fantastic furniture Twilight Robe User manual

Version 1.0
fantasticfurniture.com.au
Robe 1 Door
Twilight

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling.We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
professional advice if you are in doubt of what wall connections to
use.
Love it? Share it!
Fantastic buy! Share how it looks athome on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Page 2

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item isfully assembled.
! Never use power tools unless specifically instructed.They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If ling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Bottom Panel (P4);
Back Panel (P5);
Back Panel (P6);
Divider (P7);
Shelf Panel (P8);
Shelf Panel (P9);
Rail (P10);
Door (P11);
2 x Shelf Panel (P12)
Hardware pack
Top Panel
(P1)
Bottom Panel
(P4)
Shelf Panel
(P12)
Shelf Panel
(P8)
Shelf Panel
(P12)
Rail
(P10)
Door
(P11)
Shelf Panel
(P9)
Right Side
Panel (P3)
Left Side
Panel (P2)
Back
Panel
(P5)
Back
Panel
(P6)
Divider
(P7)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 4
fantasticfurniture.com.au
DO NOT USE
22 x Dowels
(H1)
8 x Long
Screws
(H2)
18 x Screws
(H5)
8 x Small
Screws
(H18)
16 x Cam
Bolts
(H3)
16 x Cam
Nuts
(H4)
2 x Hanging Rail
Supports
(H10)
3 x Hinges
(H9)
1 x Hanging
Rail
(H11)
10 x Wedges
(H13)
4 x Plastic
Glides
(H12)
14 x Wedge
Screws
(H14)
1 x Washer
(H17)
2 x Magnetics
(H6)
2 x Magnetics
Bars
(H7)
8 x Shelf
Supports
(H8)
1 x Handle
(H15)
1 x Handle
Screw
(H16)

4 x Cam Bolts
(H3)
(P2)
(P3)
(P7)
(P7)
You will need
Step 1
Step 2
You will need
Attach 10 x Cam Bolts (H3) to Left & Right Side
Panels (P2 & P3) as shown by tightening with the Phillips
Head Screwdriver.
fantasticfurniture.com.au Page 5
10 x Cam Bolts
(H3)
Phillips Head
Screwdriver
Phillips Head
Screwdriver
Attach 4 x Cam Bolts (H3), 1 x Magnetic (H6) to Divider (P7)
with 2 x Wedge Screws (H14) as shown by tightening
with the Phillips Head Screwdriver.
H3
H3
H3
H3
H3
H6
H6
H14
H14 H14
H3
H3
H3 H3
H3
H3
H3
H3
H3
1 x Magnetic
(H6)
2 x Wedge
Screws (H14)

2 x Cam Bolts
(H3)
(P9)
(P4)
(P4)
(P10)
(P8)
(P7)
fantasticfurniture.com.au Page 6
Step 3
You will need
Insert 4 x Dowels (H1) into Shelf Panels (P8 & P9).
Insert 4 x Cam Nuts (H4) into Shelf Panels (P8 & P9).
Rotate the nuts so the arrows point towards the incoming bolts.
Attach Shelf Panels (P8 & P9) to Divider (P7) by tightening all nuts
with the Phillips Head Screwdriver.
H3
H3
H4
H4
H4
H4
H4
H1
H1
H1
Step 4
You will need
Phillips Head
Screwdriver
2 x Cam Nuts
(H4)
Phillips Head
Screwdriver
4 x Cam Nuts
(H4)
4 x Dowels
(H1)
Insert 2 x Cam Bolts (H3) into Bottom Panel (P4). Tightening with the Phillips Head Screwdriver.
Insert 2 x Cam Nuts (H4) into Rail (P10). Rotate the nuts so the arrows point towards the
incoming bolts. Attach Rail (P10) to Bottom Panel (P4) by tightening all nuts with the
Phillips Head Screwdriver.

Step 6
You will need
Insert 2 x Dowels (H1) into Divider (P7). Attach Bottom Panel (P4)
to Divider (P7) with 2 x Long Screws (H2) by tightening with the Phillips Head Screwdriver.
(P2)
(P9)
(P4)
(P4)
(P10)
(P7)
fantasticfurniture.com.au Page 7
Phillips Head
Screwdriver
5x Cam Nuts
(H4)
5 x Dowels
(H1)
Insert 5 x Dowels (H1) into Shelf Panel (P9), Bottom Panel (P4) and Rail (P10).
Insert 5 x Cam Nuts (H4) into Shelf Panel (P9), Bottom Panel (P4) and Rail (P10).
Rotate the nuts so the arrows point towards the incoming bolts.
Attach Left Side Panel (P2) to Shelf Panel (P9), Bottom Panel (P4) and Rail (P10)
by tightening all nuts with the Phillips Head Screwdriver.
H2
H1
H2
Step 5
You will need
Phillips Head
Screwdriver
2 x Dowels
(H1)
2 x Long
Screws (H2)
H1
H1
H1
H1
H4
H4
H4
H4
Required
Two People

