................................. 11
4.2. CARD EDGE OPERATION...................................................................................................... 12
4.3. STATUS INDICATOR LEDS.................................................................................................... 14
4.4. CARD-EDGE DISPLAY AND CONTROLS.............................................................................. 14
4.4.1. Card-Edge Display Warning Indications........................................................................ 15
4.4.2. Selecting the Output Laser Control Mode..................................................................... 16
4.4.3. Setting the RGB Output Video Sharpness (2408RGBT Models Only).......................... 16
4.4.4. Selecting Link Rate....................................................................................................... 16
4.4.5. Setting Input RGB Gain (2408RGBT Models Only) ...................................................... 17

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
ii Revision 1.1
4.4.6. Selecting the Display Data Channel Mode (2408RGBT Models Only) ......................... 17
4.4.7. Setting the Analog Audio Detection Threshold (A2 Version)......................................... 18
4.4.8. Setting the Analog Audio Detection Duration (A2 Version)........................................... 18
4.4.9. Selecting Identity Mode................................................................................................. 18
4.4.10. Setting the ID Tag ......................................................................................................... 19
4.4.11. Setting the Orientation of the Text on the Card Edge Display....................................... 19
4.4.12. Displaying Input Signal Resolution................................................................................ 19
4.4.13. Displaying the RGB Output Video Sharpness (2408RGBT Models Only) .................... 20
4.4.14. Displaying the Selected Display Data Channel Mode (2408RGBT Models Only)......... 20
4.4.15. Displaying the Video Input Sync (2408RGBT Models Only) ......................................... 20
4.4.16. Displaying the Selected Link Rate................................................................................. 20
4.4.17. Displaying the Selected ID Tag..................................................................................... 21
4.4.18. Displaying the Firmware Version................................................................................... 21
5. JUMPER CONTROLS....................................................................................................................... 22
5.1. CONFIGURING THE MODULE FOR FIRMWARE UPGRADES ............................................. 22
6. VISTALINK®REMOTE MONITORING/CONTROL........................................................................... 23
6.1. WHAT IS VISTALINK®?........................................................................................................... 23
6.2. VISTALINK®MONITORED PARAMETERS ............................................................................ 23
6.3. VISTALINK®CONTROLLED PARAMETERS ......................................................................... 24
6.4. VISTALINK®TRAPS.................................................................................................................. 25

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Revision 1.1 iii
Figures
Figure 1-1: 2408RGBT Block Diagram .................................................................................................................2
Figure 1-2: 2408DVIT Block Diagram ...................................................................................................................2
Figure 2-1: 2408RGBT I/O CONNECTIONS ........................................................................................................5
Figure 2-2: Setup Using an Optical Router ...........................................................................................................6
Figure 2-3: Reproduction of Laser Certification and Identification Label..............................................................7
Figure 4-1: Identifying Top Screws......................................................................................................................11
Figure 4-2: Screws on Bottom of Unit .................................................................................................................11
Figure 4-3: Inside View of Unit............................................................................................................................12
Figure 4-4: Location of Status Indicators and Jumpers ......................................................................................13
Figure 4-5: 2408RGBT Card Edge Menu............................................................................................................15
Tables
Table 1-1: Sample Typical Fiber Application Configurations ................................................................................2
Table 6-1: VistaLINK®Monitored Parameters.....................................................................................................23
Table 6-2: VistaLINK®Controlled Parameters ....................................................................................................24
Table 6-3: VistaLINK®Traps ...............................................................................................................................25

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
iv Revision 1.1
WARNING
Never look directly into an optical fiber. Irreversible eye damage can occur in a
matter of milliseconds.

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Revision 1.1 v
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0 First Release Sept 09
1.1 Added 2408DVIT options, updated electrical specifications. Oct 09
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for
the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of
Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty offered
by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty is
granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order confirmation.
Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you encounter an error,
please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in equipment design or
specifications.

