fantastic furniture HAVANA User manual

Version 1.0
HAVANA
Bedside 2 Drawer
www.fantasticfurniture.com.au

Enjoy
Your purchase from
Australia’s Best Value Furniture Store
www.fantasticfurniture.com.au PAGE 2

Assembly checklist
Useful Information
www.fantasticfurniture.com.au PAGE 3
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.

Top Panel
(P1)
Right Side
Panel
(P3)
Left Side
Panel
(P2)
Rail
(P4)
Back Panel
(P6)
18 x Cam Bolts
(H3)
18 x Cam Nuts
(H4)
Parts list
Box 1: Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Rail (P4); Rail (P5);
Back Panel (P6);
LF Leg (P7); RF Leg (P8);
LR Leg (P9); RR Leg (P10);
2 x Drawer Front (P11);
2 x Left Drawer Side (P12);
2 x Right Drawer Side (P13);
2 x Drawer Base (P14);
2 x Drawer Back (P15);
www.fantasticfurniture.com.au PAGE 4
20 x Small
Screws
(H5)
Rail
(P5)
8 x Small
Cam Nuts
(H11)
8 x Small
Cam Bolts
(H10)
What you need
to assemble the product
Additional Tools Required
Flat head screwdriver;
Phillips head screwdriver;
Hammer
DO NOT USE
B
Left
Drawer Side
(P12)
Right
Drawer Side
(P13)
Drawer Back
(P15)
Drawer
Base
(P14) Drawer
Front
(P11)
x 2
2 x CL Runner
Tracks
(H6)
4 x Plastic
Glides
(H2)
4 x Round
Head Bolts
(H14)
2 x CR Runner
Tracks
(H7)
2 x Handles
(H13)
2 x DR Runners
(H9)
2 x DL Runners
(H8)
LR
Leg
(P9)
RR
Leg
(P10)
RF Leg
(P8)
LF Leg
(P7)
LF: Left Front
LR: Left Rear
RF: Right Front
RR: Right Rear
8 x Long
Screws
(H12)
20 x Dowels
(H1)
Hardware pack
4 x Wedges
(H15)
4 x Screws
(H16)

www.fantasticfurniture.com.au PAGE 5
Attach 8 x Cam Bolts (H3) into Legs (P7, P8, P9, P10).
You will need
Step 1
You will need
Step 2
(P3)
(P7) (P9)
(P10)
(P8)
8 x Cam Bolts
(H3)
Phillips head
screwdriver
(P2)
H4
H4
H1
H1
H1
H1
H4
H4
You will need
Step 3
Insert 4 x Dowels (H1) into the holes of Left Side Panel (P2).
Insert 4 x Cam Nuts (H4) into the holes of Left Side Panel (P2).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Legs (P7, P9) to Left Side Panel (P2), then tighten the cam nuts.
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P7)
(P9)
H4
H4
H4
H4
(P10)
(P8)
Insert 4 x Dowels (H1) into the holes of Right Side Panel (P3).
Insert 4 x Cam Nuts (H4) into the holes of Right Side Panel (P3).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Legs (P8, P10) to Right Side Panel (P3), then tighten the cam nuts.
H3
H3
H3
H3
H3
H3
H3
H3
4 x Cam Nuts
(H4)
Flat head
screwdriver
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
Flat head
screwdriver
4 x Dowels
(H1)
H1
H1
H1
H1

www.fantasticfurniture.com.au PAGE 6
Attach 4 x Cam Bolts (H3) into Side Panels (P2, P3) and Legs (P7, P8, P9, P10).
Attach 2 x CL Runner Tracks (H6) to Left Side Panel (P2) with 6 x Small Screws (H5).
Attach 2 x CR Runner Tracks (H7) to Right Side Panel (P3) with 6 x Small Screws (H5).
H7
CR
H5
Step 6
You will need
4 x Cam Bolts
(H3)
Phillips head
screwdriver
2 x CL Runner
Tracks (H6)
You will need
Step 4
6 x Small
Screws (H5)
Phillips head
screwdriver
You will need
Step 5
6 x Small
Screws (H5)
Phillips head
screwdriver
2 x CR Runner
Tracks (H7)
H6
CL
H5
H5
H5
H5
H5
H5
H5
H6
H6
H5
H5
H5
H5
H5
H5
H7
H7
H3
H3
H3
H3
(P2)
(P3)
(P2)
(P3)
(P7)
(P9) (P10)
(P8)
(P7)
(P9)
(P10)
(P8)

