fantastic furniture Havana Dresser 7 Drawer User manual

Version 1.0
Havana
Dresser 7 Drawer
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 18kgs /Drawer.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

32 x Cam
Bolts
(H3)
32 x Cam
Nuts
(H4)
70 x Small
Screws
(H5)
28 x Small
Cam Nuts
(H11)
7 x CL Runner
Tracks
(H6)
6 x Plastic
Glides
(H2)
14 x Round
Head Bolts
(H14)
7 x CR Runner
Tracks
(H7)
7 x Handles
(H13)
7 x DR
Runners
(H9)
7 x DL
Runners
(H8)
36 x Long
Screws
(H12)
30 x Dowels
(H1)
4 x Wedges
(H15)
4 x Screws
(H16)
Parts list
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3); 2 x Dividers
(P4);
2 x Rails (P5); Divider (P6);
LF Leg (P7); RF Leg (P8);
LR Leg (P9); RR Leg (P10);
Rail (P11); Rail (P12);
Back Panel (P13);
Smaller Drawer Front (P14);
Smaller Drawer Front (P15);
Smaller Drawer Front (P16);
7 x Left Drawer Side (P17);
7 x Right Drawer Side (P18);
3 x Smaller Drawer Base (P19);
3 x Smaller Drawer Back (P20);
2 x Larger Drawer Front (P21);
2 x Larger Drawer Front (P22);
4 x Larger Drawer Base (P23);
4 x Larger Drawer Back (P24);
Top Panel
(P1) Right Side
Panel
(P3)
Left Side
Panel
(P2)
Back
Panel
(P13)
LR
Leg
(P9)
RR
Leg
(P10)
RF Leg
(P8)
LF Leg
(P7)
Hardware pack
2 x Wooden
Screws M4 x 40mm
(H17)
Divider
(P4)
Divider
(P4)
Divider
(P6)
Rail
(P5)
Rail
(P5)
Rail
(P11)
Rail
(P12)
Left
Drawer Side
(P17)
Right
Drawer Side
(P18)
Smaller
Drawer Back
(P20)
Smaller
Drawer Base
(P19)
Smaller
Drawer Front
(P14, P15, P16)
×3 ×4
Left
Drawer Side
(P17)
Right
Drawer Side
(P18)
Larger
Drawer Back
(P24)
Larger
Drawer Front
(P21, P22 )
Larger
Drawer Base
(P23)
28 x Small
Cam Bolts
(H10)
1 x Screw
(H20)
1 x Safety
Strap
(H19)
2 x Washers
(H18)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
DO NOT USE
Page 4
fantasticfurniture.com.au

H4
(P2)
(P7)
(P9)
(P3)
(P10)
(P8)
H1
H4
H4
H1
H1
H1
H4
H4
H1
H4
H4
H4
H4
H4
Attach 12 x Cam Bolts (H3) into Legs (P7, P8, P9, P10).
You will need
Step 1
You will need
Step 2
12 x Cam Bolts
(H3)
Phillips Head
Screwdriver
Phillips Head
Screwdriver
Phillips head
screwdriver
6 x Cam Nuts
(H4)
You will need
Step 3
Insert 4 x Dowels (H1) into the holes of Left Side Panel (P2).
Insert 6 x Cam Nuts (H4) into the holes of Left Side Panel (P2).
Rotate the cam nuts so the arrows point towards the incoming
cam bolts. Attach Legs (P7, P9) to Left Side Panel (P2), then
tighten the cam nuts.
Insert 4 x Dowels (H1) into the holes of Right Side Panel (P3).
Insert 6 x Cam Nuts (H4) into the holes of Right Side Panel (P3).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Legs (P8, P10) to Right Side Panel (P3), then tighten the cam nuts.
(P7) (P9)
(P10)
(P8)
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
4 x Dowels
(H1)
6 x Cam Nuts
(H4)
4 x Dowels
(H1)
H1
H1
H1
Page 5
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.

