fantastic furniture HAYMAN Storage Mirror White User manual

Version 1.1
Hayman
fantasticfurniture.com.au
Storage Mirror White

Secure it!
Wall attachment guide
(with available wood stud)
Screw directly into
stud.
Please seek professional advice if you are in doubt of what fixing device to use.
•
•
• Do not
•
•
Reduce the risk of furniture
tip-over accidents
(with available wood stud)
S
.
Screw
fantasticfurniture.com.aufantasticfurniture.com.au
Recommended Weight Capacity :10kg

fantasticfurniture.com.au Page 3
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 4
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Hardware Pack
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Flat head screwdriver;
DO NOT USE
Page 5
fantasticfurniture.com.au
Cabinet
(P1)
Frame
(P2)
Support
Rail
(P3)
Support
Rail
(P4)
Frame
(P2)
Support Leg
(P5)
Support Leg
(P5)
Door
(P6)
Parts list
Cabinet (P1);
2 x Frame (P2) ;
Support Rail(P3);
Support Rail (P4);
2 x Support Legs (P5);
Door (P6)
6 x Barrels
(H3)
2 x Ring Bolts
(H2)
6 x Bolts
(H1)
2 x Dowels
(H4)
4 x Felt Pads
(H5)
2 x Plastic Washers
(H10)
4 x Hinge
(H11)
16 x Hinge Screw
(H12)
2 x Plastic Plugs
(H9)
1 x Screw
(H7)
1 x Safety
Strap
(H6)
2 x Washers
(H8)

You will need
Step 1
You will need
Step 2
Page 6
fantasticfurniture.com.au
(P3)
(P2)
(P4)
H1
H1
H1
H3
H4
(P5)
H3
H3
H4
Phillips head
screwdriver
1 x Dowel
(H4)
Flat head
screwdriver
3 x Barrels
(H3)
3 x Bolts
(H1)
Insert 1 x Dowel (H4) & 1 x Barrel (H3) into Support Rail
(P3) and 2 x Barrels (H3) into Support Rail (P4). Ensure the Barrels (H3) are rotated horizontally
with the Flat Head Screwdriver ready for the incoming Bolts. Use 3 x Bolts (H1) to attach Support
Leg (P5) and Support Rails (P3&P4) to Frame (P2) as shown by tightening the Bolts with the
Phillips Head Screwdriver.
H1
H1
H1
(P3)
(P4)
(P2)
H4
(P2)
H3
H3
H4
H3
Insert 1 x Dowel (H4) & 1 x Barrel (H3) into Support Rail (P3) and 2 x Barrels (H3) into Support
Rail (P4). Ensure the Barrels (H3) are rotated horizontally with the Flat Head Screwdriver ready
for the incoming Bolts. Use 3 x Bolts (H1) to attach Support Leg (P5) and Support Rails (P3&P4)
to Frame (P2) as shown by tightening the Bolts with the Phillips Head Screwdriver.
Phillips head
screwdriver
Flat head
screwdriver
1 x Dowel
(H4)
3 x Barrels
(H3)
3 x Bolts
(H1)

You will need
Step 3
Page 7
fantasticfurniture.com.au
You will need
Step 4
(P5)
(P5)
H5
H5
H5
H5
4 x Felt Pads
(H5)
Apply 4 x Felt pads (H5) to bottom of Legs (P5) as shown.
Phillips head
screwdriver
4 x Hinges
(H11)
8 x Hinge
Screws (H12)
Attach 4 x Hinges (H11) to Door panel (P6) and secure by tightening 8 x Hinge
Screws (H12) with the Phillips Head Screwdriver.
H12
H12
H12
H12
H12
H11
H11
H11
H11
(P6)
H11

You will need
Step 6
You will need
Step 5
Page 8
fantasticfurniture.com.au
H12
(P1)
(P6)
Top
Bottom
H12
H12
H12
H12 H11
H11
H11
H11
H11
Phillips head
screwdriver
8 x Hinge
Screws (H12)
Secure Door panel (P6) to Cabinet (P1) by attaching reverse of 4 x Hinges (H11)
with 8 x Hinge Screws (H12) by tightening with Phillips Head Screwdriver.
(P2)
(P2)
(P1)
Ensure the holes on
Support Rails (P3&P4)
are facing towards the
back of the Cabinet
before securing.
H2
H10
2 x Ring Bolts
(H2)
2 x Plastic
Washers (H10)
Thread the Ring Bolts (H2x2) and Plastic Washers (H10x2) through each side of the Frame
(P2) and secure to the Cabinet (P1) by winding the Ring Bolts (H2x2) to tighten.

Step 8
You will need
You will need
Step 7
Page 9
fantasticfurniture.com.au
H6
H7
H8
(P2)
(P1)
(P2)
H9
H9
H6
H7
H8
2 x Plastic
Plugs (H9)
Phillips head
screwdriver
1 x Safety
Strap (H6)
1 x Screw
(H7)
1 x Washer
(H8)
Insert 2 x Plastic Plugs (H9x2) into each side
of the Frame (P2) and then gently rest the
Cabinet (P1) against the Plastic Plugs (H9x2).
To connect 1 x Safety Strap (H6) to the top
of the Cabinet (P1) use 1 x Washer (H8) and Screw (H7) by tightening with the Phillips Head
Screwdriver. We strongly suggest you use the wall strap provided to prevent the unit from toppling.
Phillips head
screwdriver
1 x Washer
(H8)
Move the unit into it’s final position and then secure
the Safety Strap to the wall. Ensure it is firmly
attached. Screw and wall plug are not provided.
Please use appropriate fixtures for your wall.
* Seek advice from a qualified tradesperson on how to attach this safety strap to your specific wall.
H8
Screw
Wall
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
Screw and Wall Plug are not
provided. Please use
appropriate fixtures for
your wall.