fantastic furniture Bridge Buffet User manual

Bridge
Buffet

r

2x
Top(P1)
Bottom(P2)
Right Panel(P3)
Left Panel(P4)
Middle Panel(P5)
Long Support(P6)
Short Support(P7)
Long Shelf(P8)
Short Shelf(P9)
2 x Long Back Panels(P10)
Short Back Panel(P11)
Left Door(P12)
2 x Right Door(P13)
Hardware Pack
20 x Cam Bolts
(H1)
20 x Cam Nuts
(H2)
24 x Dowels
(H3)
6 x Hinges
(H4)
48 x Short Screws
(H5)
2 x Legs
(H6)
12 x Washers
(H7)
12 x Long Bolts
(H8)
1 x Allen Key
(H9)
4 x Levelling Feet
(H10)
12 x Wedges
(H11)
1 x Long Screw
(H12)
1 x Support Leg
(H13)
2 x Short Bolts
(H14)
2 x Dowels
(H15)
2 x Washers
(H16)
1 x Wall Strap
(H17)

2 x Short Bolts
(H14)
1 x Allen Key
(H9)
2 x Legs
(H6)
12 x Washers
(H7)
12 x Long Bolts
(H8)
1 x Allen Key
(H9)
4 x Levelling Feet
(H10)
Using 2 x Short Bolts(H4) secure the Support Leg(H13) to the Unit Bottom(P2)
by tightening with Allen Key(H9).
Using 6 x Washers(H7) and 6 x Long Bolts(H8) secure the Table Leg(H6) to the
Unit Bottom(P2) by tightening with Allen Key(H9)
Repeat the previous step to attach the second Table Leg(H6).
Screw in 4 x Levelling Feet(H10) to the bottom of the Table Legs(H6)
Ensure the Levelling Feet are screwed in firmly.If your flooring surface is
uneven adjust the Levelling Feet accordingly.
1 x Support Leg
(H13)

6 x Cam Bolts
(H1)
6 x Dowels
(H3)
Phillips Head
Screwdriver
Phillips Head
Screwdriver
6 x Dowels
(H3)
6 x Cam Bolts
(H1)
Insert 6 x Dowels(H3) into Unit Bottom(P2) and secure 6 x Cam Bolts(H1)
to Unit Bottom(P2) by tightening with the Phillips Head Screwdriver.
Insert 2 x Dowels(H3) into Middle Right Panel(P3) and secure 2 x Cam Bolts(H1)
to Middle Right Panel(P3) by tightening with the Phillips Head Screwdriver.
Repeat previous step for Left Panel (P4) and Middle Panel(P5).
(P3)
(P2)

Phillips Head
Screwdriver
2 x Cam Nuts
(H2)
2 x Dowels
(H3)
Insert 2 x Cam Nuts(H2) into Short Shelf(P9) as shown.Rotate the cam nuts
so the arrows point towards the incoming cam bolts.
Attach Short Shelf(P9) to Right Panel(P3) by tightening the cam nuts(H2)
with the Phillips Head Screwdriver
Insert 2 x Dowels(H3)into Right Panel(P3) and connect Short Support(P7)
to Right Panel(P3).
(P3)
(P3）

Page 8
7
8
2 x Cam Nuts
(H2)
Phillips Head
Screwdriver
2 x Cam Nuts
(H2)
Phillips Head
Screwdriver
Insert 2 x Dowels(H15) into Middle Panel(P5)
Insert 2 x Cam Nuts(H2) into Short Shelf(P9) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Short Shelf(P9) to Middle Panel(P5) by tightening the Cam Nuts(H2)
with the Phillips Head Screwdriver
Connect Long Support(P6) to Middle Panel(P5) by Dowels(H15).
Insert 2 x Cam Nuts(H2) into Long Shelf(P8) as shown. Rotate the cam nuts
so the arrows point towards the incoming cam bolts.
Attach Long Shelf(P8) to Middle Panel(P5) by tightening the
Cam Nuts(H2) with the Phillips Head Screwdriver
2 x Dowels
(H15)
（P7)
(P9)
(P6)
(P5)

Page 9
9
10
2 x Cam Nuts
(H2)
2 x Dowels
(H3)
Phillips Head
Screwdriver
Insert 2 x Dowels(H3) into Left Panel(P4) to connect with Long Support(P6).
Insert 4 x Cam Nuts(H2) into Long Shelf(P8) as shown. Rotate the cam nuts
so the arrows point towards the incoming cam bolts.
Attach Long Shelf(P8) to Left Panel(P4) by tightening the Cam Nuts(H2)
with the Phillips Head Screwdriver
Turn over the Buffet
Slide Long Back Panel(P10) into the groove of Left Panel(P4) and Middle Panel(P5)
as shown.
(H2)
(H3) (P6)
(P8)

Page 10
11
12
6 x Cam Bolts
(H1)
6 x Dowels
(H3)
Insert 6 x Dowels(H3) into Unit Top(P1) and secure 6 x Cam Bolts(H1) into Unit Top(P1)
by tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
6 x Cam Nuts
(H2)
Insert 6 x Cam Nuts(H2) into Panel(P3&P4&P5) as shown.Rotate the
cam nuts so the arrows point towards the incoming cam bolts.
Attach Top(P1) to Panel(P3&P4&P5) by tightening the Cam Nuts(H2)
with the Phillips Head Screwdriver
(P1)

Page 11
13
14
Turn over the Buffet
Slide another Long Back Panel(P10) and Short Back Panel(P11)into the groove.
Phillips Head
Screwdriver
6 x Cam Nuts
(H2)
Insert 6 x Cam Nuts(H2) into Panel(P3&P4&P5) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Bottom(P2) to Panel(P3&P4&P5) by tightening the Cam Nuts(H2)
with the Phillips Head Screwdriver
(P11) (P10)
(P2)

Page 12
15
16
Using 4 x Short Screws(H5) to connect 2 x Hingers(H4) to Right Door(P13)
Adjust the door then tighten all screws with a Phillips Head Screwdriver.
Repeat previous step for Anther Right Door(P13) and Left Door(P12)
6 x Hinges
(H4)
12 x Short Screws
(H5)
24 x Short Bolts
(H5)
Using 8 x Short Screws(H5) to connect Right Door(P13) to
Buffet by tightening with a Phillips head screwdriver.
Repeat previous step for Right Door(P13) and Left Door(P12)

Page 13
17
18
12 x Wedges
(H11)
12 x Short Screws
(H5)
Phillips Head
Screwdriver
Insert 12 x Wedges(H11) into all corners of the back of the assembled unit as shown.
Secure Wedges(H1) by tightening 12 x Short Screws(H5) with the
Phillips Head Screwdriver.
16
17
15
16 1
12
1 x Long Screw
(H12)
1 x Washers
(H16)
1 x Wall Strap
(H17)
17
16
5
12
12
Long

Page 14
19
20
(H16)
16
1 x Washers
(H16)