fantastic furniture Torkay User manual

Version1.0
Hall Table 2DrawerWhite Walnut
Trkay
fantasticfurniture.com.au

二页PDF

Assembly checklist
Useful Infrmatin
Read throughtheinstructionscarefully
beforeyoubegin. Makesure youhavealltherequiredtools. Neveruse power tools unlessinstructed.
Identify andlayoutall of thecomponents
beforeyoubeginassembly. Unless instructed, donotfullytighten screws untilthe itemisfully assembled.
Never use power tools unless specifically instructed.They can damageyourcomponents
or hardware if usedincorrectly.
The most common mistakes madeduring assembly are using the wrong hardware or
getting components back to front.
Always useasoft surface(suchas carpet or cardboard) when assembling yourproduct
to avoidscratching or damaging the surfaceof the product.
Bulky itemssuchas wardrobes andbunk bedshouldbeassembled in the roomthey will
beusedin as they may not fit throughadoor onceassembled.
Never use any glue until you are certain that the parts belong together.
Periodically check andre-tighten all fasteners.Check the productcare label or website
for product care instructions.
Ifyou are having any difficulties assembling your product,missing any hardware or
components please visit our website HelpCentre for further assistance.
Page3
fantasticfurniture.com.au
!
!
!
!
!
!
!
Please see page2for any safety requirements orweight restrictions.
!

Whaty u Need
Toassembletheproduct
fantasticfurniture.com.au
Othertls yu need:
Phillips HeadScrewdriver
Mallet(softheaded) X2
Part List
1 xTopPanel (P1);
1 xLeftSide(P2);
1 xRight Side(P3);
1 xTopPanel Rail (P4);
1 xFront Support Rail (P5);
1 xCenterPanel (P6);
1 xBackPanel (P7);
1 xBottom Shelf (P8);
1 xMiddleFoot(P9);
2xDrawerFronts(P10);
2xLeftDrawerSides (P11);
2xRight DrawerSides (P12);
2xDrawerBacks(P13);
2xDrawerBases (P14);
2xDrawerSupport Rails(P15).
Page4
Hardware pack
Top Panel
(P1)
BackPanel
(P7)
LeftSide
(P2)
RightSide
(P3)
FrontSupportRail
(P5)
TopPanelRail (P4)
DrawerFront
(P10)
DrawerBack
(P13)
Centre Panel
(P6)
BottomShelf (P8)
MiddleFoot(P9)
DrawerSupport
Rail(P15)
DrawerBase
(P14)
RightDrawer
Side (P12)
LeftDrawer
Side (P11)

Youwillneed:
Youwillneed:
7xWooden
Dowels(H3)
Attach8xlargecambolts(H1)totoppanel(P1)using aphillipsheadscrewdriver.
Insert 7xwoodendowels (H3) intotoppanelrail(P4),frontsupport rail(P5)
andbottomshelf(P8)as shown.
Phillips Head
Step2
Step1
Page5
Screwdriver
fantasticfurniture.com.au
(H1)x8
(H3)x2
(H3)x4
(H3)
(P4)
(P8)
Mallet(soft
headed)
8xLarge
CamBolts(H1)
(P5)
(P1)

Step4
Step3
Page6
fantasticfurniture.com.au
Youwillneed:
6 xLarge
CamBolts
(H1)
2x Wooden
Dowels
(H3)
Attach6xlargecambolts(H1)toleftside(P2)using aphillipsheadscrewdriver.
Insert 2xwoodendowels (H3) intoleftside(P2).
Attach1xleftrunnertrack(H11)toleftside(P2)using 3x smallscrews (H7),tightening
withaphillipsheadscrewdriver.Ensurethescrews areinserted into theholes shown in
theimageabove.
1 xLeft
RunnerTrack
(H11)
3xSmall
Screws
(H7)
Youwillneed:
1xRight
RunnerTrack
(H12)
2x Wooden
Dowels
(H3)
Attach6xlargecambolts(H1)torightside(P3) usingaphillipsheadscrewdriver.
Insert2xwoodendowels(H3)intoright side(P3).
Attach1xrightrunnertrack (H12) torightside(P3)using3xsmallscrews (H7),
tightening with aphillipshead screwdriver.Ensure thescrewsare insertedinto the
holesshowninthe imageabove.
Phillips Head
Screwdriver
Phillips Head
Screwdriver
3xSmall
Screws
(H7)
(H3)x2
(H1)x6 (H7)x3
(H11)
Mallet(soft
headed)
Mallet(soft
headed)
6 xLarge
CamBolts
(H1)
(P2) (H7)
(H7)x3
(H3)x2
(H1)x6
(H12)

