fantastic furniture Cooper Lowboy 3 Drawer User manual

Version1.0
ooper
Lowboy3Drawer
www.fantasticfurniture.com.au

Enjoy
Yourpurchasefrom
Australia sBest Value FurnitureStore
PAGE2
www.fantasticfurniture.com.au
WARNING: ENSURETHEWALL STRAP ISATTACHEDTO
AVOIDSERIOUSINJURY.
Toavoid anyseriousor fatal injury,thisproducthasbeenprovided witha
wallstraptopreventtoppling.Westronglyrecommendthatthis product is
permanentlyfixedtothewallorothersuitablesurface.Fixing devices are
notincludedsincedifferentsurfacematerialsrequire different attachments.
Pleaseseekprofessionaladviceifyouare indoubtofwhat fixing deviceto
use.

PAGE3
Assembly checklist
Useful Information
Readthrough theinstructionscarefully
beforeyoubegin. Makesureyouhave alltherequiredtools.
Never use powertoolsunlessinstructed.
Identifyand layout all ofthecomponents
beforeyoubeginassembly. Unless instructed,do notfullytighten screws until the item isfullyassembled.
! Neveruse powertoolsunless specificallyinstructed.They can damage yourcomponentsor
hardwareif used incorrectly.
! The most common mistakes made during assemblyareusing the wrong hardwareorgetting
componentsback tofront.
! Always use asoft surface (such as carpet orcardboard)when assembling yourproduct to
avoidscratching ordamaging the surface of the product.
! Bulky itemssuch as wardrobes and bunk bed shouldbe assembled inthe roomthey will be
used inas they may not fit through adooronce assembled.
! Neveruse any glue until you arecertainthat the partsbelong together.
! Periodicallycheck and re-tighten all fasteners. Check the product carelabel orwebsitefor
product careinstructions.
! If you arehaving any difficulties assembling yourproduct, missing any hardwareor
componentsplease visit ourwebsiteHelpCentreforfurtherassistance.
! Please see page 2forany safetyrequirementsorweight restrictions.

PAGE4
WhatYouNeed
ToAssembletheProduct
www.fantasticfurniture.com.au
OtherTools You Need
PhillipsHeadScrewdriver
PartLIst
Box1:
1xTop Panel(P1);
1xLeft Side Panel(P2);
1xRight Side Panel(P3);
1x TopPanel Rail (P4);
1xFront Rail (P5);
1 xMiddleBackSupport Rail(P6);
1 xBottomBackSupport Rail(P7);
2xBack Panel(P8);
3xDrawerFront (P9);
3xLeft DrawerSide (P10);
3xRightDrawerSide(P11);
3x DrawerSupportRail(P12);
3xDrawerBack(P13);
3xDrawerBase(P14);
HardwarePack
TopPanel
(P1)
Left Side
Panel
(P2)
RightSidePanel
(P3)
BackPanel
(P8)
TopPanel Rail
(P4)
DrawerFront
(P9)
RightDrawerSide
(P11)
Drawer Back
(P13)
DrawerBase
(P14)
FrontRail
(P5)
Bottom Back Support
Rail(P7)
MiddleBack Support
Rail(P6)
BackPanel
(P8)
x3

Step 2
PAGE5
www.fantasticfurniture.com.au
Step 1
Insert2xwoodendowels(H3)intothefront rail (P5).
Insert2xwoodendowels(H3)intothemiddleback support rail (P6).
Insert2xwoodendowels(H3)intothebottomback support rail (P7).
Fix4xlargecambolts(H1)totheleftsidepanel(P2)bytightening withaphillips head
screwdriver.
Insert2xwoodendowels(H3)intotheleft side panel (P2).
2x Wooden
Dowels
(H3)
Phillipshead
screwdriver
You will need
4x LargeCam
Bolts (H1)
You will need
6x Wooden
Dowels
(H3)
(P2)

Step 4
PAGE6
www.fantasticfurniture.com.au
Step 3
Fix3xleftrunnertracks(H7)totheleftsidepanel(P2)with9xwood screws(H11) into
the pre-drilled holes by tighteningwithaphillips headscrewdriver.
Fix4xlargecambolts(H1)totherightsidepanel(P3)bytightening withaphillips head
screwdriver.
Insert2xwoodendowels(H3)intotheright side panel (P3).
2x Wooden
Dowels
(H3)
Phillipshead
screwdriver
You will need
4x LargeCam
bolts (H1)
9x WoodScrews
(H11)
3x Left Runner
Track (H7)
You will need
Phillipshead
screwdriver
(P2)
(P3)

Step 6
PAGE7
www.fantasticfurniture.com.au
Step 5
Fix3xrightrunnertracks(H8)totherightsidepanel(P3)with9xwoodscrews(H11) into
the pre-drilled holes by tighteningwithaphillips headscrewdriver.
Insertlargecamnuts(H2)intothebacksupportrails(P6,P7).Rotatethe cam nuts(H2) so
thearrowispointingtowardstheincoming cam bolt (H1).
Tofixthebacksupportrails(P6,P7)totherightsidepanel (P3), use the phillips head
screwdrivertotightenthecam nuts(H2).
9x WoodScrews
(H11)
3x RightRunner
Track (H8)
You will need
Phillipshead
screwdriver
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
2xLarge
Cam Nuts (H2) Phillipshead
screwdriver
You will need
(P3)
(P3)
(P6)
(P7)

Step 8
PAGE8
www.fantasticfurniture.com.au
Step 7
Insertlargecamnuts(H2)intothetoppanelrail(P4)andthefrontrail (P5). Rotatethe cam
nuts(H2)sothearrowispointingtowardstheincoming cam bolt (H1).
Tofixthetoppanelrail(P4)andfrontrail(P5)totherightsidepanel (P3), use the phillips
headscrewdrivertotighten thecam nuts(H2).
Insertlargecamnuts(H2)intothetoppanel rail (P4) ,
frontrail(P5)andbacksupportrail(P6, P7). Rotatethe
camnuts(H2)sothearrowispointing towards the
incomingcambolt (H1).
Tofixthetoppanelrail(P4),frontrail (P5) and back
supportrail(P6,P7)totheleftsidepanel (P2), use the
phillipsheadscrewdrivertotighten thecam nuts(H2).
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
2xLarge
Cam Nuts (H2) Phillipshead
screwdriver
You will need
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
4xLarge
Cam Nuts (H2) Phillipshead
screwdriver
You will need
(P6)
(P7)

Step10
PAGE9
screwdriver.
www.fantasticfurniture.com.au
Step 9
Turntheunituprightcarefully, slip2xbackpanels(P8)intothegroovesontheside
panels(P2)&(P3).
Fix6xlargecambolts(H1)tothetoppanel(P1)bytightening withaphillips head
Phillipshead
screwdriver
You will need
6x LargeCam
bolts (H1)
backpanelwith
laminationfacing
outside,
informativelabel
nearbytop

Step12
PAGE10
www.fantasticfurniture.com.au
Step11
Fixthetoppanelrail(P4)tothetop panel (P1)
with2xwoodscrews(H4)bytightening witha
phillipsheadscrewdriver.
Phillipshead
screwdriver
You will need
Insertlargecamnuts(H2)intotheleft side panel (P2)
andrightsidepanel(P3).Rotatethecam nuts(H2) so
thearrowispointingtowardstheincoming cam bolt (H1).
Tofixtheleftsidepanel(P2)andrightside panel (P3) to
the toppanel(P1),usethe phillips headscrewdriver to
tightenthecamnuts(H2).
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
6xLarge
Cam Nuts (H2) Phillipshead
screwdriver
You will need
2xWood
Screws (H4)