fantastic furniture HAYMAN User manual

Assembly Instructions
HAYMAN
Bed Single
VER 1.1

Page 3
What you Need
To Assemble the Body
Bedhead
(P1)
Bedfoot
(P3)
Side Rail
(P2)
8 x Inside
Hexagonal Bolts
(H1)
8 x Half Round Nuts
(H2)
8 x Hexagonal
Nuts
(H4)
(Tools not provided)
Phillips Head Screwdriver
Please make sure you have all these parts before you start.
Side Rail
(P2)
26 x Plastic Connectors 13 x Fantastic Furniture ComfortSlats Single
TM
1 x Allen Key
(H6)
1 x Spanner
(H7)
8 x Hole Stickers
(H3)
Support Rail
(P4)
4 x Small Screws
(Ø4 x 20)
(H5)

Page 4
Step 2
You will need:
(P1)
(P2)
(P2)
(P3)
(P2)
(P2)
Push 4 x Inside Hexagonal Bolts (H1) through Bedhead (P1) and attach with Side Rails (P2) with
4 x Half Round Nuts (H2), and 4 x Hexagonal Nus (H4) using Spanner (H7). Tighten with Allen Key (H6).
Push 4 x Inside Hexagonal Bolts (H1) through Bedfoot (P3) and attach with
Side Rails (P2) with 4 x Half Round Nuts (H2), and 4 x Hexagonal Nuts (H4)
using Spanner (H7). Tighten with Allen Key (H6).
4 x Inside
Hexagonal Bolts
(H1)
4 x Hexagonal
Nuts
(H4)
NOTE: HOLES
POSITIONED
ON TOP
1 x Allen Key
(H6)
H1
H6 H1
H1
H1
Step 1
You will need:
4 x Inside
Hexagonal
Bolts
(H1)
4 x Half Round
Nuts
(H2)
4 x Half Round
Nuts
(H2)
4 x Hexagonal
Nuts
(H4)
1 x Allen Key
(H6)
1 x Spanner
(H7)
H1
H6
H1
H2
H7
H4
H1
H1
1 x Spanner
(H7)
H7
H2 H4

Page 5
(P1)
(P3)
HOW TO FIT YOUR COMFORT SLATS
Step 4
You will need:
26 x Plastic
Connectors
Push plastic connectors firmly onto each Fantastic Furniture ComfortSlats.
Place the slat in position then push down in the centre to flatten.
Make sure the plastic prong lines up with the hole, then push in firmly.
1
2
13 x Fantastic
Furniture
ComfortSlats
Single
TM
TM
Step 3
You will need:
4 x Small
Screws
(H5)
8 x Hole
Stickers
(H3)
(P4)
H5
H5
Attach Support Rail (P4) to Side Rails (P2) as shown. Then screw Support Rail (P4) with
4 x Small Screws (H5).You can leave the holes on the bedhead and bedfoot visible,
or attach 8 x Hole Stickers (H3) to the holes of Bedhead (P1) and Bedfoot (P3).
H5 H5
H5
H3
H3
H5
(P4)
H3
H3
H3
H3
H3
H3

Page 6
The job is now complete!
In the interest of our environment
Please dispose of all packaging thoughtfully.
Repeat the same process for the other end of the slat.
Repeat for every bed slat until finished.
3
4