fantastic furniture Avalon Lowboy User manual

Version 1.0
fantasticfurniture.com.au
Av alon
oy 4 Drawer Whitewash
Lowb

Secure it!
Wall attachment guide
For plasterboard
(with available wood stud)
Securing method:
Screw inserted directly into
stud.
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY OR DEATH.
To avoid any serious or fatal injury, a wall strap has been provided with this
product to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are not
included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
To reduce the risk of furniture tipover:
• Do not allow children to stand, climb or hang on furniture. It may topple
and cause serious injury or death.
• Do not place toys or other child appealing items on top of this furniture,
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
• Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
• Avoid putting a TV on this product.
Reduce the risk of furniture
tip-over accidents
Page 2
For plasterboard
(without available wood stud)
Securing method:
Self drilling plasterboard
anchor.
For masonry wall
Securing method:
Solid wall: Plug with screw
Hollow wall: Spring toggle
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.
Recommended weight capacity : kg on Top
10kg/Drawer
40

Page 3
fantasticfurniture.com.au
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
@fantasticfurniture

fantasticfurniture.com.au Page 4
Read through the instructions
carefully before you begin.
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screwsuntil the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a so t surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
components please visit our website Help Centre for further assistance.
Assembly checklist
!Please see page 2 for any safety requirements or weight restrictions.
Useful information

2 x Washers
Page 5
fantasticfurniture.com.au
What You Need
to assemble the product
Hardware Pack :
(H2) (H3) (H4)
( H17)
(H1) (H5)
30 x Cam Nuts 30 x Cam Bolts
(H6)
(H7)
14 x Dowels
(H8) Tracks (H9) Tracks (H11) (H12)
48 x Runner Screws 24 x Drawer Screws
(H13) (H14)
Other tools you need
Phillips Head screwdriver;Hammer
4 x CL Runner 4 x DL Runners
(H10)
4 x CR Runner 4 x DR Runners
4 x Handles 12 x Wedges 20 x Screws
Box 1:
4 x Feet (P2);
3 x Support Panels (P6);
4 x Drawer Back Panels (P8);
4 x Drawer Side Panels (L) (P9);
4 x Drawer Side Panels (R) (P10);
4 x Drawer Base Panels (P11);
4 x Drawer Front Panels (P13);
4 x Drawer Support Panels (P12);
Box 2:
Top Panel (P1);
Left Side Panel (P3);
Right Side Panel (P4);
Base Panel (P5);
Back Panel (P7);
Steel Bar (P14);
P1
P2
P3
P4
P5
P6
P6
P7
P8
P2
P2
P2
P9
P10
P11
P12
P13
P14
1 x Allen Key
x Screws
10
3x Screws
( H15)
4 x Screws
(H16)
x4
P6

Page 6
fantasticfurniture.com.aufantasticfurniture.com.au
Step 1
P3
P4
(H9)
(H11)
(H9)
(H11)
You will need
4 x CL Runner
Tracks (H9)
(H13)
Phillips Head
Screwdriver
4 x CR Runner
Tracks (H11)
24 x Runner
Screws
(H9)
(H9)
(H11)
(H11)
(H13)
(H13)
Step 2
P3
P4
(H6)
(H6)
(H6)
(H6)
(H7)
(H7)
(H7)
(H7)
(H7)
You will need
Phillps Head
Screwdriver
(H7)
14 x Dowels
(H6)
6 x Cam Bolts
(H6)
(H7)
(H7)
(H7)
(H7)
(H7)
(H7)
(H7)
Insert 6 x Cam Bolts (H6) into the Left Side Panel (P3) and Right Side Panel (P4), by
tightening with a Phillips Head Screwdriver.
Insert 14 x Dowels (H7) into the Left Side Panel (P3) and Right Side Panel (P4).
Insert 4 x CL Runner Tracks (H9) to the Left Side Panel (P3) with 12 x Runner Screws (H13), by
tightening with a Phillips Head Screwdriver.
Repeat process to attach 4 x CR Runner Tracks (H11) to the Right Side Panel (P4).
(H7)
(H7)
(H6)
(H6)

Page 7
fantasticfurniture.com.au
Step 4
You will need
Step 3
Phillps Head
Screwdriver P1
P14
(H6)
(H17)
(H6)
(H6)
(H6)
(H6)
(H2)
(H6)
4 x Cam Bolts
(H2)
3x Screws
( H17)
1 x Allen Key (H2)
(H2)
Phillips Head
Screwdriver
You will need
(H5)
3 x Cam Nuts
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
P3
P6 P6
(H5)
(H5)
Attach Steel Bar (P14) to the Top Panel (P1) with 3 x Screws (H2), by tightening with Allen Key
(H17).
Insert 4 x Cam Bolts (H6) into Top Panel (P1), by tightening with a Phillips Head Screwdriver.
P6
Insert 3 x Cam Nuts (H5) into 3 x Support Panels (P6) as shown. Rotate the Cam
Nuts so the arrows points towards the incoming bolts. Attach 3 x Support Panels
(P6) to Left Side Panel (P3) by tightening all cam nuts with the Phillips Head
Screwdriver.