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
vi Revision 1.1
This page left intentionally blank

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Revision 1.1 Page - 1
1. OVERVIEW
The 2408RGBT RGB/DVI SFP Fiber Transmitter extends one digital (DVI) or analog (RGB) video display
connection over a single fiber optic or coaxial link, with display resolutions up to WUXGA (1920 x 1200).
The DVI-I connector combines analog and digital display technologies, promoting optimum compatibility
with different display types. Two optional analog audio inputs are also available. The 2408RGBT is
designed to operate with a companion 2408RGBR receiver to allow communication over fiber optic cable
with minimal latency.
The 2408DVIT provides the same features listed above, however, it only accepts a digital (DVI) input.
Monitoring and control of the card status and parameters are provided locally at the card-edge, or
remotely via VistaLINK®capability.
The 2408RGBT/DVIT uses Evertz SFP modules to interface to the fiber optic domain. SFP transmitters
are available in 1310nm, 1550nm, and CWDM wavelengths.
Features:
•Digital (DVI) and analog (RGB) display technologies are supported through one interface on the
2408RGBT
•2970Mb/s and 3125Mb/s user selectable Link Rates for routing and normal applications
•VESA video resolutions supported up to WUXGA (1920x1200)
•Two optional analog audio inputs
•Full 24 bits per pixel colour resolution
•True DC restoration with AGC for analog RGB input signals
•Ideal for use with high resolution LCD, plasma or projection screens
•Full-bandwidth 3 Gb/s signal transport over fiber – no compression or sub-sampling
•Evertz SFP modules are fully hot swappable from rear plate
•7708RGBT is fully hot swappable from front of frame
•All configuration settings are controlled locally through the card-edge user interface, or remotely
through VistaLINK®
•Comprehensive signal and card status monitoring are available locally on the four-digit card-edge
display, or remotely through VistaLINK®
•Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T
G.694.2 compliant)
•Selectable continuous or discontinuous laser operation modes

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Page - 2 Revision 1.1
Transmit Side Receive Side
Fiber
Type Optical/Link Budget Ordering Product Info TX
Power Ordering Product Info RX Sensitivity Description
Multi-Mode < 500m 2408RGBT-A2+13 -1dBm 2408RGBR-A2 -20dBm 1310nm on Tx and Rx fibers
Single-
Mode 12dB/34km 2408RGBT-A2+13 -1dBm 2408RGBR-A2 -20dBm 1310nm on Tx and Rx fibers
Single-
Mode 18.5dB/53km** 2408RGBT-A2+Cxx +2dBm 2408RGBR-A2 -20dBm
Different CWDM Wavelengths
for Tx & Rx, with 8Ch CWDM
Mux/Demux**
Tx Power/Rx Sensitivity are nominal values of ±1dBm
** Assumes 8Ch CWDM Mux/Demux loss of 3.5dB Fiber loss =0.35/0.25dB per km @ 1310nm/1550nm
Table 1-1: Sample Typical Fiber Application Configurations
DVI/RGB IN
TX
Interface
Control /
Indication
MUX
VistaLINK
2 Channel
Analog Audio
-A2 version
Optical
Output
Evertz SFP
Transmitter
Figure 1-1: 2408RGBT Block Diagram
DVI IN
TX
Interface
Control /
Indication
MUX
VistaLINK
2 Channel
Analog Audio
-A2 version
Optical
Output
Evertz SFP
Transmitter
Figure 1-2: 2408DVIT Block Diagram

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Revision 1.1 Page - 3
1.1. SETTING UP THE DDC VALUE
DDC (Display Data Channel) is a series of protocols that enables plug and play communication between a
graphics adapter and a computer monitor. It allows the display to communicate its supported display
modes and display parameters to the graphics adapter.
The DDC emulation mode will need to be set on the transmitter card (RGBT/DVIT) before plugging a PC
into the RGBT/DVIT card. If the DDC is subsequently changed then a full re-boot will need to occur to
allow the DDC change to take effect.
1. Ensure that the PC is off or not connected to the RGBT/DVIT card.
2. Set the DDC emulation mode depending on your system configuration:
LCD: Emulate display with digital (DVI) input and output.
CRTA: Emulate display with analog (RGB) input and analog (RGB) output.
CRTD: Emulate display with analog (RGB) input and digital (DVI) output.
3. Connect the PC to the RGBT/DVIT card and power on the computer.
"
Please note: The DDC setting can not be set and applied while the PC is on and
connected to the RGBT card. Please ensure that the PC is not connected or is
turned off when changing the DDC.

