fantastic furniture Lean User manual

Version 1.0
Lean
Bookcase Corner
fantasticfurniture.com.au

Secure it!
Wall attachment guide
(with available wood stud)
Screw directly into
stud.
Please seek professional advice if you are in doubt of what fixing device to use.
•
•
• Do not
•
•
Reduce the risk of furniture
tip-over accidents
(with available wood stud)
S
.
S crew
fantasticfurniture.com.aufantasticfurniture.com.au
Recommended Weight Capacity :10kg/shelf

fantasticfurniture.com.au Page 3
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 4
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Leg
(P1)
Leg
(P3)
Leg
(P2) Leg
(P4)
Shelf Panel
(P6)
Shelf Panel
(P7)
Shelf Panel
(P8)
Parts list
Leg (P1); Leg (P2);
Leg (P3); Leg (P4);
Shelf Panel (P5);
Shelf Panel (P6);
Shelf Panel (P7);
Shelf Panel (P8);
Shelf Panel (P9);
Hardware pack
Shelf Panel
(P5)
Shelf Panel
(P9)
15 x Cam Bolts
(H2)
15 x Cam Nuts
(H3)
4 x Long Screws
(H5)
5 x Screws
(H4)
6 x Dowels
(H1)
3 x Plastic
Glides
(H6)
1 x Safety
Strap
(H7)
1 x Washer
(H8)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Flat head screwdriver;
Hammer
DO NOT USE
Page 5
fantasticfurniture.com.au

You will need
Step 1
Step 2
2 x Cam Bolts
(H2)
2 x Cam Nuts
(H3)
You will need
Flat head
screwdriver
Phillips head
screwdriver
Ĝ
h
H2
H2
H2
(P2)
(P1)
(P4)
(P3)
H5
H5
H5
H5
4 x Long
Screws (H5)
Phillips head
screwdriver
2 x Dowels
(H1)
H1
H1
(P1)
(P9)
(P2) H3
H3
Insert 2 x Dowels (H1) into Legs (P1, P3) as shown.
Attach Leg (P2) to Leg (P1) and Leg (P4) to Leg (P3) with 4 x Long Screws (H5)
using a Phillips head screwdriver.
Ensure slot in nut is
facing in-coming bolt.
Insert 2 x Cam Nuts (H3) into the holes on Shelf Panel (P9),
make sure the opening is facing incoming cam bolts.
Push 2 x Cam Bolts (H2) through Legs (P1, P2), and attach with Shelf Panel (P9)
securely with 2 x Cam Nuts (H3) using a Flat head screwdriver.
Tighten with Phillips head screwdriver.
countersink hole
on outside
H3
Page 6
fantasticfurniture.com.au

You will need
Step 3
Step 4
8 x Cam Bolts
(H2)
8 x Cam Nuts
(H3)
You will need
Flat head
screwdriver
Phillips head
screwdriver
H2
H2
H2
H2
H2 H2
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
(P1) (P5)
(P6)
(P7)
(P8)
(P2)
5 x Screws
(H4)
Phillips head
screwdriver
4 x Dowels
(H1)
Insert 4 x Dowels (H1) into Leg (P4) as shown.
Attach Leg (P2) and 1 x Safety Strap (H7) to Leg (P4) with 5 x Screws (H4).
Tighten the screws with Phillips head screwdriver.
Ĝ
h
Ensure slot in nut is
facing in-coming bolt.
Insert 8 x Cam Nuts (H3) into the holes on Shelf Panels (P5, P6, P7, P8),
make sure the opening is facing incoming cam bolts.
Push 8 x Cam Bolts (H2) through Legs (P1, P2), and attach with Shelf Panels (P5, P6, P7, P8)
securely with 8 x Cam Nuts (H3) using a Flat head screwdriver.
Tighten with Phillips head screwdriver.
H2
H3
H7
We strongly advise that you use
the wall safety strap provided to
prevent the unit toppling
1 x Safety
Strap (H7)
(P2)
(P4)
H1
H4
H4
H4
H4
H4
H1
H1
H1
H4
H7
Page 7
fantasticfurniture.com.au

(P3)
(P5)
(P6)
(P7)
(P8)
(P9)
You will need
Step 5
5 x Cam Bolts
(H2)
5 x Cam Nuts
(H3)
Flat head
screwdriver
Phillips head
screwdriver H3
H2
H2
H2
H3
H3
H3
H3
H2
H2
Ĝ
h
Ensure slot in nut is
facing in-coming bolt.
Carefully turn the frame over.
Insert 5 x Cam Nuts (H3) into the holes on Shelf Panels (P5, P6, P7, P8, P9),
make sure the opening is facing incoming cam bolts.
Push 5 x Cam Bolts (H2) through Leg (P3), and attach with Shelf Panels (P5, P6, P7, P8, P9)
securely with 5 x Cam Nuts (H3) using a Flat head screwdriver.
Tighten with Phillips head screwdriver.
You will need
3 x Plastic
Glides (H6) Hammer
Step 6
H6
H6
H6
Attach 3 x Plastic Glides (H6) to the bottom of Legs (P1, P2, P3) with a Hammer.
(P2)
(P1)
(P3)
H3
H2
Page 8
fantasticfurniture.com.au

You will need
Step 7
H8
Phillips head
screwdriver
1 x Washer
(H8)
Move the bookcase to the final position, and attach the safety strap to the wall securely.
Make sure it is firmly attached and snug fit.
Page 9
fantasticfurniture.com.au
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
Screw and Wall Plug are not
provided. Please use
appropriate fixtures for
your wall.