You will need
Step 4
3 x CL Runner
Tracks (H6)
18 x Small
Screws (H5)
Phillips Head
Screwdriver
3 x CR Runner
Tracks (H7)
Step 5
You will need
8 x Cam Bolts
(H3)
Phillips Head
Screwdriver
Attach 3 x CL Runner Tracks (H6) to Left Side Panel (P2) with 9 x Small Screws (H5).
Attach 3 x CR Runner Tracks (H7) to Right Side Panel (P3) with 9 x Small Screws (H5).
Attach 8 x Cam Bolts (H3) into Side Panels (P2, P3) and Legs (P7, P8, P9, P10).
H5
H5
H5 H5
H5
H5 H5
H5
H5
H5
H5
H5
H5
H5 H5
H5
H5 H5
H6
CL
H5
H7
CR
H5
H3
H3
H3
H3
H3
H3
H3
H3
(P2)
(P2)
(P3)
(P3)
H6
H7
H6
H6
H7
H7
(P7)
(P9) (P10)
(P8)
Page 6
fantasticfurniture.com.au

You will need
Step 6
You will need
Step 7
Attach 1 x CL Runner Track (H6) to Divider (P4) with 3 x Small Screws (H5).
Turn Divider (P4) over to the other side, then attach 1 x CR Runner Track (H7)
with 3 x Small Screws (H5). Repeat Step 6 for the other Divider (P4).
2 x CL Runner
Tracks (H6)
12 x Small
Screws (H5)
Phillips Head
Screwdriver
2 x CR Runner
Tracks (H7)
H7
CR
H5
H6
CL
H5
Attach 2 x CL Runner Tracks (H6) to Divider (P6) with 6 x Small Screws (H5).
Turn Divider (P6) over to the other side, then attach 2 x CR Runner Tracks (H7)
with 6 x Small Screws (H5).
H5
H5
H5
H5
2 x CL Runner
Tracks (H6)
12 x Small
Screws (H5)
Phillips Head
Screwdriver
2 x CR Runner
Tracks (H7)
H7
CR
H5
H6
CL
H5
Attach Rails (P5) to Dividers (P4) with 8 x Long Screws (H12).
Insert 2 x Cam Bolts (H3) into the holes of Rails (P5).
You will need
Step 8
Phillips Head
Screwdriver
8 x Long
Screws(H12)
H12
H12
H12
H12
2 x Cam Bolts
(H3)
FLIP
FLIP
H5
H5
H5
PVC edge
(P4)
H6 H5
H5
H5
(P4)
H7
H6
H6
(P6)
(P4)
(P4)
(P5)
(P5)
H3
H3
Raw edge
H5
H5
H5
H5
H5
H5
H7
H7
(P6)
PVC edge Raw edge
Page 7
fantasticfurniture.com.au

Phillips Head
Screwdriver
Phillips Head
Screwdriver
Insert 2 x Dowels (H1) into the holes of Rails (P5).
Insert 2 x Cam Nuts (H4) into the holes of Divider (P6).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Rails (P5) into place and tighten the cam nuts.
You will need
Step 10
H4
H1
2 x Cam Nuts
(H4)
(P6)
(P5)
(P5)
You will need
Step 9
Attach Rails (P11, P12) to Divider (P6) with 2 x Wooden Screws (H17)
using a Phillips head screwdriver.
H17
H17
(P12)
(P6)
(P11)
2 x Dowels
(H1)
2 x Wooden
Screws M4
x 40mm (H17)
Page 8
fantasticfurniture.com.au
Required
Two People
Required
Two People

