fantastic furniture STOCKHOLM LOWLINE MEDIUM 1600MM User manual

Version 1.0
STOCKHOLM
LOWLINE MEDIUM 1600MM
fantasticfurniture.com.au

fantasticfurniture.com.au PAGE 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home for your
chance to win a $250 Fantastic Furniture Gift Card!
fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable
surface. Connecting attachments for your wall are not included
since dierent surface materials require dierent attachments.
Please seek professional advice if you are in doubt of what wall
connections to use.
Recommended weight capacity : 10kgs/shelf.

PAGE 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

4 x Legs
(P15)
2 x Support
Legs (P16)
Top Panel
(P1)
Left
Side
Panel
(P2)
Right
Side
Panel
(P3)
Bottom Panel
(P4)
Shelf Panel
(P5)
Shelf Panel
(P6)
Shelf
Panel
(P7)
Shelf
Panel
(P8)
Back
Panel
(P9)
Back
Panel
(P9)
Back
Panel
(P10)
Rail
(P11)
Shelf
Panel
(P12)
Door
(P13)
Door
(P14)
Shelf Panel
(P5)
Parts list
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Bottom Panel (P4);
2 x Shelf Panels (P5);
Shelf Panel (P6);
Shelf Panel (P7);
Shelf Panel (P8);
2 x Back Panels (P9);
Back Panel (P10);
Rail (P11);Shelf Panel (P12);
Door (P13); Door (P14);
4 x Legs (P15);
2 x Support Legs (P16);
Drawer Fronts (P17);
Drawer Backs (P18);
Left Drawer Sides (P19);
Right Drawer Sides (P20);
Drawer Bases (P21);
Hardware pack
Left Drawer
Side (P19)
Right Drawer
Side (P20)
Drawer Back
(P18)
Drawer Base
(P21)
Drawer Front
(P17)
16 x Cam
Bolts
(H3)
16 x Cam
Nuts
(H4)
20 x Dowels
(H1)
22 x Small
Screws
(H5)
1 x CL
Runner
Track
(H6)
1 x CR
Runner
Track
(H7)
1 x DR
Runner
(H9)
1 x DL
Runner
(H8)
8 x Long
Screws
(H2)
2 x Hinges
(H11)
16 x Bolts
(H15)
1 x Allen
Key
(H16)
8 x Screws
(H17)
1 x Screw
(H21)
1 x Safety
Strap
(H20)
2 x Washers
(H22)
12 x Wedges
(H18)
12 x Screws
(H19)
8 x Shelf
Plugs
(H23)
2 x Adjusters
(H24)
24 x Small
Screws
(H10)
3 x Catchers
(H14)
2 x Hinges
(H12)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
PAGE 4
DO NOT USE
fantasticfurniture.com.au
4 x Plates
(H25)
8 x Long
Screws
(H26)
3 x Screws
(H13)

(P8)
1 x CL Runner
Track (H6)
You will need
Step 1
H6
CL
H5
H6
H5
Attach 12 x Cam Bolts (H3) to Top Panel (P1), Right Side Panel (P3) and Shelf Panel
(P8). Tighten with a Phillips Head Screwdriver.
H7
CR
H5
1 x CR Runner
Track (H7)
6 x Small
Screws (H5)
Phillips Head
Screwdriver
(P8)
(P1)
H3
(P3)
H7
H5
12 x Cam Bolts
(H3)
PAGE 5
fantasticfurniture.com.au
Step 2
You will need
Attach 1 x CL Runner Track (H6) to Shelf Panel (P8) with 3 x Small Screws (H5).
Attach 1 x CR Runner Track (H7) to Right Side Panel (P3) with 3 x Small Screws (H5).
Tighten with a Phillips Head Screwdriver.
Phillips Head
Screwdriver
(P3)
H3
H3