Step 8
Slide Back Panels (P5 & P6) into the grooves of Left & Right Side Panel (P2 & P3)
and Divider (P7).
You will need
Step 7
Insert 5 x Dowels (H1) into Shelf Panel (P8), Bottom Panel (P4) and Rail (P10).
Insert 5 x Cam Nuts (H4) into Shelf Panel (P8), Bottom Panel (P4) and Rail (P10).
Rotate the nuts so the arrows point towards the incoming bolts.
Attach Right Side Panel (P3) to Shelf Panel (P8), Bottom Panel (P4) and Rail (P10) by
tightening all nuts with the Phillips Head Screwdriver.
(P4)
(P10)
(P8)
(P3)
fantasticfurniture.com.au Page 8
Phillips Head
Screwdriver
5 x Cam Nuts
(H4)
5 x Dowels
(H1)
H4
H4 H4
H4
H1
H1
H1
H1
H1
Required
Two People
(P2)
(P5)
(P6)
(P3)
(P7)

You will need
Step 9
You will need
Step 10
Phillips Head
Screwdriver
Hammer
Insert 6 x Dowels (H1) into Left & Right Side Panel (P2 & P3) and Divider (P7).
Attach Top panel (P1) to Left & Right Side Panel (P2 & P3) and Divider (P7) with 6 x Long
Screws (H2) by tightening with the Phillips Head Screwdriver.
Attach 4 x Plastic Glides (H12) to Left & Right Side Panel (P2 & P3) .
Lift the unit until it is vertical.
1 x Magnetic
(H6)
2 x Wedge
Screws (H14)
(P1)
4 x Plastic
Glides (H12)
Attach 1 x Magnet (H6) to Top Panel (P1) with 2 x Wedge Screws (H14) as
shown by tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au Page 9
Phillips Head
Screwdriver
6 x Dowel
(H1)
H14 H14
H6
6 x Long
Screws (H2)
H14 H14
H6
Required
Two People
(P2)
(P1)
(P3)
(P7)
H2
H2
H2
H2
H12
H12
H12
H12
H1
H1
H1
H1

You will need
Step 12
Step 11
You will need
Phillips Head
Screwdriver
Attach 2 x Hanging Rail Supports (H10) to the Left Side Panels (P2) and Divider (P7) with
4 x Small Screws (H18) by tighten with a Phillips Head Screwdriver.
Attach 1 x Hanging Rail (H11) to Hanging Rail Support (H10) as shown .
Attach 2 x Magnetics Bars (H7) to Door (P11) with 4 x Small Screws (H18).
Attach 3 x Hinges (H9) to Door (P11) with 6 x Screws (H5).
Tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
6 x Screws
(H5)
2 x Hanging Rail
Supports (H10)
1 x Hanging
Rail (H11)
H11
H18
H18
H5
H7
H7
H18
H18
H9
H10
fantasticfurniture.com.au Page 10
H11
(P3)
(P7)
(P11)
(P2)
3 x Hinges
(H9)
4 x Small
Screws (H18)
4 x Small
Screws (H18)
H5
H9
H5
H9
H5 H5
H9
H7
H18 H18
2 x Magnetics
Bars (H7)
Required
Two People

You will need
Step 14
Attach Door (P11) to Left Side Panel (P2) with 12 x Screws (H5). Attach 1 x Handle (H15) to
Door (P11) with 1 x Handle Screw (H16). Tightening with the Phillips Head Screwdriver.
You will need
Step 13
Phillips Head
Screwdriver
Insert 8 x Shelf Supports (H8) into the
holes of the Right Side Panel (P3) and
Divider (P7) at your preferred shelf
height.
Insert the 2 x Shelf Panels (P12) into the
unit by resting each shelf on the Shelf
Supports.
Ensure ea shelf is positioned securely.
1 x Handle
(H15)
1 x Handle
Screw (H16)
fantasticfurniture.com.au Page 11
(P7)
(P11)
(P3)
(P12)
(P12)
(P2)
12 x Screws
(H5)
H5
H15
H16
H5
H5
H8
H8
H5
H9
(P11)
H15
H16
8 x Shelf
Supports (H8)
Required
Two People

You will need
Step 15
Phillips Head
Screwdriver
Secure Back Panels (P5 & P6) in place with 10 x Wedges (H13) and 10 x Wedge Screws (H14)
by tightening with the Phillips Head Screwdriver.
Move the unit to the final position, and attach the safety strap to the wall securely.
Make sure it is firmly attached and snug fit.
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
fantasticfurniture.com.au Page 12
10 x Wedges
(H13)
10 x Wedge
Screws (H14) (P5)
(P6)
H13
H14
H17
wall
Screw
You will need
Step 16
Phillips Head
Screwdriver
1 x Washer
(H17)
Screw and Wall Plug
are not provided.
Please use appropriate
fixtures for your wall.

Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
fantasticfurniture.com.au Page 13

TO ADJUST YOUR DOORS TO MAKE THE GAPS MORE EVEN
Open the door.
1. .3.2
1. .3.2
1. .3.2
STEP 1
Adjust the door panels
upward or downward
STEP 2
Adjust the flush between
door panel and side panel
STEP 3
Adjust the Gap beteen
door panel and side panel
STEP 4
fantasticfurniture.com.au Page 14
Unscrew 2 screws in round
holes loosen 2 screws in oval
holes a bit.
MOVE DOOR OUTWARD
by turning this screw
counter-clockwise
Loosen this screw a bit.
MOVE DOOR BACK OR
FORTH Re-tighten this screw.
KEEP DOOR IN RIGHT
POSITION MOVE DOOR OUTWARD
by turning this screw clockwise
Tighten 2 screws in oval
holes. Screw in 2 screws in
round holes
MOVE DOOR UPWARD
OR DOWNWARD
Panel
Door