Phillips Head
Screwdriver
Phillips Head
Screwdriver
Insert 4 x Dowels (H1) into Rails (P5, P11, P12).
Insert 4 x Cam Nuts (H4) into the holes of Rails
(P5, P11, P12 ). Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Right Side Panel (P2) with Rails (P5, P11, P12) securely and tighten the cam nuts.
Attach 6 x Plastic Glides (H2) on Legs (P7, P8, P9, P10) and Divider (P6) with a
Hammer.
Insert 4 x Dowels (H1) into Rails (P5, P11, P12).
Insert 4 x Cam Nuts (H4) into the holes of Rails (P5, P11, P12).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Left Side Panel (P2) with Rails (P5, P11, P12) securely, and tighten the cam nuts.
You will need
Step 12
You will need
Step 11
4 x Cam Nuts
(H4)
H4
H4
H4
H4
Hammer
H2
H2
H2
H2
H2
H2
H1
H1
H1
H1
H1
H4
H4
H4
H4
(P12)
(P11)
(P5)
(P5)
(P7)
(P9)
(P2)
(P6)
(P8)
(P12)
(P6)
(P5)
(P5)
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
6 x Plastic
Glides (H2)
Hammer
4 x Dowels
(H1) (P7)
(P9)
(P2)
Page 9
fantasticfurniture.com.au

You will need
Step 14
Step 13
Attach 10 x Cam Bolts (H3) into Top Panel (P1) as shown.
10 x Cam Bolts
(H3)
Phillips Head
Screwdriver
Carefully turn the cabinet over to an upright position.
Slide Back Panels (P13) in through the grooves of Legs (P9, P10) and Rail (P12).
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
(P13)
(P9)
(P10)
(P12)
(P1)
Page 10
fantasticfurniture.com.au
Required
Two People

10 x Cam Nuts
(H4)
You will need
Step 16
Insert 10 x Cam Nuts (H4) into the holes of
Side Panels (P2, P3), Dividers (P4) and Legs (P7, P8, P9, P10).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P1) to the frame and then tighten the cam nuts
using a Phillips head screwdriver.
Phillips Head
Screwdriver
You will need
Step 15
12 x Dowels
(H1)
Insert 12 x Dowels (H1) into Side Panels (P2, P3), Dividers (P4) and Legs (P7, P8, P9, P10)
as shown.
H1
(P8)
(P9)
(P7)
H1
H1
H1
H1
H1
H4
H4
H4
(P1)
(P8)
(P9)
H4
H4
H4
H4
H4
H4
H1
H1
H1
(P4)
(P4)
(P2)
(P4)
(P4)
Page 11
fantasticfurniture.com.au
Required
Two People

Insert 4 x Small Cam Nuts (H11) into the holes of Drawer Sides (P17, P18).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Drawer Sides (P17, P18) with Smaller Drawer Front (P14),
and then tighten the cam nuts.
You will need
4 x Small Cam
Nuts (H11)
Step 19
Screw 4 x Small Cam Bolts (H10) into Smaller Drawer Front (P14) with a Phillips head screwdriver.
Phillips Head
Screwdriver
Phillips Head
Screwdriver
4 x Small Cam
Bolts (H10)
You will need
Step 18
(P17)
(P18)
H11
H11
H11
H11
(P14)
(P14)
H10 H10
H10 H10
Secure Back Panel (P13) in place with 4 x Wedges (H15) using 4 x Screws (H16).
Phillips Head
Screwdriver
You will need
Step 17
4 x Wedges
(H15)
4 x Screws
(H16)
H15
H16
(P13)
Page 12
fantasticfurniture.com.au

4 x Small
Screws (H5)
You will need
1 x DL Runner
(H8)
1 x DR Runner
(H9)
H9
H5
DR
H5
H8 DL
H5 H5
Step 22
Phillips Head
Screwdriver
Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P17) and
1 x DR Runner (H9) to the bottom of Right Drawer Side (P18) with 4 x Small Screws (H5).
Tighten Screws using a Phillips head screwdriver.
Attach Smaller Drawer Back (P20) to Drawer Sides (P17, P19) with 4 x Long Screws (H12),
make sure that the grooves line up the whole way around the drawer.
Tighten Screws using a Phillips head screwdriver.
Phillips Head
Screwdriver
You will need
4 x Long
Screws(H12)
Step 21
Slide Smaller Drawer Base (P19)
in through the grooves of Drawer Sides (P17, P18).
Step 20 (P19)
(P17)
(P18)
(P17)
(P17)
(P18)
(P18)
(P20)
H12
H12
H12
H12
H9
H8
H5
H5
H5
H5
Page 13
fantasticfurniture.com.au

