fantastic furniture Serena User manual

Version 1.0
Serena
fantasticfurniture.com.au
Bed Queen

fantasticfurniture.com.au Page 2Page 2
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

fantasticfurniture.com.au Page 4
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver
Base Headboard (P2) ; Base Footboard (P3) ; 2 x Side Rails (P4) ; 2 x Brackets (P5) ;
Headboard (P1)
Parts list
Box 1 :
Box 2 :
Centre Rail (P6) ; 2 x Support Legs (P7) ; 2 x Legs (P8) ; 2 x Footboard Support Block (P9) ;
Hardware pack
(H1)
(H9)
(H2)
(H7)
(H5)
1 x Allen Key
14 x Small Bolts
16 x Washers
(H6)
4 x Large Screws
42 x Small Screws
Box 3 : Slats (P10)
Base Footboard (P3)
Side Rail (P4)
Side Rail (P4)
Support Legs (P7)
Centre Rail (P6)
Bracket (P5)
Headboard (P1)
Slats (P10)
Base Headboard (P2)
Legs (P8) Footboard Support Block (P9)
Hardware Pack
(H3)
2 x Medium Bolts
(H4)
4 x 50mm Large Bolts
4 x Spring Washers
(H8)
4 x 65mm Large Bolts

Step 1
You will need
Attach the Base Headboard (P2) to the Headboard (P1) with 4 x Washers (H7) and 4 x 50mm
fantasticfurniture.com.au Page 5
(H9)
1 x Allen Key
(H3)
4 x 50mm Large Bolts
(H7)
4 x Washers
(P2)
(H7)
(H3)
(H9)
(P1)
(P2)
(P1)
Large Bolts (H3), tightening with the Allen Key (H9) as shown.

(H4)
fantasticfurniture.com.au Page 6
Step 2
You will need
(H9)
(H7)
1 x Allen Key
4 x Washers
(H4)
4 x 65mm Large Bolts 4 x Spring Washers
(H8)
Attach 2 x Footboard Support Blocks (P9) to the Base Footboard (P3) with 4 x 65mm Large
Phillips head
Screwdriver
(not provided)
(P3)
(H9)
(H7)
(H8)
(H6)
4 x Large Screws
(P9)
Large hole Small hole
(P9) (P9)
(H6)
Attention:
as shown.
Secure the Footboard Support Blocks (P9) with 4 x Large Screws (H6) and the Phillips head
screwdriver.
Bolts (H4), 4 x Spring Washers (H8) and 4 x Washers (H7), tightening with the Allen Key (H9)

fantasticfurniture.com.au Page 7
Step 3
Step 4
You will need
(H9)
1 x Allen Key
(H1)
8 x Small Bolts
(P8)
(H1)
(P1)
(P4)
(P4)
(P3)
(P2)
(P2) (P3) (P4)
Attach 2 x Legs (P8) to the bottom of the Footboard Support
Blocks (P9) and rotate clockwise to secure.
Insert 8 x Bolts (H1) into the nuts of the Base Headboard (P2) and Base
Footboard (P3) and tighten two thirds of the way with the Allen Key (H9) as shoewn.
Do not fully tighten the bolts yet.
(P3) (P9)
Attach 2 x Side Rails (P4) to the Base Headboard (P2) and Base Footboard (P3) by slotting
the brackets on the Side Rails (P4) over the bolts as shown,

fantasticfurniture.com.au Page 8
Step 5
You will need
(H9)
(H7)
1 x Allen Key
4 x Washers
(H9)
(H2)
(H7)
(P5)
(H7)
(H1)
(H9)
(P7)
(H2)
2 x Medium Bolts
(H1)
2 x Small Bolts
(P5)
(H7)
(H1)
(H9)
(P6)
Attach 2 x support legs (P7) to the centre rail (P6) as shown using 2 x medium bolts (H2)
Attach 2 x brackets (P5) to the ends of centre rail (P6) as shown using 2 x small bolts (H1)
and 2 x washers (H7), tightening with the Allen Key (H9).
and 2 x washers (H7), tightening with the Allen Key (H9).

Step 6
You will need
(H9)
(H7)
1 x Allen Key
4 x Washers
fantasticfurniture.com.au Page 9
(H1)
4 x Small Bolts
Insert the centre rail (P6) between the Base Headboard (P2) and Base Footboard (P3) as
(H7)
(H1)
(P7)
(P4)
(P3)
(P1)
(P4)
(P2)
Turn the feet on the support legs (P7)
anti-clockwise so they are touching the floor.
(P6)
(H9)
shown. Secure using 4 x small bolts (H1) and 4 x washers (H7), tightening with the Allen
Key (H9).

Step 7
(P2)
(P3)
75.5 75.5
1 x Allen Key
(H9)
42 x Small Screws
(H5)
You will need
Phillips head
Screwdriver
(not provided)
(P1)
(P3)
(P4)
(H9)
(H5)
Ensure the inner space is square and even as shown above.
You may now tighten all bolts on the Base Headboard (P2), Base Footboard (P3) and
Attach the Slats (P10) to the assembled frame using 42 x Small Screws (H5) and the
Ensure the Slats (P10) are centred before screwing them to the bed frame.
Side Rails (P4).
fantasticfurniture.com.au Page 10
(P10)
(P2)
Phillips head Screwdriver as shown.