Step6
Step5
Page7
fantasticfurniture.com.au
4xWooden
Dowels
(H3)
2xLarge
CamBolts
(H1)
Phillips Head
Screwdriver
Youwillneed:
Attach2xlargecambolts(H1)toback panel (P7) usingaphillipsheadscrewdriver.
Insert 4xwoodendowels (H3) intoback panel.
Attachmiddlefoot (P9) tobottomshelf (P8) by turning clockwisetofully lock.
(P8)
(P9)
(H1)x2
(H3)x4
(P7)
Mallet(soft
headed)

Step7
Page8
fantasticfurniture.com.au
Step8
2xLarge
CamNuts(H2)
Youwillneed:
Phillips Head
Screwdriver
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Attachcentrepanel(P6)to back panel(P7).Insert 2xlargecamnuts
(H2)intothecentrepanel(P6).Usingaphillipsheadscrewdriver,rotate
the camnuts so thearrowpointstowardstheincomingcambolt.Turn
clockwiseto lock.
Youwillneed:
4xWooden
Dowels
(H3)
1 xLeft
RunnerTrack
(H11)
6 xSmall
Screws
(H7)
Phillips Head
Screwdriver
Insert 4xwoodendowels (H3) intocentrepanel(P6).
Attach1x right runner track(H12) totheleftsideof the
centre panel (P6) using3x small screws(H7),tightening
withaphillipsheadscrewdriver.
Turnover thecentrepanel(P6)andattach1xleftrunner
track (H11) using3x small screws(H7),tighteningwith a
phillipshead screwdriver.
Ensure thescrewsare insertedthroughthe holes shown
intheimageabove.
(P6)
1xRight
RunnerTrack
(H12)
(H11)
(H12)
(H3)x4
(H2)x2
(P6)
(P7)
Mallet(soft
headed)
Note:the leftsideofthecentre panel (P6) has camnutholes at the top.
(H12)
(H7)
firsthole
secondhole

Step10
Step9
Page9
fantasticfurniture.com.au
2xLarge
CamNuts(H2)
Youwillneed:
Phillips Head
Screwdriver
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Withassistance,attachbackpanel(P7)to leftside(P2).Insert2x largecamnuts (H2)
intoback panel (P7).Usingaphillipshead screwdriver,rotate thecamnutsso the
arrowpoints towardsthe incomingcambolt.Turn clockwise to lock.
1 xLarge
CamNut(H2)
Youwillneed:
Phillips Head
Screwdriver
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Attachtop panelrail (P4) toleftside(P2),ensuringthesidewithcamnutholes
facesinwards.Insert 1xlargecamnut(H2) intotoppanelrail(P4).Usinga
phillipshead screwdriver,rotate thecamnutssothearrowpoints towardsthe
incomingcambolt.Turnclockwise to lock.
(P7)
(P2)
(H2)
(H2)
(P4)
(H2)x2
(P4)
(P2)

Step12
Step11
Page 10
fantasticfurniture.com.au
1 xLarge
CamNut(H2)
Youwillneed:
Phillips Head
Screwdriver
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Attachfront supportrail(P5) to leftside,ensuringthe sidewithcamnutholes
facesdown.Insert 1xlargecamnut(H2) intosupport rail(P5).Usingaphillips
head screwdriver,rotate thecamnutso thearrowpointstowardsthe incoming
cambolt.Turnclockwise to lock.
2xLarge
CamNuts(H2)
Youwillneed:
Phillips Head
Screwdriver
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Withassistance,attachbottomshelf (P8) toleftside(P2).Insert2x largecam
nuts(H2)intothe bottomshelf(P8).Using aphillipsheadscrewdriver,rotate
the camnutsothe arrow pointstowardstheincoming cambolts.Turn
clockwiseto lock.
(P2)
(P5)
(P5)
(H2)
(H2)
(P8)
(H2)x2

Page 11
fantasticfurniture.com.au
Step13
Step14
Step13
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Youwillneed:
1 xLarge
Screw(H4) Phillips Head
Screwdriver
Withassistance,attachrightside(P3)to theassembledunit.Insert 6x largecam
nuts(H2)intothe top panelrail (P4),front supportrail(P5) and bottomshelf(P8).
Usingaphillipsheadscrewdriver,rotatethe camnuts so thearrowpointstowards
the incomingcambolts.Turnclockwiseto lock.
Attachfront supportrail(P5) to centrepanel(P6)using1xlargescrew (H4),
tighteningwithaphillipshead screwdriver.
Withassistance,carefully turntheassembledunitupright.
Attachtop panel(P1)to theunitas shown.Insert8x largecamnuts (H2) into the
leftandrightsides(P2,P3),backpanel(P7)andcentrepanel(P6).Usingaphillips
head screwdriver,rotate thecamnutso thearrowpointstowardsincomingcam
bolt.Turnclockwisetolock.Attachtop panelrail (P4) totoppanel (P1) using4x
largescrews(H4),tightening withaphillipsheadscrewdriver.
Youwillneed:
4 xLarge
Screws (H4) Phillips Head
Screwdriver
(P4)
(H4)
(H2)x8
(P1)
(H2)
(P2)
6 xLarge
CamNuts(H2)
8xLarge
CamNuts(H2)
(H2)x6
(P2)
(P5)
(P6)
(P3)
(H4)

