fantastic furniture HOME ROBE INSERT User manual

Assembly Instructions
HOME ROBE INSERT
2 Drawer Small Pack

WHAT YOU NEED
STEP 1
GLUE ALL DOWEL JOINTS!
Place the drawer side on to the back and front panel
using the guide holes provided.
Screw in the runners to the bottom of the drawer as
shown in picture.
8 x 13mm C/S SCREWS 2 x Sets of 350mm DRAWERS
RUNNERS
8 x 20MM C/S SCREWS
8 x DRAWER SPACES
SLEEVE
8 x DRAWER SPACES 1 x PVA GLUE
Philips Head Screwdriver
(Not Supplied)

In the interest of our environment
Please dispose of all packaging thoughtfully.
YOUR UNIT IS NOW COMPLETE
Drawer Front
Drawer Back
When attaching the drawer
runner to the unit:
Insert DRAWER SPACER SLEEVE into
the gable in your desired position then
line up the DRAWER SPACER with the
holes on the runner and use the 20mm
C/S SCREW to fasten the runner to the
SLEEVE attached to the gable.
Repeat for both sides
***If positioning drawers above or below
each other allow 6 guide holes above or
below the drawer runner for the second
drawer***
Screw from the second
(2nd) hole in next to the
wheel on the runner
Front Edge Of Robe