fantastic furniture Pod Storage Box User manual

Version 1.0
Pod
Storage Box
fantasticfurniture.com.au

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Recommended weight capacity : 50kgs on top.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Page 2
CAUTION: Keep hands away from
the hinge/closing mechanism to avoid the risk of
finger entrapment injury.

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Top Panel (P2);
Left Side Panel (P3);
Right Side Panel (P4);
Bottom Panel (P5);
Back Panel (P6);
Front Panel (P7);
4 x Legs (P8)
Hardware pack
Top Panel
(P1)
Bottom
Panel
(P5)
Top Panel
(P2)
Right Side
Panel
(P4)
Back
Panel
(P6)
Front
Panel
(P7)
Leg
(P8)
Left Side
Panel
(P3)
x4
12 x Cam
Bolts
(H3)
12 x Cam
Nuts
(H4)
18 x Dowels
(H1)
16 x Small
Screws
(H5)
2 x Hinges
(H7)
1 x Mechanism
(H6)
10 x Long
Screws
(H2)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 4
fantasticfurniture.com.au
DO NOT USE
4 x Leg
Plates
(H8)
16 x Bolts
(H10)
1 x Allen Key
(H12)
4 x Plastic
Glides
(H11)
8 x Long
Bolts
(H9)

You will need
Step 1
Step 2
You will need
Phillips Head
Screwdriver
8 x Cam Bolts
(H3)
Attach 8 x Cam Bolts (H3) to Front Panel (P7) and Back Panel (P6) by tightening with the
Phillips Head Screwdriver.
Insert 8 x Cam Nuts (H4) and 8 x Dowels (H1) into Left & Right Side Panels (P3 & P4) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Front Panel
(P7) and Back Panel (P6) to Left & Right Side Panels (P3 & P4) by tightening all cam
nuts with the Phillips Head Screwdriver.
fantasticfurniture.com.au Page 5
Phillips Head
Screwdriver
H3
H3
H3
H3
(P6)
(P6)
(P3)
(P4)
(P7)
(P7)
H3
H3
H3
H3
H4
H4
8 x Cam
Nuts (H4)
8 x Dowels
(H1)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
H4
H4
H4
H4
H1
H1
H1
H1
H1
H1
H1

You will need
Step 3
Step 4
You will need
Insert 8 x Dowels (H1) into Front
Panel (P7), Back Panel (P6) and
Left & Right Side Panels (P3 & P4).
Attach Bottom Panel (P5) to Front
Panel (P7), Back Panel (P6) and Left &
Right Side Panels (P3 & P4) with 10 x
Long Screws (H2) by tightening with the Phillips Head Screwdriver.
Secure 4 x Leg Plates (H8) to 4 x
Legs (P8) with 8 x Long Bolts (H9) by tightening with an Allen Key (H12). Attach 4 x
Legs (P8) to Bottom Panel (P5) with 16 x Bolts (H10) by tightening with an Allen Key
(H12). Hammer 4 x Plastic Glides (H11) onto the bottom of Legs (P8).
Phillips Head
Screwdriver
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
Phillips Head
Screwdriver
Ensure the countersunk
holes on the Leg Plate are
facing up, so that the Screws
sit flush with the top of
the Leg Plate once attached.
(P8)
(P8)
(P8)
(P6)
(P5)
(P3)
(P4)
(P7)
(P8)
(P8)
(P5)
H8
H9
H11
H2
H2
H2
H1
H2
H2
H2
H2
H2
H2
H2
H1
H1
H1
16 x Bolts
(H10)
4 x Plastic
Glides (H11)
1 x Allen Key
(H12)
8 x Dowels
(H1)
10 x Long
Screws (H2)
H11
H11
H11
H11
H12
H10
H10
H10
H10
H10
H10 H12
4 x Leg
Plates (H8)
Hammer
8 x Long Bolts
(H9)

Insert 4 x Cam Nuts (H4)
and 2 x Dowels (H1) into
Back Panel (P6) and Left & Right
Side Panels (P3 & P4) as shown.
Rotate the cam nuts so the arrows
point towards the incoming cam bolts.
Attach Top Panel (P2) to Back Panel (P6)
and Left & Right Side Panels (P3 & P4) by tightening all cam nuts with
the Phillips Head Screwdriver.
You will need
Step 5
Phillips Head
Screwdriver
Step 6
You will need
4 x Cam Nuts
(H4)
Phillips Head
Screwdriver
2 x Dowels
(H1)
Attach 4 x Cam Bolts (H3) to Top Panel (P2) by tightening with the Phillips Head Screwdriver.
Attach 2 x Hinges (H7) to Top Panel (P2) with 6 x Small Screws (H5) by tightening with the Phillips
Head Screwdriver.
fantasticfurniture.com.au Page 7
(P6)
(P2)
(P2)
(P3)
(P4)
H5
H7
H4
H4
4 x Cam Bolts
(H3)
6 x Small
Screws (H5)
2 x Hinges
(H7)
H1
H1
H3
H3
H3
H3
H5
H7
H5
H7

Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
You will need
Step 7
Phillips Head
Screwdriver
Attach Top Panel (P1) to Top
Panel (P2) with 6 x Small Screws (H5) by
tightening with the Phillips Head Screwdriver.
Attach 1 x Mechanism (H6) to Left Side Panel (P3)
and Top Panel (P1) with 4 x Small Screws (H5) by
tightening with the Phillips Head Screwdriver.
(P1)
1 x Mechanism
(H6)
fantasticfurniture.com.au Page 8
(P2)
(P3)
(P4)
H5 H6
H7
H7
H5
H5
H5
H7
10 x Small
Screws (H5)
H5
H6
H5
H5
H5