fantastic furniture ESPEN Chair User manual

Version 1.0
www.fantasticfurniture.com.au
Chair
ESPEN

www.fantasticfurniture.com.au PAGE 2www.fantasticfurniture.com.au PAGE 2
Enjoy
Your purchase from
Australia’s Best Value Furniture Store
CAUTION:
Use this product for seating one person at a time.
Do not stand on, or use this chair as a step ladder.
Do not rock on chair as this may result in injury.
This product should be checked periodically to ensure
alle components are secure and all hardware is tight.
RECOMMENDED WEIGHT CAPACITY 120 KG

www.fantasticfurniture.com.au PAGE 3
Assembly checklist
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
Useful Information
!
hardware if used incorrectly
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
!
components please visit our website Help Centre for further assistance.

www.fantasticfurniture.com.au PAGE 4
What you need
to assemble the product
Parts list
Box 1: Base (P1); Seat/back (P2).
Base
1 x (P1)
Bolt
4 x (H1)
Flat Washer
4 x (H2)
Allen Key
1 x (H3)
Seat/back
1 x (P2)

www.fantasticfurniture.com.au PAGE 5
Step 1
You will need
Attach seat/back (P2) to base (P1)
using washers (H2), bolts (H1)
and allen key (H3), align the bolts to the nuts
on bottom seat first, make sure the sides of
the seat and frame are well aligned
before fully tightning all the bolts.
P1
4 x (H1) 4 x (H2)
1 x (H3)
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully .
P2
H2
H1
H3
make sure the seat is well
aligned on both sides