Phillips Head
Screwdriver
4 x Small Cam
Bolts (H10)
You will need
Step 25
(P21)
H10 H10
H10 H10
(P14)
H13
H14
H14
Attach 1 x Handle (H13) to Smaller Drawer Front (P14) with 2 x Round Head Bolts (H14).
Tighten Round Head Bolts using a Phillips head screwdriver.
You will need
1 x Handle
(H13)
2 x Round Head
Bolts (H14)
Phillips Head
Screwdriver
Step 23
Step 24
(P15, P16)
Repeat Step 18 to Step 23 with Samller Drawer Fronts (P15, P16)
to assemble the other 2 smaller drawers.
Insert 4 x Small Cam Bolts (H10) into Larger Drawer Front (P21).
Page 14
fantasticfurniture.com.au

Slide Larger Drawer Base (P23) in through the grooves
of Drawer Sides (P17, P18).
Insert 4 x Small Cam Nuts (H11) into the holes of Drawer Sides (P17, P18).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Drawer Sides (P17, P18) with Larger Drawer Front (P21), and then tighten the cam nuts.
You will need
4 x Small Cam
Nuts (H11)
Step 26
Attach Larger Drawer Back (P24) to Drawer Sides (P17, P18) with 4 x Long Screws (H12),
make sure that the grooves line up the whole way around the drawer.
Tighten Screws using a Phillips head screwdriver.
Phillips Head
Screwdriver
You will need
4 x Long
Screws(H12)
Step 28
Step 27
(P17)
(P18)
H11
H11
H11
H11
(P23)
(P17)
(P18)
(P17)
(P18)
(P24)
H12
H12
H12
H12
(P21)
Phillips Head
Screwdriver
Page 15
fantasticfurniture.com.au

4 x Small
Screws (H5)
You will need
1 x DL Runner
(H8)
1 x DR Runner
(H9)
H9
H5
DR
H5
H8 DL
H5 H5
Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P17) and
1 x DR Runner (H9) to the bottom of Right Drawer Side (P18) with 4 x Small Screws (H5).
Tighten Screws using a Phillips head screwdriver.
Attach 1 x Handle (H13) to Larger Drawer Front (P21) with 2 x Round Head Bolts (H14).
Tighten Round Head Bolts using a Phillips head screwdriver.
Step 29
Phillips Head
Screwdriver
You will need
1 x Handle
(H13)
2 x Round Head
Bolts (H14)
Phillips Head
Screwdriver
Step 30
Step 31
(P21)
H13
H14
H14
(P21, P22)
(P17)
(P18)
Repeat Step 25 to Step 30
with Larger Drawer Fronts (P21, P22) to assemble the other 3 larger drawers.
H9
H8
H5
H5
H5
H5
Page 16
fantasticfurniture.com.au

Slide 7 x drawers into the Dresser as shown.
Step 32
(P14) (P15) (P16)
(P21)
(P21)
(P1)
(P22)
(P22)
Phillips Head
Screwdriver
1 x Safety
Strap (H19)
1 x Screw
(H20)
You will need
Step 33
1 x Washer
(H18)
H19
H20
H18
20mm
Use Screw (H20) and Washer (H18)
to attach Safety Strap (H19) securely on Top Panel (P1) as shown.
We strongly advise that you use
the wall safety strap provided to
prevent the unit toppling
Page 17
fantasticfurniture.com.au

Step 34
Move the dresser to the final position, and attach the safety strap to the wall securely.
Make sure it is firmly attached and snug fit.
Phillips Head
Screwdriver
You will need
1 x Washer
(H18)
wall
Screw
H18
H18
Page 18
fantasticfurniture.com.au
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
Screw and Wall Plug
are not provided.
Please use appropriate
fixtures for your wall.
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.