fantastic furniture Cabin User manual

fantasticfurniture.com.au
Cabin
Toddler Bed
Version 1.1

Page 2
fantasticfurniture.com.au
Looks like you've found
your Fantastic!
We're thrilled you've chosen Fantastic Furniture
to help create a home you'll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Assembly checklist
Useful Information
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most commom mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasterners. Check the product care label or
website for product care instructions.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
Page 3
fantasticfurniture.com.au

What you need
to assemble the product
Other tools you need
Phillips head screwdriver, soft headed
mallet.
Parts list
Box 1:
Head Board (P1);
Foot Board (P2);
3 x Base Panel (P6);
Hardware.
Box 2:
Centre Support (P3);
Side Panel L (P4);
Side Panel R (P5).
8 x Barrel Nuts
(H1)
12 x Screws
(H4)
1 x Allen Key
(H7)
Head Board
(P1)
Foot Board
(P2)
Centre Support
(P3)
Side Panel L
(P4)
Side Panel R
(P5)
Mattress
Base Panel
(P6)
8 x Bolts
(H2)
10 x Wood Dowels
(H3)
2 x Cam Nuts
(H5)
2 x Cam Bolts
(H6)
Page 4
fantasticfurniture.com.au

Step 1
Step 2
H6
P3
H5
You will need
2 x Cam Bolts
(H6)
8 x Barrel Nuts
M6 (H1)
2 x Cam Nuts
(H5)
Insert 2 x cam nuts (H5) into panel (P3).
Insert 8 x barrel nuts (H1) into panels (P4) & (P5).
Screw 2 x cam bolts (H6) into panels (P4) & (P5) by using a philips head
screwdriver.
H3
P3
Insert 10 x dowels (H3) into panels (P3), (P4) & (P5) by hand or gently using a
soft headed mallet.
10 x Wood Dowels
(H3)
Soft Headed
Mallet
H1
H6
P4
P5
H3
P4
P5
Phillips Head
Screwdriver
You will need
Page 5
fantasticfurniture.com.au
H1
H1
H1
H1
H1
H1
H1 H5
H6
H3
H3
H3
H3
H3
H3
H3
H3
H3

8 x Bolts
(H2)
1 x Allen Key (H7)
Secure panels (P1) & (P2) to panels (P4) & (P5) with 8 x bolts (H2) using an
allen key.
Attach panels (P4) & (P5) to panel (P3).
Turn the cam nuts on panel (P3) clockwise with a phillips head screwdriver
to lock in position.
H2
P1
P2
P4
P5
P4
P5
P3
Note: Do not over tighten the bolts.
Step 3
You will need
Phillips Head
Screwdriver
Step 4
You will need
Page 6
fantasticfurniture.com.au
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
H7

12 x Screws
(H4) H4
P6
P6
P6
Job Complete!
In the interest of our environment please dispose of all packaging
thoughtfully.
Secure panels (P6) with 12 x screws by using a philips head screwdriver. Please note the
gap dimensions in the above diagram.
Slat Position
P1
P6
First Slat
Second Slat
Third Slat
P2
Gap 30mm ±
Gap 51mm±
Gap 51mm±
Gap 30mm±
Step 5
You will need
Phillips Head
Screwdriver
Page 7
fantasticfurniture.com.au
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
P6
P6