fantastic furniture Alfa User manual

Version 1.0
Alfa
Utility 2 Door
fantasticfurniture.com.au

Secure it!
Wall attachment guide
or plasterboard
(with available wood stud)
Screw inserted directly into
stud.
ARNIN N UR TH A TRAP I ATTACH T
A I RI U IN UR R ATH.
included since dierent surface materials require dierent attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
•
•
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
• Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
• Avoid putting a on this product.
Reduce the risk of furniture
tip-over accidents
Page 2
or plasterboard
(without available wood stud)
Self drilling plasterboard
anchor.
or asonry wall
Screw
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.
Recommended weight capacity: 10kg per Shelf

Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Git Card!
@fantasticfurniture
fantasticfurniture.com.au Page 3

fantasticfurniture.com.au Page 4
Assembly checklist
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identiy and lay out all of the compenents
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Useful information
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a sot surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky itmes such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasterners. Check the product care label or website for
product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.

fantasticfurniture.com.au Page 5
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Mallet.
Parts list
2x Side Panels (P1);
Top Panel (P2);
Bottom Panel (P3);
2x Shelf Panels (P4);
Door Panel Let (P5);
Door Panel Right (P6);
3x Back Panels (P7)
Hardware pack
16 x Long Screws
(H1)
2 x Magnet
With Legs
(H2)
4 x Rectractable
Door Studs
(H3)
2 x Handles
(H4)
4 x Pan Head
Screws #6 × 16.5
(H5)
4 x Wood Dowels
M6 × 25
(H6)
16 x Stickers
(H7)
Side
Panel
(P1)
Side Panel
(P1)
Top Panel
(P2)
Door Panel Let
(P5)
Bottom Panel
(P3)
Shelf Panel
(P4)
Shelf Panel
(P4)
Back Panel
(P7)
1 x Flat
Washer
(H11)
2 x Magnet
Plates
(H12)
4 x Screws
M3.5 × 12
(H13)
4 x Dowel Plugs
(H8)
1 x Webbing
(H9)
1 x Pan Head
Screw M3.5 × 12
(H10)
Door Panel Right
(P5)
4 x Corner
Blocks
(H14)
4 x Screws
M3 × 20
(H15)

fantasticfurniture.com.au Page 6
Step 1
You will need
2 x Magnet
With Legs
(H2)
Mallet
(H2) (P2)
Fix 2x Magnet With Legs (H2) to Top Panel (P2) as per Detail A.
Step 2
(H12)
(P5)
Fix 4x Rectractable Door Studs (H3) to Door Panel Let (P5) and Door Panel Right (P6) as
per Detail A. Fix 2x Magnet Plates (H12) to Door Panel Let (P5) and Door Panel Right
(P6) with 4x Screws M3.5 × 12 (H13) as per Detail B. Tighten with a phillips head
screwdriver.
You will need
Phillips head
screwdriver
4 x Rectractable
Door Studs
(H3)
2 x Magnet
Plates
(H12)
4 x Screws
M3.5 × 12
(H13)
DETAIL A
DETAIL A
DETAIL A DETAIL B
(H3)
(H13)
DETAIL B
DETAIL A
(P6)
TOP
TOP

fantasticfurniture.com.au Page 7
(P5)
Fix 2x Handles (H4) to Door Panel Let (P5) and Door Panel Right (P6) with 4x Pan Head
Screws #6 × 16.5 (H5) as per Detail A. Tighten with a phillips head screwdriver.
Step 4
(P2)
Attach Top Panel (P2), Bottom Panel (p3) and 2x Shelf Panels (P4) to Side Panel (P1)
with 8x Long Screws (H1). Tighten with a phillips head screwdriver.
You will need
Phillips head
screwdriver
8 x Long Screws
(H1)
DETAIL A
DETAIL A
(H1)
(H5)
(H4)
You will need
Phillips head
screwdriver
2 x Handles
(H4)
4 x Pan Head
Screws
#6 × 16.5
(H5)
Step 3
(P3)
(P1)
(P4)
(P4)
(P6)
TOP
TOP

fantasticfurniture.com.au Page 8
(P7)
Slide 3x Back Panels (P7) into grooves of Top Panel (P2), Bottom Panel (P3) and
2x Shelf Panels (P4).
Step 6
(P2)
Attach Side Panel (P1) to Top Panel (P2), Bottom Panel (P3) and 2x Shelf Panels (P4)
with 8x Long Screws (H1). Tighten with a phillips head screwdriver.
You will need
Phillips head
screwdriver
8 x Long Screws
(H1)
(H1)
Step 5
(P3)
(P1)
(P4)
(P4)
(P7)
(P7)
(P2)
(P3)
(P4)
(P4)

fantasticfurniture.com.au Page 9
Tap 4x Corner Blocks (H14) into corners of Back Panels (P7) with 4x Screws M3 × 20 (H15),
sure they are all the way in. Tighten with a phillips head screwdriver.
Step 8
Insert Door Panel Let (P5) and Door Panel Right (P6) as per Detail A and
Detail B.
Step 7
(P1)
(P5)
DETAIL B
DETAIL A
DETAIL A
DETAIL B
TOP
BOTTOM
You will need
Phillips head
screwdriver
4 x Corner
Blocks
(H14)
4 x Screws
M3 × 20
(H15)
(P7)
(P7)
DETAIL A
DETAIL A
(P7)
(H15)
(H14)
(P6)

fantasticfurniture.com.au Page 10
Place 16x Stickers (H7) to cover screws.
Step 10
(H7)
Step 9
(P1)
(P7)
DETAIL A
DETAIL A
(P7)
DETAIL A
DETAIL A
(H10)
(H11)
(P7)
You will need
16 x Stickers
(H7)
You will need
Phillips head
screwdriver
1 x Webbing
(H9)
1 x Pan Head
Screw
M3.5 × 12
(H10)
1 x Flat Washer
(H11)
Attach the Webbing (H9) to the unit using the Flat Washer (H11) and Pan Head Screw (H10).
We strongly advise that you secure the unit to a wall using the Webbing provided,
to prevent the unit from toppling.
(H9)
30MM
(P2)

fantasticfurniture.com.au Page 11
Step 12
Step 11
DETAIL A
DETAIL A
Move furniture to its final position, then connect the end of the Webbing (H9) to the
wall, ensuring it is firmly attached. Seek advice from a qualified trades person on
how to attach this to your specific wall. Screws and wall plugs are not supplied.
Please use appropriate fixtures for your wall.
To stack multiple units together please use 4x Wood Dowels (H6) as per Detail A
and align unit to connect. For individual units please use 4x Dowel Plugs (H8)
as per Detail B.
You will need
DETAIL A DETAIL B
4 x Wood
Dowels
M6 × 25
(H6)
4 x Dowel
Plugs
(H8)
Mallet
(H6) (H8)
OR
DETAIL B
DETAIL A
(P2)

fantasticfurniture.com.au Page 12
Step 13
In the interest of our environment please dispose
of all packaging thoughfully.
Job complete!