fantastic furniture Havana Bookcase Large Narrow User manual

Version 1.0
Havana
Bookcase Large Narrow
fantasticfurniture.com.au

Secure it!
Wall attachment guide
(with available wood stud)
Screw directly into
stud.
Please seek professional advice if you are in doubt of what fixing device to use.
•
•
• Do not
•
•
Reduce the risk of furniture
tip-over accidents
(with available wood stud)
S
.
Screw
fantasticfurniture.com.aufantasticfurniture.com.au
Recommended Weight Capacity :10kg/shelf

fantasticfurniture.com.au Page 3
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 4
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Bottom Panel (P2);
2 x Left Leg (P3);
2 x Right Leg (P4);
5 x Divider Panels (P5);
2 x Shelf Middle Panels (P6);
2 x Shelf Top Panel (P7);
2 x Shelf Bottom Panel (P8);
2 x Small Shelf Panel (P9);
Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 5
DO NOT USE
fantasticfurniture.com.au
72 x Dowels
(H1)
4 x Bolts
(H2)
34 x Cam Bolts
(H3)
34 x Cam Nuts
(H4)
12 x Screws
(H5)
1 x Allen key
(H6)
4 x Plastic Glide
(H7)
4 x Bracket
(H8)
1 x Safety
Strap
(H9)
9 x Screw
(H10)
2 x Washers
(H11)
2 x Large Screws
(H12)
Top Panel (P1)
Bottom Panel
(P2)
Divider
Panel
(P5)
Shelf Top
Panel (P7)
Divider
Panel
(P5)
Left Leg
(P3)
Left Leg
(P3)
Right Leg
(P4)
Right Leg
(P4)
Shelf Bottom
Panel (P8)
Small Shelf
Panel (P9)
Shelf Middle
Panel (P6)
Shelf Middle
Panel
(P6)
Small Shelf
Panel (P9)
Divider
Panel
(P5)
Shelf Top
Panel (P7)
Shelf Bottom
Panel (P8)
Divider
Panel
(P5)
Divider
Panel
(P5)

You will need
Step 1
Phillips Head
Screwdriver
Step 2
You will need
Secure 4 x Cam Bolts (H3) to each Left Leg (P3x2) and 4 x Cam Bolts (H3) to each
Right Leg (P4x2) by tightening Cam Bolts (H3) with a Phillips Head Screwdriver.
16 x Cam Bolts
(H3)
Phillips Head
Screwdriver
2 x Cam Bolts
(H3)
(P1)
H3
H3
H3
(P3)
(P4)
H3
H3
H3
H3
H3
H3
H3
x2
x2
fantasticfurniture.com.au Page 6
Secure 2 x Cam Bolts (H3) to Top Panel (P1) by tightening Cam Bolts (H3) with a
Phillips Head Screwdriver.

You will need
Step 4
You will need
Step 3
Insert 2 x Dowels (H1) into Shelf Top Panel (P7) and attach Divider Panel (P5) with
2 x Screws (H5) by tightening with a Phillips Head Screwdriver. Repeat this step for
the second Shelf Top Panel (P7) and Divider Panel (P5).
Secure 2 x Cam Bolts (H3) to each Shelf Middle Panel (P6x2), 2 x Cam Bolts (H3) to each Shelf
Bottom Panel (P8x2) and 4 x Cam Bolts (H3) to Shelf Top Panel (P7) by tightening Cam Bolts (H3)
with a Phillips Head Screwdriver.
Phillips Head
Screwdriver
Phillips Head
Screwdriver
16 x Cam Bolts
(H3)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 7
4 x Dowels
(H1)
4 x Screws
(H5)
H3
H3
H3
H3
H3
H3
(P8)
(P6)
(P7)
H3
H3
x2
x2
x2
(P5)
(P7)
H1
H1
H5
H5 x2

You will need
Step 5
Insert 4 x Dowels (H1) into Divider Panel (P5) and Shelf Middle Panel (P6),attach to Shelf
Top Panel (P7). Insert 4 x Cam Nuts (H4) into Divider Panel (P5) and Shelf Middle Panel (P6),
make sure the arrow on Cam Nuts is facing incoming Cam Bolt, secure by tightening Cam
Nuts (H4) with a Phillips Head Screwdriver.
Insert 4 x Dowels (H1) into Divider Panel (P5) and Shelf Middle Panel (P6), attach to
Shelf Bottom Panel (P8) and secure with 4 x Screws (H5) by tightening with a Phillips
Head Screwdriver.
Step 6
You will need
Phillips Head
Screwdriver
8 x Dowels
(H1)
8 x Screws
(H5)
fantasticfurniture.com.au Page 8
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Phillips Head
Screwdriver
8 x Cam Nuts
(H4)
8 x Dowels
(H1)
(P7)
(P6)
x2
H1
H1
H1
H1
H4
H4
H4 (P5)
(P6)
(P5)
(P8)
x2
H5
H5
H5
H5
H1
H1
H1

