fantastic furniture Java Table D6 User manual

Version 1.0
Java
Table D6
fantasticfurniture.com.au
Required
Two People

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
Page 2
Love it? Share it!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Fantastic buy! Share how it looks at home on Instagram
for your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Glass should always be handled with care.
Scratches, chips, sudden changes in temperature and hairline fractures may
cause glass to break. This glass is designed to break into small, relatively
harmless pieces and not sharp fragments.
Avoid placing hot or cold items directly onto the table unless using a thick
insulation material such as placemats or coasters.
Avoid dropping objects onto the glass. Do not allow hard or pointed objects to
come into contact with the glass. Never use the top area as a chopping
surface. Do not sit or stand on the glass surface.
Rattan
Rattan is a natural material that will respond to humidity in the
environment. Low humidity may cause the rattan to shrink.
High humidity may cause the rattan to absorb moisture and expand,
causing the weaving to look loose and wavy.
This is a natural phenomenon and not a defect.

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

Parts list
1 x Top Panel (P1)
4 x Legs (P2)
1 x Glass Top (P3)
Top Panel
(P1)
What you need
to assemble the product
fantasticfurniture.com.au
Page 4
Glass top
(P3)
Leg (P2)
Hardware pack
8 x Bolts
(H2)
8 x Flat Washers
(H3)
4 x Felt
Feet (H1)
8 x Spring
Washers (H4)
1 x Allen Key
(H5)
Leg (P2)
Leg (P2)
Leg (P2)

Step 1
Page 5fantasticfurniture.com.au
You will need
Attach 1 x felt foot (H1) onto each leg (P2) as shown.
Step 2
You will need
8 x Bolts
(H2)
Attach 1 x leg (P2) onto top panel (P1), using 2 x bolts (H2), 2 x spring washers (H4)
and 2 x flat washers (H3). Tighten the bolts with allen key (H5).
Repeat this step for the other 3 x legs (P2).
With assistance, carefully turn the table over.
4 x Felt Feet
(H1)
X4
8 x Flat
Washers (H3)
8 x Spring
Washers (H4)
1 x Allen Key
(H5)
H5
H2
H4 H3
(P1)
(P2)
H1
Required
Two People
(P2)
(P2)
(P2)
(P2)
(P2)
(P1)

Step 3
Page 6
fantasticfurniture.com.au
Position glass top (P3) onto rattan frame as shown.
Step 4
(P1)
(P3)
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.

Version 1.0

.
Fantastic
Furniture