fantastic furniture Replica Cesca User manual

Version 1.0
fantasticfurniture.com.au
Chair 1 Seater
Replica Cesca

Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au
Rattan
Rattan is a natural material that will respond to humidity in the
environment. Low humidity may cause the rattan to shrink.
High humidity may cause the rattan to absorb moisture and expand,
causing the weaving to look loose and wavy.
This is a natural phenomenon and not a defect.
Caution:
Do not stand on, or use this chair as a step ladder.
Use this product for seating one person at a time.
This product should be checked periodically to ensure
all components are secure and all hardware is tight.
Recommended weight capacity: 120kg
fantasticfurniture.com.au Page 2Page 2

fantasticfurniture.com.au
Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3

fantasticfurniture.com.au
What you need
to assemble the product
Hardware pack
Backrest
(P3)
Seat
(P2)
Leg Frame
(P1)
Parts list
Leg Frame (P1);
Seat (P2);
Backrest (P3)
4 x Bolts
M6 x 40
(H1)
4 x Bolts
M6 x 35
(H2)
1 x Allen key
(H3)
Page 4

Step 1
Step 2
Place Seat (P2) on a soft and clean surface up side down.
Put Leg Frame (P1) onto Seat (P2) with the holes aligned as shown.
Insert 4 x Bolts (H1) into Leg Frame (P1) and tighten the Bolts (H1) with Allen key (H3).
Turn the chair over.
Put Backrest (P3) onto Leg Frame (P1) with the holes aligned as shown.
Insert 4 x Bolts (H2) into Leg Frame (P1) and tighten the Bolts (H2) with
Allen key (H3).
H1
H3
H1
H1
H1
You will need
Allen key
(H3)
4 x Bolts
M4 x 40
(H1)
(P1)
fantasticfurniture.com.au
(P2)
H2
H2
H2
H2
H3
(P1)
(P2)
(P3)
Top
Bottom
Please note the position
of the bolt holes
Page 5
You will need
Allen key
(H3)
4 x Bolts
M6 x 35
(H2)

Step 3
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
fantasticfurniture.com.au Page 6