fantastic furniture Hamilton Coffee Table Rectangle User manual

Version 1.0
Hamilton
Coee Table Rectangle
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love！
Recommended weight capacity : 30kgs on top.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
2 x Side Panels (P2);
Shelf Panel (P3);
4 x Rails (P4);
Hardware pack
Top Panel
(P1)
Shelf Panel
(P3)
Side Panel
(P2)
Side Panel
(P2)
Rail
(P4)
Rail
(P4)
Rail
(P4)
Rail
(P4)
8 x Nuts
(H3)
12 x Long
Screws
(H4)
4 x Dowels
(H1)
8 x Bolts
(H2)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Page 4
fantasticfurniture.com.au
DO NOT USE
4 x Cam
Bolts
(H5)
4 x Cam
Nuts
(H6)

(P4)
(P4)
(P4)
(P4)
(P4)
(P4)
(P4)
(P2)
(P3)
(P3)
You will need
Step 1
Step 2
You will need
Phillips Head
Screwdriver
Phillips Head
Screwdriver
Attach Rails (P4x2) to Bottom Panel (P3) with 6 x Screws (H4) by tightening with the Phillips
Head Screwdriver.
Insert 2 x Dowels (H1) into Bottom Panel (P3). Push 4 x Bolts (H2) through Side
Panel (P2) and insert 4 x Nuts (H3) into Rails (P4x4). Rotate the nuts so the opening
point towards the incoming bolts. Attach Rails (P4x4) to Side Panel (P2) by tightening
all nuts with the Phillips Head Screwdriver.
fantasticfurniture.com.au Page 5
H4
H4
H3
H3
H3
H3
H3
H3
H2
H2
H2
H2
H2
H4
H4
H4
H4
H4
6 x Long
Screws (H4)
Ĝ
h
countersink hole
on outside
4 x Nuts
(H3)
4 x Bolts
(H2)
2 x Dowels
(H1)
H1
H1
Countersink
face upwards
Countersink
face bottom

You will need
Step 3
Step 4
You will need
Insert 2 x Dowels (H1) into Bottom Panel (P3). Push 4 x Bolts (H2) through Side Panel (P2) and
insert 4 x Nuts (H3) into Rails (P4x4). Rotate the nuts so the opening point towards the incoming
bolts. Attach Rails (P4x4) to Side Panel (P2) by tightening all nuts with the Phillips Head
Screwdriver.
Attach 4 x Cam Bolts (H5) to Top Panel (P1) by tightening with the Phillips Head
Screwdriver.
Phillips Head
Screwdriver
Phillips Head
Screwdriver
2 x Dowels
(H1)
(P4)
(P4)
(P3)
(P1)
(P2)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
H3
H3
H3
H3
H2
H2
H2
H2
4 x Nuts
(H3)
4 x Bolts
(H2)
H1
H1
4 x Cam Bolts
(H5)
H5
H5
H5
H5

Step 5
You will need
Insert 4 x Cam Nuts (H6) into Side Panels (P2x2) as shown. Rotate the cam nuts so the arrow
points towards the incoming cam bolts. Attach Rails (P4x2) and Side Panels (P2x2) to Top
Panel (P1) with 6 x Long Screws (H4) by tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
fantasticfurniture.com.au
fantasticfurniture.com.au Page 7
(P4)
(P4)
(P1)
H4
H4
H4
H6
6 x Long
Screws (H4)
4 x Cam Nuts
(H6)