fantastic furniture GALWAY User manual

AssemblyInstructions
GALWAY
Tallboy5Drawer
Ver1.1

Page 2
2
3
5
6
Read Instructions carefully.
Lay out all of the components on a soft surface
as if you were preparing to do a jigsaw puzzle.
Carefully identify each component, especially
those that are similar. The most common mistake
is getting things back to front.
Separate and identify each component from the
hardware pack and rest each one in its proper
W
A
R
N
N
G
WARNING
Check no parts are missing.
4
fully tighten screws（leave slightly
loose).When the item is fully assembled
tighten the screws - but do not over tighten.
FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE
THAT IS NOT COVERED BY YOUR WARRANTY
If glue is required DO NOT set until you are
certain that the parts belong together.

WhatyouNeed
To AssembletheBody
Page3
Pleasemakesureyouhaveallthesepartsbeforeyoustart.
4xPlasticfeet
Ø22 x5mm
(H1)
DONOTUSE
(Toolnotprovided)
PhillipsHeadScrewdriver
Hammer

Page 4
Removethe pallet and cardboard.
You willneed:
Turnthe carton upside down(BottomUp). Open thecarton and removethe cornerprotectors.
Usingascrewdriver,loosenthe8screwsonthepallet.

Page 5
Turnthe carton over, removethe carton and all packaging material.
You willneed:
(H1) (H1)
(H1)
(H1)
4xPlastic
feet
Ø22x5mm
(H1)
Useahammertonail the plasticfeet (H1)tothe legs.

Page 6
You willneed:
!
!
You willneed:
Note: Thecorrecttypeofwall
screwsmustbeusedforyour
wall. Please seek professional
adviceifindoubt.
Thereisan anti-topplestrap fitted tothe back of the Tallboy. Chooseasuitable
wall fixing, and then fasten the strap tothe wall asshown.
The handlesarefitted on the inside of the drawerstoprotect themduring transport. Open the drawers,
unscrewthe handles, and then fixthemon the outside asshown.

Page 7
The job isnowcomplete!
Intheinterestofourenviroment
Pleasedisposeof all thepackagingthoughtfully.