fantastic furniture Baxter User manual

Version 1.0
Baxter
Egg Chair 1 Seater
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Look like you’ve found
your Fantastic!
Care Tips for Powder Coated Products
Following the general care instructions below will help extend the life of
your product and keep them looking their best!
high-pressure as this may damage the product.
For further cleaning use a dampened cloth with a mild soap and water
thoroughly dry. Avoid using bleach and other harsh, or abrasive chemicals
as they can damage the product.
To increase the lifespan of your product we discourage prolonged or exces-
sive exposure to sunlight and other inclement weather, as well as substanc-
es like suntan oils and heavily chlorinated water as this may cause products

R ead through the instructions carefully
before you begin.
Ma ke sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
rostnenopmocruoyegamadnacyehT.detcurtsniyllacfiicepssselnuslootrewopesureveN!
hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
.rehtegotgnolebstrapehttahtniatrecerauoylitnueulgynaesureveN!
rofetisbewrolebaleractcudorpehtkcehC.srenetsafllanethgit-erdnakcehcyllacidoireP!
product care instructions.
!
components please visit our website Help
Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
fantasticfurniture.com.au Page 3
Assembly checklist
Useful Information

8 x Short Bolts
(H1)
4 x Long Bolts
(H2)
12 x Metal Washers
(H3)
1 x Allen Key
(H5)
Page 4
What you need
to assemble the product
fantasticfurniture.com.au
5 x Adjusting Feet
(H4)
Parts list
Upper Half Basket (P1);
Lower Half Basket (P2);
Connector (P3);
Support Leg (P4);
Cushion (P5);
Small Cushion (P6);
Hardware pack
1 x Lower Half Basket (P2)
1 x Upper Half Basket (P1)
1 x Connector (P3)
1 x Support Leg (P4)
1 x Cushion (P5)
1 x Small Cushion (P6)

Step 2
(H5)
(H1)
(H3)
P3
Attach 5 x Adjusting Feet (H4) to 1 x Support Leg (P4).
Adjust the length of the feet by turning clockwise or anti-clockwise according to the ground.
Attach 1 x Connector (P3) to Support Leg (P4) using 4 x Short Bolts (H1) and 4 x Metal
Washers (H3), tighten with Allen Key (H5).
Page 5
You will need
4 x Metal Washers
(H3)
Allen Key (H5)
fantasticfurniture.com.au
5 x Adjusting Feet
4 x Short Bolts (H1)
Step 1
You will need
(H4)
(H4)
P4

Step 3
Step 4
Page 6
With assistance, attach Upper Half Basket (P1) to Lower Half Basket (P2) using
4 x Long Bolts (H2) and 4 x Metal Washers (H3) , tighten with Allen Key (H5) as
shown.
fantasticfurniture.com.au
4 x Short Bolts (H1)
With assistance, attach Connector (P3) to Lower Half Basket (P2) using 4 x Short Bolts (H1)
and 4 x Metal Washers (H3), tighten with Allen Key (H5).
You will need
(H3)
(H5)
Allen Key
4 x Metal Washers
4 x Long Bolts (H2)
You will need
(H3)
Allen Key (H5)
4 x Metal Washers
P2
P4
(H5)
(H1)
(H3)
P1
P2
(H5)
(H3)
(H2)

Step 5
Step 6
Page 7
Place Cushion (P5) on the Small Cushion (P6).
Fully tighten all Short and Long Bolts (H1, H2) on Egg Chair ensuring it remains stable.
With assistance, carefully move the Baxter Swivel Egg to it's desired spot.
fantasticfurniture.com.au
P6
Place Small Cushion (P6) on the Lower Basket (P2).

IMPORTANT: Fully tighten all bolts on chair. Periodically check to ensure all bolts remain tight.
In the interest of our environment please dispose of all packaging thoughtfully.
Job Complete!
fantasticfurniture.com.au Page 8
Step 7