(P13)
(P14)
You will need
Step 3
H10
H10
H11
H12
Attach 3 x Catchers (H14) to Top Panel (P1), Bottom Panel (P4) secure
with 12 x Small Screws (H5). Tighten with a Phillips head screwdriver.
8 x Small
Screws (H10)
Step 4
You will need
Attach 2 x Hinges (H11,H12) and 2 x Screws (H13) to Doors (P13,P14), securing with 8 x
Small Screws (H10). Tighten with a Phillips Head Screwdriver.
Phillips Head
Screwdriver
12 x Small
Screws (H5)
3 x Catchers
(H14)
(P4)
(P1)
Phillips Head
Screwdriver
2 x Hinges
(H11)
2 x Hinges
(H12)
H10
H11
H11
H12
H5
H14
H5
H14
H5
H14
PAGE 6
fantasticfurniture.com.au
2 x Screws
(H13)
H13
H13

You will need
Step 6
You will need
Step 5
Attach Bottom Panel (P4) to Left Side Panel (P2), Right Side Panel (P3), Shelf Panel
(P7) and Shelf Panel (P8) with 8 x Dowels (H1) and secure with 8 x Long Screws (H2).
Tighten with a Phillips Head Screwdriver.
Attach Right Side Panel (P3) and Shelf Panel (P8) to Shelf Panel (P6) with 4 x Dowels
(H1) and secure with 4 x Cam Nuts (H4). Tighten with a Phillips Head Screwdriver.
(P3)
(P8)
(P6)
H1
H4
H4
(P2)
(P3)
(P8)
(P7)
(P4)
4 x Cam Nuts
(H4)
Phillips Head
Screwdriver
4 x Dowels
(H1)
H1 H2
Phillips Head
Screwdriver
8 x Dowels
(H1)
8 x Long
Screws (H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
fantasticfurniture.com.au PAGE 7

Step 8
Slide remaining Back Panels (P9,P10) into the groovesof Left Side Panel (P2), Shelf
Panel (P7), Shelf Panel (P8) and Right Side Panel (P3).
Attach 4 x Plates (H25) and 4 x Legs (P15) secure with 8 x Long Screws (H26), attach 4 x Legs
(P15) and 2 x Support Legs (P16) to Bottom Panel (P4) and secure with 16 x Bolts (H15).
Tighten with an Allen Key (H16). Insert the 2 x Adjusters (H24) into the middle Support Legs (P16).
Step 7
You will need
(P16)
(P4)
(P9)
(P9)
(P10) (P3)
(P2)
(P7)
(P8)
Ensure laminated
side of panel is
facing inwards.
H24
16 x Bolts
(H15)
1 x Allen Key
(H16)
2 x Adjuster
(H24)
(P16)
H24
H16
H15
(P15)
(P15)
H15
fantasticfurniture.com.au PAGE 8
(P15)
H25
H26
H16
Phillips Head
Screwdriver
4 x Plates
(H25)
8 x Long
Screws (H26)

You will need
Step 10
Press Shelf Panel (P12) against Right Side Panel (P3), then slide Shelf Panel
(P12) between Shelf Panel (P6) and Top Panel (P1) to form the unit as shown.
Attach Shelf Panel (P12) to Right Side Panel (P3) with 2 x Screws (H17).
Tighten with a Phillips Head Screwdriver.
Attach Top Panel (P1) to Left Side Panel (P2), Right Side Panel (P3), Shelf Panel
(P7) and Shelf Panel (P8) with 8 x Dowels (H1) and secure with 8 x Cam Nuts (H4).
Tighten with a Phillips Head Screwdriver.
You will need
Step 9
H1
H4
H1
H4
(P1)
(P3)
(P2)
(P7)
(P8)
Phillips Head
Screwdriver
8 x Cam Nuts
(H4)
8 x Dowels
(H1)
Phillips Head
Screwdriver
2 x Screws
(H17)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P1)
H17
(P12)
(P3)
(P6)
(P12)
(P6)
(P3)
fantasticfurniture.com.au PAGE 9

