fantastic furniture TALLBOY 5 DRW User manual

Assembly Instructions
TALLBOY 5 DRW
VER 1.1
HAYMAN

Page 3
What You Need
To Assemble The Body
Top Panel
(P1)
Right Side
Panel
(P3)
Left
Drawer
Side (P10)
Drawer Front
(P9)
×5
Right Drawer
Side (P11)
Drawer Back
(P13)
Drawer
Base
(P12)
Left Side
Panel
(P2)
Rail
(P15)
Rail
(P4)
Rail
(P6)
Rail
(P5)
Rail
(P7)
4 x Back
Panels
(P8)
2 x
Connect
Stick
(P14)
(Tools not provided)
Flat Blade Screwdriver
Phillips Head Screwdriver
Mallet
8 x Dowels
(H1)
20 x Long
Screws
(H2)
50 x Small
Screws
(H5)
5 x CL Runner
Tracks
(H6)
40 x Cam Bolts
(H3)
40 x Cam Nuts
(H4)
5 x CR Runner
Tracks
(H7)
5 x DL
Runners
(H8)
5 x DR
Runners
(H9)
10 x Handles
(H10)
Please make sure you have all these parts before you start.
10 x Bolts
(H11) 1 x Screw
(H13)
1 x Safety Strap
(H12)
2 x Washers
(H14)
1x Safety
Strap Set
8 x Wedges
(H15)
8 x Screws
(H16)
3 x Long Screws
(H17)

Page 4
Step 1
You will need:
5 x CL Runner
Tracks
(H6)
5 x CR Runner
Tracks
(H7)
30 x Small
Screws
(H5)
Attach 5 x CL Runner Tracks (H6) to Left Side Panel (P2) with 15 x Small Screws (H5).
Attach 5 x CR Runner Tracks (H7) to Right Side Panel (P3) with
15 x Small Screws (H5).
H6
CL
H5
H7
CR
H5
H5
H5
H6
H6
H6
H6
H5
H5
H5
H6
H5
H5
H5
H5
H5
H5
H5
H5
(P2)
H5
H5
H5
H5
H5
H5
H5
H5
H5
H7
H7
H7
H7
H7
H5
H5
(P3)
H5
H5
H5
H5
H5
H5

Step 2
You will need:
Page 5
Step 3
4 x Dowels
(H1)
16 x
Cam Bolts
(H3)
H3
H3
H3
H3
H3
You will need:
4 x Cam Nuts
(H4)
Insert 4 x Dowels (H1) into Left Side Panel (P2).
Attach 16 x Cam Bolts (H3) into Side Panels (P2) and (P3) as shown.
Insert 4 x Cam Nuts (H4) into the holes of Rails (P6) and (P7).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Rails (P6) and (P7) to Left Side Panel (P2), then tighten the cam nuts.
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P2)
(P6)
(P7)
(P3)
H3
H3
H3
H3
H3
H3
H3 H3
H1 H1
H3
H3
H1 H1
H3
(P2)
H4
H4
H4
H4

(P15)
(P4)
(P2)
(P4)
(P15)
(P5)
(P6)
(P7)
(P5) (P6) (P7)
(P8)
(P14)
Page 6
Step 4
(P2)
(P3)
You will need:
4 x Cam Nuts
(H4)
Insert 4 x Cam Nuts (H4) into the holes of Rails (P4 , P5) and (P15).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Rails (P4, P5) and (P15) to Left Side Panel (P2), then tighten the cam nuts.
Join 2 x Back Panels (P8) with Connect Stick (P14), then put into the groove of Rails (P6) and (P7).
Insert 4 x Dowels (H1) into Rails (P4).
Insert 8 x Cam Nuts (H4) into the holes of Rails (P4) and (P5,P6,P7,P15).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Right Side Panel (P3) into place and tighten the cam nuts.
H1 H1
H1 H1
Step 5
You will need:
8 x Cam Nuts
(H4)
4 x Dowels
(H1)
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
Make sure the side with bigger holes
is facing to Rail (P4).

(P1)
(P2)
(P14)
(P8)
(P3)
You will need:
4 x Cam Bolts
(H3)
H3
H3
H3
H3
Page 7
Step 6
Step 7
You will need:
4 x Cam Nuts
(H4)
H4
H4
H4
Attach 4 x Cam Bolts (H3) into Top Panel (P1) as shown.
Join 2 x Back Panels (P8) with Connect Stick (P14),
then put into the groove of Side Panels (P2) and (P3).
Insert 4 x Cam Nuts (H4) into the holes of Side Panels (P2) and (P3).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P1) and tighten the cam nuts.

Page 8
(P1)
(P8)
(P8)
Step 8
You will need:
Step 9
You will need:
8 x Wedges
(H15)
8 x Screws
(H16)
Make sure Wedge (H15) is facing
to the bottom of Top Panel (P1) as shown.
Secure Back Panel (P8) in place with 8 x Wedges (H15) using 8 x Screws (H16).
H15
H16 H15
H16
3 x Long Screws
(H17)
Attach Rail (P15) to Top panel (P1) with 3 x Long Screws (H17).
(P1)
H17
H17
H17
(P15)
H17
(P15)
(P1)

H3 H3
H3
H3
H4 H4
H4
H4
Step 10
You will need:
4 x Cam Bolts
(H3)
Step 12
Step 13
You will need:
(P9)
(P10) (P11)
(P9)
(P9)
(P12)
(P10)
(P10)
(P11)
(P11)
4 x Cam Nuts
(H4)
Attach 4 x Cam Bolts (H3) to Drawer Front (P9) as shown.
Insert 4 x Cam Nuts (H4) into the holes of
Drawer Sides (P10,P11).
Rotate the cam nuts
so the arrows point towards the incoming cam bolts.
Push Drawer Sides (P10,P11) into place and tighten the cam nuts.
Slide Drawer Base (P12) into the groove
in Drawer Sides (P10) and (P11).
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Page 9
Step 11
You will need:
1 x DR Runner
(H9)
1 x DL Runner
(H8)
4 x Small
Screws
(H5)
Attach 1 x DL Runner (H8) to Left Drawer Side (P10)
and 1 x DR Runner (H9) to Right Drawer Side (P11)
with 4 x Small Screws (H5).
H5 H9
H8
H5
H5
H5

Page 10
H2
H10
H11
H10
H11
Step 14
You will need:
4 x Long Screws
(H2)
Step 15
Step 16
(P13)
(P10)
(P11)
H2
H2
H2
Attach 2 x Handles (H10) to Drawer Front (P9) with 2 x Bolts (H11).
Repeat Step 10 to Step 15 to assemble other drawers.
Attach Drawer Back (P13) to Drawer Sides (P10,P11) with 4 x Long Screws (H2).
Make sure that the groove lines up the whole way around the drawer.
You will need:
2 x Handles
(H10)
2 x Bolts
(H11)