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Page - 4 Revision 1.1
2. INSTALLATION
The 2408RGBT/DVIT modules are stand-alone units that have one DVI-I video connector and (depending
on the options ordered) may also have analog audio terminals. In addition, there is a dual channel LC/PC
SFP slot to house an Evertz transmitter SFP. On the 2408RGBT models only, the DVI-I connector
supports combined analog and digital video through a single interface. An industry-standard DB-15
connector adapter may be used for RGB. Figure 2-1 shows all rear plate options for the 2408RGBT/DVIT.
When installing the Evertz SFP module into the rear plate SFP housing, align the transmit and receive
arrow indicators UPWARDS with the 2408RGBT/DVIT module upright. Gently slide the SFP module into
the rear plate SFP housing until it clicks into place.

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Revision 1.1 Page - 5
OUT
FIBER
12VDC
FAULT
OK
UNBAL
AUDIO
IN
LOOP OUTVIDEO IN
COM
BAL AUDIO IN
2408DVIT-A2
Figure 2-1: 2408RGBT I/O CONNECTIONS
2.1. OPTICAL CONNECTIONS
SFP FIBER OUTPUT: There is one LC/PC female connector when the 7708RGBT/DVIT is
equipped with an Evertz Transmitter SFP module. The optical output is available in
1310nm, 1550nm, and CWDM (ITU-T G.694.2 compliant) wavelengths. This connector is
compatible with multimode fiber when connected directly to a companion 2408RGBR/DVIR
receiver.
2.2. SIGNAL CONNECTIONS
VIDEO INPUT: The 2408DVIT accommodates digital DVI input signals only. The 2408RGBT
DVI-I connector accommodates analog and digital display technologies, promoting optimal
compatibility with different display types. Input DVI signals may be connected directly to
this port. A DB-15 RGB connection may also be accommodated using an industry standard
DB-15 to DVI-I adapter such as the Belkin F2E4162, or appropriately terminated cable
assembly such as the Amp 16539332-1.
"Note: When making digital DVI connections, Evertz recommends using only high
quality DVI cables, no longer than 6 feet (1.8m).
AUDIO INPUTS (A2 Version): The 2408RGBT/DVIT-A2 module provides a terminal block for input
connections compatible with either balanced or unbalanced analog audio. Balanced
audio signals should be connected to the positive (+) and negative (-) input terminals.
Unbalanced audio signals should be connected to the positive (+) input terminal, and a
jumper connection should be installed between the negative (-) input terminal and the
ground terminal ( ).
2.3. INTERFACING WITH 3G OPTICAL ROUTER
Figure 2-2 illustrates a typical setup using an optical router with a bidirectional 7708RGBT/DVIT
transmitter and a compatible 2408RGBR/DVIR receiver. To ensure proper system operation in
bidirectional configurations, it is important that the Tx OUT and Rx OUT are both switched at the same
time. This should be taken into account when programming router salvo operations. Note that A2KM-
USB transmitter versions can only be routed to A2KM-USB receiver versions and Non-A2KM-USB
transmitter versions can only be routed to Non-A2KM-USB receivers.

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Page - 6 Revision 1.1
2408RGBTxx
EQX
XENON
EQT
3Gb/s
Routing Core
2408RGBRDVI DVI
7708RGBT-
A2KM-USB
DVI
Analog
Audio
PS2 USB
2408RGBR-
A2KM-USB
DVI
Analog
Audio
PS2 USB
Figure 2-2: Setup Using an Optical Router