Insert 2 x Dowels (H1) into Rails (P4, P5).
Insert 2 x Cam Nuts (H4) into the holes of Rails (P4, P5).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Align the holes and attach Legs (P8, P10) to Right Side Panel (P3).
Tighten the cam nuts.
Insert 2 x Dowels (H1) into Rails (P4, P5).
Insert 2 x Cam Nuts (H4) into the holes of Rails (P4, P5).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Align the holes and attach Legs (P7, P9) to Left Side Panel (P2).
Tighten the cam nuts.
www.fantasticfurniture.com.au PAGE 7
You will need
Step 7
2 x Cam Nuts
(H4)
You will need
Flat head
screwdriver
Step 8
2 x Dowels
(H1)
2 x Cam Nuts
(H4)
Flat head
screwdriver
2 x Dowels
(H1)
H4
(P5)
(P4)
(P2)
(P7)
(P9)
H4
(P3)
(P5)
(P4)
H4
H1
H1
H4
(P2)
H1
H1
(P10)
(P8)

www.fantasticfurniture.com.au PAGE 8
Slide Back Panel (P6) into the groove in Legs (P9, P10) and Rail (P5).
Insert 8 x Dowels (H1) into Side Panels (P2, P3) and Legs (P7, P8, P9, P10).
Attach 6 x Cam Bolts (H3) into Top Panel (P1) as shown.
6 x Cam Bolts
(H3)
Phillips head
screwdriver
You will need
(P6)
Step 11
(P9)
(P8)
(P3)
(P2)
You will need
4 x Plastic
Glides (H2) Hammer
Step 9
Attach 4 x Plastic Glides (H2) to the bottom of Legs (P7, P8, P9, P10) with a Hammer.
H3
(P1)
H3
H3
H3
H3
H3
H2
H2
H2
H2
H1
H1
H1
H1
H1 H1
H1
H1
You will need
Step 10
8 x Dowels
(H1)
(P7)
(P9)
(P8)
(P10)

6 x Cam Nuts
(H4)
You will need
Step 12
Flat head
screwdriver
www.fantasticfurniture.com.au PAGE 9
Insert 6 x Cam Nuts (H4) into the holes of Side Panels (P2, P3) and Legs (P7, P8, P9, P10).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P1) to the frame and tighten the cam nuts using a Flat head screwdriver.
H4
H4
H4
H4
(P1)
(P9) (P8)
H4
Secure Back Panel (P6) in place with 4 x Wedges (H15) using 4 x Screws (H16).
H15
H16
(P6)
You will need
Step 13
4 x Wedges
(H15)
4 x Screws
(H16)
Phillips head
screwdriver

(P11)
H10 H10
H10
H10
Screw 4 x Small Cam Bolts (H10) into Drawer Front (P11) with a Phillips head screwdriver.
Phillips head
screwdriver
4 x Small Cam
Bolts (H10)
You will need
Step 14
(P14)
(P12)
(P12)
(P13)
(P13)
Slide Drawer Base (P14) in through the grooves
on Drawer Sides (P12, P13).
H11
H11
H11
H11
Insert 4 x Small Cam Nuts (H11) into the holes of Drawer Sides (P12, P13).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Align the holes together, secure Drawer Sides (P12, P13) into place and
tighten the cam nuts using a Flat head screwdriver.
You will need
4 x Small Cam
Nuts (H11)
Step 15
Flat head
screwdriver
www.fantasticfurniture.com.au PAGE 10
(P11)
Step 16