Page 8
fantasticfurniture.com.au
Step 5
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
Phillips Head
Screwdriver
P3
P1
You will need
(H5)
4 x Cam Nuts
(H5)
(H5)
(H5)
Step 6
P4
Insert 4 x Cam Nuts (H5) into Left & Right Side Panel (P3 & P4). Attach Top Panel (P1) to
Left & Right Side Panel (P3 & P4) by tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
You will need
(H5)
3 x Cam Nuts
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
P4
P6 P6
(H5)
Insert 3 x Cam Nuts (H5) into Support Panels (P6) as shown. Rotate the Cam Nuts so
the arrows point towards the incoming cam bolts. Attach 3 x Support Panels (P6) to Right
Side Panel (P4) by tightening all cam nuts with the Phillips Head Screwdriver.
P6

Page 9
Step 7
fantasticfurniture.com.au
Step 8
Phillips Head
Screwdriver
You will need
4 x Screws
(H16)
(H16)
(H16)
(H16)
(H16)
P4
P7
P3
P5
Attach Base Panel (P5) into Left & Right Side Panel (P3 & P4) with 4x Screws (H16)
by tightening with the Phillips Head Screwdriver. Ensure the Back Panel (P7) is slotted
into the groove the Base Panel (P5) as well.
P1
P3
P4
P7
Raw side facing inside
Slide Back Panel (P7) into the grooves of Left & Right Side Panel (P3 & P4) and Top Panel (P1).

Page 10
You will need
Phillips Head
Screwdriver
(H3) x 12
(H4) x 12
P7
(H3) (H4)
12 x Wedges 12 x Screws
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H4)
(H4)
(H4)
(H4)
(H4)
(H4)
(H4)
(H4)
(H4)
(H4)
Step 10
fantasticfurniture.com.au
Step 9
P4
Secure Back Panel (P7) in place with 12 x Wedges (H3) using 12 x Screws (H4) by
tightening with the Phillips Head Screwdriver.
You will need
P5
P2
P2
P2
P2
( H17)
1 x Allen Key
(H8)
x Screws
8
( H17) (H8)
(H8)
(H8)
(H8)
( H17)
P2
(H8) (H8)
Attach 4 x Feet (P2) to Base Panel (P7) with 8 x Screws (H8) by tightening with an
Allen Key (H17).

Page 11
fantasticfurniture.com.au
Step 12
Step 11
(H6)
You will need
Phillips Head
Screwdriver
(H6)
20 x Cam Bolts
(H6)
(H6)
(H6)
(H6)
(H6)
P13 x 4
Insert 20 x Cam Bolts (H6) into the Drawer Front Panel (4 x P13), by tightening with a
Phillips Head
Screwdriver.
You will need
( H17)
1 x Allen Key
(H8)
x Screws
2
( H17)
(H8)
(H8)
P4
P3
( H17)
(H8)
P14
Slot in the Steel Bar (P14) into the Left Side Panel (P3) and Right Side Panel (P4)
and attach with 2 x Screws (H8) tightening with Allen Key (H17).

Page 12
fantasticfurniture.com.au
Step 13
P10
Step 14
P11
P9
Raw side facing bottom
P13 x 4
Slot in the Drawer Base Panel (P11) into the grooves of panels (P9 & P10) and Drawer Front
Panels (P9
& P10) as shown.
(H5)
(H5)
P9 x 4
P10 x 4
(H5)
P12 x 4
Phillips Head
Screwdriver
You will need
20 x Cam Nuts
(H5)
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
P13 x 4
Insert 5 x Cam Nuts into the Drawer Side Panel (P9 & P10) and Drawer Support Panel (P12).
Rotate the Cam nuts so the arrows point towards the incoming cam bolts.
Attach the Drawer Front Panels (P13) to the Drawer Side Panel (P9 & P10), by tightening
Cam Nuts
with the Phillips Head Screwdriver.
Repeat for the remaining drawers

Page 13
fantasticfurniture.com.au
Step 15
You will need
Phillips Head
Screwdriver
(H12)
(H13)
(H12)
(H10) (H13)
(H13)
(H13)
(H13)
P10
P9
(H13)
24 x Runner
Screws
4 x DL Runners
4 x DR Runners
(H10)
Step 16
(H13)
(H13)
Attach 1 x DL Runner (H12) to the bottom of Drawer Side Panel L (P9) and 1 x DR
Runner (H10)
to the
bottom of Drawer Side Panel R (P10) with 6 x Runner Screws
(H13) by tightening with
the Phillips Head
Screwdriver.
Repeat process for the remaining drawers
(H14)
You will need
Phillips Head
Screwdriver
24 x Drawer
Screws (H14)
(H14)
(H14)
(H14)
P12
P10
P9
P8
Attach the Drawer Back Panel (P8) to the Drawer Side Panel (P9 & P10) and Drawer Support
(P12) with
6 x Drawer Screws (H14), by tightening with a Phillips Head Screwdriver.
Before securing ensure the Drawer Base Panel (P11) lines up with the grooves the whole way
around
the drawer.
Repeat process for remaining drawers.

Step 18
Page 14
fantasticfurniture.com.au
P13
Step 17
P13
P13
P13
Insert the assembled drawers into the corresponding compartments as shown.
Ensure the drawers slide easily along the rails
(H4)
8 x Screws
You will need
Phillips Head
Screwdriver
(H4)
(H4)
P13 x 4
(H1)
4 x Handles
(H1)
Attach the 4 x Handles to the 4 x Drawer Front Panels (P13) with 8 x Screws (H4) by
tightening with a Phillips Head Screwdriver.

Step 19
Page 15
fantasticfurniture.com.au
2 x Washers
You will need
( H15)
( H15)
Screw and Wall Plug are not
provided. Please use
appropriate fixtures for
your wall.
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
Move the unit to the final position, and attach the safety strap to the wall securely.
Make sure it is firmly attached and snug fit.Ma
Job Complete!
In the interest of our environment please dispose
of all packaging thoughtfully.