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Revision 1.1 Page - 7
2.4. CARE AND HANDLING OF OPTICAL FIBER
2.4.1. Safety
!
CLASS 1 LASER PRODUCT
Background colour: yellow
Triangular band: black
Symbol: black
2.4.2. Assembly
Assembly or repair of the laser sub-module is performed only at the Evertz facility by qualified Evertz
technical personnel.
2.4.3. Labeling
Certification and Identification labels are combined into one label. As there is not enough room on the
product to place the label, it is reproduced here in the manuals.
•There is no date of manufacture on this label as it can be traced by the bar code label placed on
the printed circuit board of each Evertz plug-in module.
•The model number is one of: 2408RGBT/DVIT+13, 2408RGBT/DVIT-A2+13,
2408RGBT/DVIT+Cxx, 2408RGBT/DVIT-A2+Cxx(xx = 27, 29, 31, 33, 35, 37, 43, 45, 47, 49, 51,
53, 55, 57, 59, 61) with additional suffixes as above.
Figure 2-3: Reproduction of Laser Certification and Identification Label

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Page - 8 Revision 1.1
2.4.4. Handling and Connecting Fibers
"
Never touch the end face of an optical fiber. Always keep dust caps on optical fiber
connectors when not connected and always remember to clean the optical end face
of a connector properly before making a connection.
The transmission characteristics of the fiber are dependent on the shape of the optical core and therefore
care must be taken to prevent fiber damage caused by heavy objects or abrupt fiber bending. Evertz
recommends that you maintain a minimum bending radius of 5 cm to avoid fiber-bending loss that will
decrease the maximum attainable distance of the fiber cable. Evertz fiber optic modules come with
lockout devices to prevent the user from damaging the fiber connector by installing a module into a slot in
the frame that does not have a suitable rear plate. For further information about care and handling of fiber
optic cable, see section 3 of the Fiber Optics System Design section of this manual binder.

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Revision 1.1 Page - 9
3. SPECIFICATIONS
"Video and audio performance specifications are measured at the output of a
companion 2408RGBR/DVIR Receiver.
3.1. ANALOG VIDEO INPUTS
Number of Signals: 1
Signal Type: RGB
Sync Type: H and V, or Sync on Green
Connector: DVI-I with Analog or 15-pin HD-15 VGA Analog (with adapter)
Display Resolution: Up to WUXGA, 1920x1200 @ 75Hz
Colour Depth: 24 Bit
Analog Bandwidth: 300MHz (max)
Impedance: 75Ω
SNR: >55dB
Input Level: 1Vp-p (max)
Linear Distortion: 2% (max)
Intensity Distortion: 2% (max)
3.2. DIGITAL VIDEO INPUTS
Number of Signals: 1
Signal Type: TMDS, per DVI specification
Connector: DVI-I
Display Resolution: Up to WUXGA, 1920x1200 @ 75Hz
Colour Depth: 24-Bit
3.3. DIGITAL VIDEO CONTROL
Number of Signals: 1
Signal Type: DDC2B, per DVI specification
Connector: DVI-I
3.4. ANALOG AUDIO INPUTS (A2 VERSION)
Number of Signals: 2
Connector: Removable Terminal Block
Input Level: +24dBu (max)
Input Impedance: 20kΩ(min, differential)
Frequency Response: ±0.1dB (max, 20Hz to 20KHz)
THD: < 0.005% (max, 20Hz to 20KHz, @ 0dBFS)
S/N Ratio: >85dB (min)
Channel Phase: ±1° (max, 20Hz to 20KHz)
Signal Quantization: 24 bits

2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Page - 10 Revision 1.1
3.5. OPTICAL OUTPUT
Connector: LC/PC (female)
Fiber Size and Type: Single Fiber versions:9 µm core / single mode
Output Wavelengths:
Standard: 1310nm, 1550nm (nominal)
CWDM: 1270nm to 1610nm (ITU-T G.694.2 compliant)
Output Power:
1310nm FP (Standard): -1 dBm ±1dBm
CWDM DFB: +2 dBm ±1dBm
3.6. ELECTRICAL
Voltage: 12V DC (nominal)
Power: 11 Watts (max)
3.7. PHYSICAL
Stand Alone units
Dimensions
With Flanges: 7.81" L x 5.63" W x 1.75" H
(199mm L x 143mm W x 45mm H)