You will need
Step 7
Phillips Head
Screwdriver
Insert 2 x Dowels (H1) into Divider Panel (P5). Attach to Shelf Bottom Panel (P8).
Insert 2 x Cam Nuts (H4) into Divider Panel (P5) and secure by tightening Cam Nuts (H4)
with a Phillips Head Screwdriver.
Insert 4 x Dowels (H1) into Small Shelf Panels (P9x2). Attach to Shelf Middle Panels (P6x2).
Insert 4 x Cam Nuts (H4) into Small Shelf Panels (P9x2) and secure by tightening Cam
Nuts (H4) with a Phillips Head Screwdriver.
fantasticfurniture.com.au Page 9
2 x Cam Nuts
(H4)
2 x Dowels
(H1)
(P8)
(P8)
(P6)
(P5)
(P5)
H1
H4
H4
You will need
Step 8
Phillips Head
Screwdriver
4 x Cam Nuts
(H4)
4 x Dowels
(H1)
(P9)
(P9)
(P6) (P6)
H1 H4
H1
H4
H4
H4
H1
H1

Insert 2 x Dowels (H1) into Divider Panel (P5). Attach to Shelf Bottom Panel (P8).
Insert 2 x Cam Nuts (H4) into Divider Panel (P5) and secure by tightening Cam Nuts (H4)
with a Phillips Head Screwdriver.
You will need
Step 9
Phillips Head
Screwdriver
Insert 2 x Dowels (H1) into Divider Panel (P5), attach to Bottom Panel (P2) and secure
with 2 x Large Screws (H12) by tightening with a Phillips Head Screwdriver.
Step 10
You will need
Phillips Head
Screwdriver
(P8)
(P5)
H1
H1
H4
(P5)
(P2)
H1
H12
H12
fantasticfurniture.com.au Page 10
2 x Dowels
(H1)
2 x Large
Screws (H12)
2 x Cam Nuts
(H4)
2 x Dowels
(H1)

You will need
Step 11
Insert 16 x Dowels (H1) into Shelf Top Panels (P7x2), Shelf Bottom Panels (P8x2), Small
Shelf Panels (P9x2) and Bottom Panel (P2). Attach to Leg (P3,P4). Insert 4 x Cam Nuts (H4)
into Shelf Top Panels (P7), Bottom Panel (P2) and Small Shelf Panels (P9) secure by tightening
Cam Nuts (H4) with a Phillips Head Screwdriver.
Phillips Head
Screwdriver
You will need
Step 12
Phillips Head
Screwdriver
4 x Cam Nuts
(H4)
16 x Dowels
(H1)
(P3)
(P4)
(P9)
(P7)
(P8)
(P9)
(P7)
(P8)
(P2)
H1
H4
H1
H4
12 x Cam Nuts
(H4)
16 x Dowels
(H1)
Carefully turn the unit over,
insert 16 x Dowels (H1) into Shelf Top
Panels (P7x2), Shelf Bottom Panels (P8x2),
Small Shelf Panels (P9x2) and Bottom Panel (P2).
Attach to Leg Panel (P3) and Panel (P4). Insert
12 x Cam Nuts (H4) into Shelf Top Panels (P7x2),
Shelf Bottom Panels (P8x2), Small Shelf Panels (P9x2) and
Bottom Panel (P2) secure by tightening Cam Nuts (H4) with a
Phillips Head Screwdriver.
fantasticfurniture.com.au Page 11
(P3)
(P4)
(P7)
(P7)
(P2)
(P8)
(P8)
(P9)
(P9)
H1
H4
H1
H4

Insert 10 x Dowels (H1) into Legs (P3x2,P4x2)
and Divider Panel (P5). Attach to Top Panel (P1).
Insert 2 x Cam Nuts (H4) into Divider (P5) and
secure by tightening Cam Nuts (H4) with a Phillips
Head Screwdriver and secure with 4 x Bolts (H2) by
tightening with an Allen key (H6).
You will need
Step 13
10 x Dowels
(H1)
4 x Bolts
(H2)
2 x CamNuts
(H4) 1 x Allen key
(H6)
(P1)
(P4)
(P4)
(P3)
(P3)
(P5)
H2
H6
H2
H6
H1
H1
H1
H2
H2
H1
H1
H4
I
(P4)
(P4)
(P3)
(P3)
H7
H7
H7
H7
H8
H10 H10
(P2)
Hammer
Attach 4 x Plastic Glides (H7) to the bottom of each
Left & Right Leg (P3x2&P4x2) by using a hammer to
gently tap into place. Attach 4 x Brackets (H8) to the
corners of Bottom Panel (P2) and each Left & Right Leg (P3x2&P4x2)
with 8 x Screws (H10) by tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au Page 12
You will need
Step 14
8 x Screws
(H10)
4 x Plastic
Glide (H7)
4 x Bracket
(H8)

Secure the Safety Strap (H9)
to the Top Panel (P1) as shown
use 1 x Washer (H11) and secure
by tightening 1 x Screw (H10) with
the Phillips Head Screwdriver.
* We strongly advise that you use
the wall safety strap provided
to prevent the unit toppling.
Move the unit into it’s final position
and then secure the Safety Strap
to the wall. Ensure it is firmly attached.
Screw and wall plug are not provided.
Please use appropriate fixtures for your
wall. * Seek advice from a qualified
tradesperson on how to attach this
safety strap to your specific wall.
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
You will need
Phillips Head
Screwdriver
1 x Safety
Strap (H9)
1 x Screw
(H10)
1 x Washer
(H11)
Step 15
(P1)
H9
H10
H11
You will need
Step 16
Phillips Head
Screwdriver
1 x Washer
(H11)
H11
wall
Wall Screw
Screw and Wall Plug are not
provided. Please use
appropriate fixtures for
your wall.
fantasticfurniture.com.au Page 13