fantastic furniture Havana Lowline Medium User manual

Version 1.0
Havana
Lowline Medium
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Recommended weight capacity : 80kg.

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

16 x Dowels
(H1)
16 x Small Dowels
(H2)
22 x Cam Bolts
(H3)
22 x Cam Nuts
(H4)
5 x Plastic
Glides
(H5)
1 x Allen Key
(H12)
2 x Rubber
Stickers
(H13)
2 x Handles
(H8)
4 x Round Head
Bolts
(H9)
6 x Inside
Hexagonal Screws
(H11)
4 x Hinges
(H6)
24 x Timber
Screws
(H7)
Top Panel
(P1)
Back
Panel
(P11)
Side
Panel
(P5)
Side
Panel
(P5)
Bottom
Panel
(P2)
Left
Divider
(P3)
Shelf
Panel
(P6)
LR
Leg
(P9)
RR
Leg
(P10)
RF Leg
(P8)
LF Leg
(P7)
Right
Divider
(P4)
Left Door
(P13)
Support Leg
(P12)
Right Door
(P14)
1 x Double Ended
Screws
(H10)
Parts list
Top Panel (P1);
Bottom Panel (P2); Left Divider (P3);
Right Divider (P4);
Side Panel (P5); Shelf Panel (P6);
LF Leg (P7); RF Leg (P8); LR Leg (P9);
RR Leg (P10); Back Panel (P11);
Support Leg (P12);
Left Door (P13); Right Door (P14;)
Page 4
fantasticfurniture.com.au
What you need
to assemble the product
Other tools you need:
Phillips Head Screwdriver;
Hammer
DO NOT USE
Hardware pack

(P10)
(P3)
(P3)
(P6)
(P4)
(P9)
(P8) (P7)
H3
H4 H4
H4
H2
H2
H3
H3
H3
H3
H3
H3
H3 H3
H3
(P1)
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
Attach 10 x Cam Bolts (H3) into Top Panel (P1).
Attach 8 x Cam Bolts (H3) into Legs (P7,P8,P9,P10).
Tighten Cam Bolts using a Phillips Head Screwdriver
Insert 4 x Small Dowels (H2) and 4 x Cam Nuts (H4) into Shelf Panel (P6) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Dividers (P3, P4) to Shelf Panel (P6),
then tighten the cam nuts using a Phillips Head Screwdriver.
Attach 2 x Cam Bolts (H3) into Dividers (P3) using a Phillips Head Screwdriver.
Repeat Step 2 for Right Divider (P4).
18 x Cam Bolts
(H3)
You will need
Step 1
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)
You will need
Step 2
Phillips Head
Screwdriver
Phillips Head
Screwdriver
4 x Small
Dowels (H2)
You will need
Step 3
4 x Cam Nuts
(H4)
Make sure raw edge
is facing up.
Page 5
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.

(P2)
(P10)
(P10)
(P9)
(P9)
H1
H4
H4
H4
H4
H1
Insert 4 x Cam Nuts (H4) into Side Panels (P5).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Side Panels (P5) to Legs (P9, P10),
then tighten the cam nuts using a Phillips Head Screwdriver.
Insert 4 x Dowels (H1) into Bottom Panel (P2).
Insert 2 x Cam Nuts (H4) into the holes of Bottom Panel (P2) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Legs (P9, P10) to Bottom Panel (P2),
then tighten the cam nuts using a Phillips Head Screwdriver.
Back panel slot
(P5)
(P5)
You will need
Step 4
2 x Cam Nuts
(H4)
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
You will need
Step 5
H4
H4
Page 6
fantasticfurniture.com.au
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Phillips Head
Screwdriver

(P2)
(P7)
(P8)
(P5)
(P5)
H1
H1
H1
H4
H4
(P2)
(P5)
(P4)
(P3)
(P5)
Insert 4 x Dowels (H1) into Bottom Panel (P2).
Insert 2 x Cam Nuts (H4) into the holes of Bottom Panel (P2) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Legs (P7, P8) to Side Panels (P5), then tighten the cam nuts using a
Phillips Head Screwdriver.
H11
H11
H2
H2
H12
H11
H11
Insert 4 x Small Dowels (H2) into Dividers (P3, P4).
Attach Dividers (P3, P4) to Bottom Panel (P2) with
4 x Inside Hexagonal Screws (H11) using Allen Key (H12).
4 x Small
Dowels (H2)
1 x Allen
Key (H12)
4 x Inside
Hexagonal
Screws (H11)
You will need
Step 7
You will need
Step 6
2 x Cam Nuts
(H4)
4 x Dowels
(H1)
Make sure PVC
banding is facing up.
H1
Page 7
fantasticfurniture.com.au
Phillips Head
Screwdriver

H1 H1
H1 H1
H1
H1
H1 H1
(P2)
(P11)
(P9)
(P10)
(P9)
(P7)
(P8)
(P10)
Insert 8 x Dowels (H1) into Legs (P7, P8, P9, P10).
Slide Back Panel (P11) into
the groove in Legs (P9,P10) and Bottom Panel (P2).
You will need
Step 9
8 x Dowels
(H1)
Step 8
Page 8
fantasticfurniture.com.au

H4 H4
H4
H4
H2
H2 H2
H2
H2 H2
H2
H2 H4
H4
H4
(P1)
Insert 8 x Small Dowels (H2) into Dividers (P3, P4) and Side Panels (P5).
Insert 10 x Cam Nuts (H4) into the holes of Dividers (P3, P4) and Legs (P7, P8, P9, P10).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P1) and tighten the cam nuts using a Phillips Head Screwdriver.
You will need
Step 10
10 x Cam Nuts
(H4)
8 x Small
Dowels (H2)
Page 9
fantasticfurniture.com.au
Phillips Head
Screwdriver

H5
H5
H5
H5
H5
H7 H7
(P13)
(P2) (P12)
H8
H9
H9
H7 H7
H6
H6
H7
H6
H7
Attach 2 x Hinges (H6) to Left Door (P13) with 4 x Timber Screws (H7).
Attach 1 x Handles (H8) to Left Door (P13) with 2 x Round Head Bolts (H9).
Tighten Screws and Bolts using a Phillips Head Screwdriver.
Repeat Step 12 for Right Door (P14).
H11
H11
H12
H10
Phillips Head
Screwdriver
You will need
Step 12
8 x Timber
Screws (H7)
4 x Hinges
(H6)
2 x Handles
(H8)
4 x Round Head
Bolts (H9)
1 x Allen
Key (H12)
2 x Inside
Hexagonal
Screws (H11)
You will need
Step 11
Screw 2 x Inside Hexagonal Screws (H11) to Bottom Panel (P2) with Allen Key (H12).
Attach Support Leg (P12) to Bottom Panel (P2) with 1 x Double Ended Screws (H10),
then hammer 5 x Plastic Glides (H5) on Legs (P7, P8, P9, P10) and Support Leg (P12).
5 x Plastic
Glides (H5)
1 x Double
Ended
Screws (H10)
Hammer
Page 10
fantasticfurniture.com.au