fantastic furniture Hamilton Bedside 1 Drawer User manual

Version 1.0
Hamilton
Bedside 1 Drawer
fantasticfurniture.com.au

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 30kgs on top.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Page 2

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Back Panel (P4);
Rail (P5);
Rail (P6);
Shelf Panel (P7);
Drawer Front (P8)
Left Drawer Sides (P9);
Right Drawer Sides (P10);
Drawer Base (P11);
Drawer Back (P12);
Hardware pack
Left Drawer
Side (P9)
Right Drawer
Side (P10)
Drawer Back
(P12)
Drawer
Base (P11)
Drawer
Front (P8)
Top Panel
(P1) Right Side
Panel
(P3)
Left Side
Panel
(P2)
Back Panel
(P4)
Rail
(P5) Rail
(P6)
Shelf Panel
(P7)
18 x Cam
Bolts
(H3)
18 x Cam
Nuts
(H4)
2 x Dowels
(H1)
10 x Small
Screws
(H5)
1 x CL Runner
Track
(H6)
1 x CR Runner
Track
(H7)
1 x DR Runner
(H9)
1 x Handle Bolt
(H11)
1 x Handle
(H10)
1 x DL Runner
(H8)
2 x Long
Screws
(H2)
4 x Screws
(H12)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Page 4
fantasticfurniture.com.au
DO NOT USE
1 x Safety
Strap
Screw
(H14)
1 x Safety
Strap
(H13)
2 x Washers
(H15)

6 x Small
Screws (H5)
(P1)
(P5)
(P2)
(P3)
You will need
Step 1
H7
CR
H5
Step 2
You will need
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)
Phillips Head
Screwdriver
Attach 4 x Cam Bolts (H3) to Top Panel (P1), and attach Rail (P5) to Top Panel (P1) with 2 x
Long Screws (H2) by tightening the Phillips Head Screwdriver.
Attach 1 x CL Runner Track (H6) and 1 x CR Runner Track (H7) to Left & Right Side
Panels (P2&P3) with 6 x Small Screws (H5) by tightening with the Phillips Head
Screwdriver.
fantasticfurniture.com.au Page 5
1 x CL Runner
Track (H6)
H6
CL
H5
H3
H5
H5
H6
H7
1 x CR Runner
Track (H7)
H3
H3
H3
H2
H2
2 x Long
Screws (H2)

You will need
Step 3
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Step 4
You will need
Attach 10 x Cam Bolts (H3) to Left & Right Side Panels (P2&P3) by tightening the Phillips
Head Screwdriver.
Insert 1x Dowel (H1) into Left Side Panel (P2). Insert 4 x Cam Nuts (H4) into Rail & Back
Panel & Shelf Panel (P6&P4&P7) as shown. Rotate the cam nuts so the arrows point
towards the incoming cam bolts. Attach Rail & Back Panel & Shelf Panel (P6&P4&P7)
to Left Side Panel (P2) by tightening all cam nuts with the Phillips Head
Phillips Head
Screwdriver
5 x Cam Nuts
(H4)
Phillips Head
Screwdriver
1 x Dowel
(H1)
(P2)
(P4)
(P7)
(P6)
(P2)
(P3)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
10 x Cam Bolts
(H3)
H3
H3
H3
H3
H1 H4
H4
H4
H4
H4
H3
H3
H3
H3
H3
H3

Insert 1x Dowel (H1) into Right Side Panel
(P3). Insert 4 x Cam Nuts (H4) into Rail & Back
Panel & Shelf Panel (P6&P4&P7) as shown. Rotate
the cam nuts so the arrows point towards the incoming cam bolts. Attach Rail & Back
Panel & Shelf Panel (P6&P4&P7) to Right Side Panel (P3) by tightening all cam nuts with
the Phillips Head Screwdriver.
Insert 4 x Cam Nuts (H4) into
Left & Right Side Panel (P2&P3)
as shown. Rotate the cam nuts so
the arrows point towards the incoming
cam bolts. Attach Top Panel (P1) to Left &
Right Side Panel (P2&P3) by tightening all cam
nuts with the Phillips Head Screwdriver.
You will need
Phillips Head
Screwdriver
Step 6
4 x Cam Nuts
(H4)
Step 5
You will need
5 x Cam Nuts
(H4)
Phillips Head
Screwdriver
1 x Dowel
(H1)
(P4)
(P7)
(P1)
(P2)
(P3)
(P6)
(P3)
fantasticfurniture.com.au Page 7
H1
H4
H4
H4
H4
H4
H4
H4
H4

You will need
Step 7
Use 1 x Safety Screw (H14) and 1 x Washer (H15) to connect 1 x Safety Strap (H14) on
Back Panel (P4) by tightening with the Phillips head screwdriver.
Attach 4 x Cam Bolts (H3) to Drawer Front (P8). Tighten with a Phillips Head Screwdriver.
You will need
Step 8
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)
Phillips Head
Screwdriver
1 x Safety
Strap (H13)
1 x Safety Strap
Screw (H14)
1 x Washer
(H15)
(P1)
(P4)
(P8)
(P3)
(P2)
fantasticfurniture.com.au Page 8
H3H3
H3H3
H13
H14
H15
H13
H14
H15

You will need
Step 9
Slide the Drawer Base (P11) into the grooves between drawer sides as shown.
4 x Cam Nuts
(H4)
Attach Drawer Back (P12) to Left & Right
Drawer Side (P9&P10) with 4 x Screws (H12)
by tightening with the Phillips Head Screwdriver.
Ensure the Drawer Base lines up with the grooves the
whole way aroundthe drawer before securing.
(P8)
(P9)
(P9)
(P9)
(P11)
(P12)
(P10)
(P10)
(P10)
fantasticfurniture.com.au Page 9
Phillips Head
Screwdriver
You will need
Step 11
Phillips Head
Screwdriver
Step 10
H4
H4
H12
H12
4 x Screws
(H12)
Insert 4 x Cam Nuts (H4) into Left&Right
Drawer Side (P9&P10) as shown. Rotate
the cam nuts so the arrows point towards
the incoming cam bolts. Attach Drawer Front (P8)
to Left&Right Drawer Side (P9&P10) by
tightening all cam nuts with the Phillips Head Screwdriver.

Attach 1 x Handle (H10) to Drawer Front (P8) with 1 x Handle Bolt (H11) by
tightening with the Phillips Head Screwdriver.
You will need
Step 13
Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P9) and 1 x DR Runner (H9)
to the bottom of Right Drawer Side (P10) with 4 x Small Screws (H5) by tightening with the
Phillips Head Screwdriver.
(P8)
(P9)
(P10)
fantasticfurniture.com.au Page 10
You will need
Step 12
4 x Small
Screws (H5)
Phillips Head
Screwdriver
1 x DR
Runner (H9)
1 x DL
Runner (H8)
1 x Handle
Bolt (H11)
1 x Handle
(H10)
Phillips Head
Screwdriver
H9
H8
H5
H5
H5
H10
H11
H5