fantastic furniture Roselle User manual

Version 1.0
fantasticfurniture.com.au
Bed Queen
Roselle

fantasticfurniture.com.au Page 2Page 2
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

Support Leg (P8) Support Leg (P8)
What you need
to assemble the product
fantasticfurniture.com.au Page 4
Headboard
(P1) Wing
(P2-R)
Wing
(P2-L)
Footboard
(P3)
Side Rail-R (P4)
Side Rail-L (P5)
Headboard and
Footboard Legs (P6) Timber Cross Rail
(P9)
Centre Rail (P7)
32 x End Connectors (P10) 16 x Centre Connectors (P11) 32 x Slats (P12)
Footboard (P3) ; 1 x Side Rail-R (P4) ;1 x Side Rail-L (P5) ;
Box 1 :
Parts list
4 x Headboard and Footboard Legs (P6) ; Centre Rail (P7) ; 2 x Support Legs (P8) ;
Box 2 : Headboard (P1) ; Wing (P2-L) ; Wing (P2-R) ; 32 x Slats (P12)
4 x 18mm Big Head Bolts
(H1)
1 x Allen Key
(H5)
(H3)
10 x Washers
(H4)
2 x Screws
Other tools you need:
Phillips head screwdriver
Hardware pack
Timber Cross Rail (P9) ;32 x End Connectors (P10) ; 16 x Centre Connectors (P11) ;
10 x Small Bolts
(H2)
4 x Large Bolts
1 x Felt Pad
(H6) (H7)
Hardware Pack
Headboard and
Footboard Legs (P6)

Attach 2 x Wings (P2-L; P2-R) to the Headboard (P1) with 4 x Washers (H4) and 4 x Large
fantasticfurniture.com.au Page 5
(P1)
(P2-R)
(P2-L)
(H5)
(H3) (H4)
You will need
1 x Allen Key
(H5)
4 x Large Bolts
(H3)
4 x Washers
(H4)
Step 1
(P1)
Bolts (H3), tightening with the Allen Key (H5) as shown.

(P1)
(P6)
Step 2
(P6)
Attach 2 x headboard legs (P6) to the bottom of the headboard (P1) and rotate to secure.
Step 3
(P3)
(P6)
(P6)
Attach 2 x footboard legs (P6) to the bottom of the footboard (P3) and rotate to secure.
Page 6

bracket on the Side Rails (P4/P5) over the bolts as shown.
fantasticfurniture.com.au Page 7
Insert 4 x Small Bolts (H2) into the nuts of the Headboard (P1) and 4 x Big Head Bolts (H1)
Do not fully tighten the bolts yet.
(P1)
(P4)
You will need
(H1) (H5)
1 x Allen Key
Step 4
4 x Small Bolts
(H2)
(P5)
(H5)
(H5)
(P1)
(P3)
(H2)
(P3)
(H1)
as shown.
Headboard Footboard
4 x 18mm Big Head Bolts
Attach 2 x Side Rails (P4/P5) to the Headboard (P1) and Footboard (P3) by slotting the
(P4/P5)
(P4/P5)
into the brackets of Footboard (P3), tightening two thirds of the way with the allen Key (H5)

fantasticfurniture.com.au Page 8
(P1)
(P3)
(P4)
(P7)
(H2)
(H4)
You will need
You will need
2 x Washers
(H4)
Step 5
Step 6
1 x Allen key
(H5)
(H2)
4 x Washers
(H4)
1 x Allen key
(H5)
(H5)
(P5)
Attach 2 x support legs (P8) to the centre rail (P7) using 2 x small bolts (H2) and 2 x
washers (H4) as shown, tightening with the allen key (H5).
there is a gap of 10mm between the bottom
Adjust the support legs (P8) so
of the legs and the floor.
Insert the centre rail (P7) between the headboard (P1) and footboard (P3) as shown.
Secure using 4 x small bolts (H2) and 4 x washers (H4), tightening with the allen key (H5).
Do not fully tighten the bolts yet.
2 x Small Bolts
(H2)
4 x Small Bolts
(P7)
(H2)
(H5)
(H4)
(P8)

fantasticfurniture.com.au Page 9
(P10) (P10)
(P11)
(P12) (P12)
You will need
32 x End
Connectors
(P10)
16 x Centre
Connectors
(P11)
32 x Slats
(P12)
1
2
3
Step 7
Connect 2 x End Connectors (P10), 2 x slats (P12) and a Centre Connector (P11) together
Insert the full slat into the side rails (P4/P5) and the centre rail (P7) by pressing down firmly.
Sometimes it makes it easier to line up the
holes if you press down in the middle of the slat to flatten it out.
(P1)
(P5)
(P4)
(P3)
(P7)
as shown.

(P9)
(H7)
(P9)
fantasticfurniture.com.au Page 10
2 x Screws
(H7)
(H5)
1 x Allen Key 1 x Felt Pad
(H6)
(P7)
(H6)
Ensure the screws
are fully tightened.
4
Step 8
You will need
Phillips head Screwdriver
(not provided)
Repeat for every bed slat until finished.
Ensure the inner space is square.
Place the felt pad (H6) on the centre of the centre rail (P7) as shown. Secure the timber cross
fully with the Phillips Head Screwdriver.
rail (P9) into place in the centre of the side rails (P4/P5) using 2 x screws (H7), and tightening
You may now fully tighten all bolts on the headboard (P1), footboard (P3) and
side rails (P4/P5).
(H5)
(H5)