Step16
Step15
Page 12
fantasticfurniture.com.au
Attach5 xsmallcambolts(H9)todrawerfront(P10) usingaphillipsheadscrewdriver.
Repeat thisprocessforthe other drawerfront.
Youwillneed:
10xSmall
Cambolts(H9) Phillips Head
Screwdriver
Attach1xleftdrawerside(P11)and 1x rightdrawer side(P12) todrawer front,
ensuringthe groovesonall panelsalign.Insert 4xsmallcamnuts(H10) into
drawer sides (P11,P12).Usingaphillipshead screwdriver,rotate thecamnutsso
the arrow pointstowardsincomingcambolt.Turn clockwise to lock.
Repeat thisprocessforthe other drawersides(P11,P12).
Youwillneed:
Phillips Head
Screwdriver
8xSmall
CamNuts(H10)
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
(H9)x5
(P10)
(P10)
(P11)
(P12)
(H10)x4
X2
X2

Step18
Step17
Page 13
fantasticfurniture.com.au
Attach1xdrawersupportrail (P15) to drawerfront(P10),ensuringthe sidewith the
camnuthole faces outwards.Insert1x small camnut(H10) intodrawer support rail
(P15).Usingaphillipshead screwdriver,rotate thecamnutso thearrowpoints
towardsincoming cambolt.Turnclockwiseto lock.
Repeat thisprocessforthe other drawersupport rail(P15).
Youwillneed:
Phillips Head
Screwdriver
2xSmall
CamNuts(H10)
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Slide1xdrawerbase(P14)intothegroovesonthe drawer sides (P11,P12)
and drawerfront(P10).
Repeat thisprocessforthe other drawerbase (P14).
(H10)
(P10)
(P11)
(P12)
(P14)
(P15)
X2
X2
withpaperlamination
faceinside

Step20
Step19
X2
Page 14
fantasticfurniture.com.au
X2
Attach1xdrawerbackpanel(P13)todrawersides(P11,P12)anddrawer supportrail
(P15)using 6xmediumscrews(H8),tightening withaphillipsheadscrewdriver.
Repeat thisprocessforthe other drawerback panel (P13).
You will need:
Phillips Head
Screwdriver
12xMedium
Screws(H8)
Youwillneed:
4 x Handle
Screws(H5) 2xHandles
(H6) Phillips Head
Screwdriver
Attach1xhandle(H6)toassembleddrawer using2xhandlescrews (H5),
tighteningusingaphillipsheadscrewdriver.
Repeat thisprocessforthe other handle(H6).
(P13)
(P11)
(P12)
(H6)
(H5)x2
(H8)x6

Step21
Page 15
fantasticfurniture.com.au
Slidethe drawersintotheassembledunit.
12xSmall
Screws(H7) 2xLeft
Runners(H13)
2xRight
Runners(H14)Phillips Head
Screwdriver
Youwillneed:
Step22
Attach1xleftrunner(H13)and1x right runner(H14)tothebottomof drawer sides
(P11,P12),ensuringthe stoppers areatthebackoftheassembleddrawer,using6x
smallscrews(H7)and tighteningwithaphillipsheadscrewdriver.
Repeat thisprocessforthe other setofrunners (H13,H14).
(P11)
(H13)
(H14)
(H7)x3
X2
(H13) (H7)x3
(P11)

Westronglyadvisethatyouuse
thewall safety strapprovidedto
preventtheunittoppling.
Attach2xwall straps(H15)tothebackofthetoppanel (P1) using2x medium
screws(H8)and 2xwashers(H16),tightening using aphillipsheadscrewdriver.
Step23
Page 16
fantasticfurniture.com.au
(H15)x2
(H16)x2
(H8)x2
Youwillneed:
2xMedium
Screws(H8) 2xWall straps
(H15)
2xWashers
(H16) Phillips Head
Screwdriver

2xWashers
(H16)
Step24
Seekadvicefromaqualified
tradespersononhowto
attachsafetystrapto
thewall.
With assistance,move thehall
tableto itsfinal position.
Attachthesafety straptothe
wall.Ensure itisfirmly
attachedand secure.
Screwand Wall Plugarenot
provided.
Please use appropriatefixtures
foryourwall.
Page 17
fantasticfurniture.com.au
Youwillneed:
Phillips Head
Screwdriver
(H16)x2

Page 18
fantasticfurniture.com.au
Step25