You will need
Step 12
Insert 8 x Shelf Plugs (H23) into the end cavities of the cabinet as shown.
Insert the 2 x Shelf Panels (P5) and balance on top of the plugs.
Press Rail (P11) against Top Panel (P1), then slide Rail (P11) between Shelf Panel (P12) and Top
Panel (P1) to form the unit as shown. Attach Rail (P11) to Top Panel (P1) with 2 x Screws (H17).
Tighten with a Phillips Head Screwdriver.
You will need
Step 11
Phillips Head
Screwdriver
2 x Screws
(H17)
H17
(P11)
(P1)
(P2)
(P8)
(P5)
(P5)
H23
H23
(P7)
8 x Shelf Plug
(H23)
(P11)
(P12)
(P12)
(P1)
fantasticfurniture.com.au PAGE 10

You will need
Step 13
You will need
Step 14
Attach 4 x Cam Bolts (H3) and 1 x Screw (H13) to Drawer Front (P17) as shown.
Tighten with a Phillips Head Screwdriver.
Secure Door Panels (P13, P14) to the main unit by attaching the other end of the 2 x Hinges
(H11,H12) with 16 x Small Screws (H10) as shown. Tighten with a Phillips Head Screwdriver.
(P17)
H3
(P13)
(P14)
H12
H10
(P2)
(P8)
Phillips Head
Screwdriver
16 x Small
Screws (H10)
4 x Cam Bolts
(H3)
Phillips Head
Screwdriver
1 x Screw
(H13)
H13
fantasticfurniture.com.au PAGE 11

(P21)
(P17)
(P19)
(P20)
You will need
Step 15
4 x Cam Nuts
(H4)
H4
H4
Attach Drawer Back (P18) to Drawer Sides (P19, P20) with 4 x Screws (H17),
make sure that the groove lines up the whole way around the drawer.
Tighten with a Phillips Head Screwdriver.
Slide the Drawer Base (P21) into the grooves between drawer sides as shown.
Phillips Head
Screwdriver
Ensure laminated
side of panel is
facing inwards.
Step 16
Attach Drawer Sides (P19, P20) to Drawer Front (P17). Insert 4 x Cam Nuts (H4) into the holes
of Drawer Sides (P19, P20). Make sure the opening on cam nuts point towards the incoming
cam bolts. Tighten with a Phillips Head Screwdriver.
(P19)
(P20)
Phillips Head
Screwdriver
You will need
4 x Screws
(H17)
Step 17
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P18)
(P19)
(P20)
H17
fantasticfurniture.com.au PAGE 12

H14
(P19)
(P20)
You will need
Step 18
Step 19
Insert the assembled drawers into the corresponding compartments as shown.
Ensure the drawers slide easily along the rails.
H5
H8
H9
Attach 1 x DL Runner (H8) to Left Drawer Side (P19) and 1 x DR Runner (H9) to Right
Drawer Side (P20) with 4 x Small Screws (H5) using a Phillips Head Screwdriver.
4 x Small
Screws (H5)
1 x DL Runner
(H8)
1 x DR Runner
(H9)
Phillips Head
Screwdriver
fantasticfurniture.com.au PAGE 13
If the doors and drawer
fronts are not flush or
can’t be bounced.
Please adjust the head
of Catcher accordingly.

Use 1 x Screw (H21) and 1 x Washer (H22) to connect 1 x Safety Strap (H20) on Top
Panel (P1). Secure Back Panels (P9,P10) in place with 12 x Wedges (H18) using
12 x Screws (H19). Tighten with a Phillips Head Screwdriver.
Move the entertainment unit to the final position, and attach the safety strap to the
wall securely. Make sure it is firmly attached and snug fit.
Step 21
You will need
(P9)
(P9)
(P10)
H22
Screw
Wall
Step 20
Phillips Head
Screwdriver
1 x Safety
Strap (H20)
1 x Screw
(H21)
You will need
1 x Washer
(H22)
12 x Wedges
(H18)
12 x Screws
(H19)
Phillips Head
Screwdriver
1 x Washer
(H22)
Screw and Wall Plug
are not provided.
Please use appropriate
fixtures for your wall.
H18
H19
H20
H21
H22
H18
H19
H20
H21
H22
(P1)
fantasticfurniture.com.au PAGE 14
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.

Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
fantasticfurniture.com.au PAGE 15