fantastic furniture LEAN Bookcase Desk Large Narrow User manual

Version 1.0
REQUIRED
TWO PEOPLE
LEAN
Bookcase Desk Large Narrow
www.fantasticfurniture.com.au

Enjoy
Your purchase from
Australia’s Best Value Furniture Store
www.fantasticfurniture.com.au PAGE 2

Assembly checklist
Useful Information
www.fantasticfurniture.com.au PAGE 3
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.

Left Frame
(P1)
Right Frame
(P2)
Shelf Panel
(P4)
Shelf Panel
(P5)
Rail
(P8)
Rail
(P6)
Rail
(P6)
Rail
(P7) Rail
(P9)
Rail
(P10)
Parts list
Box 1: Left Frame (P1);
Right Frame (P2);
Shelf Panel (P3);
Shelf Panel (P4);
Shelf Panel (P5);
2 x Rails (P6);
Rail (P7); Rail (P8);
Rail (P9); Rail (P10);
www.fantasticfurniture.com.au PAGE 4
Hardware pack
Shelf Panel
(P3)
14 x Small Dowels
(H1)
14 x Long Bolts
(Ø6 x 55mm)
(H4)
14 x Nuts
(H5)
2 x Long Screws
(H6)
4 x Dowels
(H2)
4 x Bolts
(Ø6 x 35mm)
(H3)
4 x Cam Bolts
(H7)
4 x Cam Nuts
(H8)
What you need
to assemble the product
Additional Tools Required
Flat head screwdriver;
Phillips head screwdriver;
Hammer
DO NOT USE
4 x Plastic
Glides
(H9)
2 x Brackets
(H10)
2 x Screws
(H11)
4 x Washers
(H12)

www.fantasticfurniture.com.au PAGE 5
You will need
Step 1
Step 3
You will need
Phillips head
screwdriver
4 x Small
Dowels (H1)
2 x Long
Screws (H6)
4 x Cam Bolts
(H7)
Phillips head
screwdriver
You will need
Step 2
4 x Cam Nuts
(H8)
Flat head
screwdriver
4 x Dowels
(H2)
H6
(P5)
(P3) (P4)
(P6)
(P6)
(P8)
(P7)
(P7)
(P8)
H7
H7
H7
H7
H8
H8
H8
H8
H2
H2
H2
H2
H1
H1
H1
H1
Insert 4 x Dowels (H2) into Shelf Panel (P5).
Insert 4 x Cam Nuts (H8) into the holes of Shelf Panel (P5).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Rails (P7, P8) to Shelf Panel (P5), then tighten the cam nuts using a Flat head screwdriver.
Attach 4 x Cam Bolts (H7) into Rails (P7, P8) with a Phillips head screwdriver.
Insert 4 x Small Dowels (H1) into Shelf Panels (P3, P4).
Attach Rails (P6) to Shelf Panels (P3, P4) with 2 x Long Screws (H6).
Tighten Screws using a Phillips head screwdriver.
H6
Rounded
corner
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.

www.fantasticfurniture.com.au PAGE 6
You will need
Step 4
2 x Bolts
(H3)
Phillips head
screwdriver
(P1)
(P7)
H3
H3
Attach Left Frame (P1) to Rail (P7) with 2 x Bolts (H3) using a Phillips head screwdriver.
You will need
Step 5
4 x Small
Dowels (H1)
(P1)
(P6)
H1
H1
H1
H1
Insert 4 x Small Dowels (H1) into Rails (P6).
Attach Shelf Panels (P3, P4) to Left Frame (P1) securely.
countersink hole on
outside of shelf frame

h
Ĝ
Ensure slot in nut is
facing in-coming bolt.
www.fantasticfurniture.com.au PAGE 7
You will need
Step 6
1 x Small
Dowel (H1)
You will need
Step 7
H4
H4
H4
3 x Long
Bolts (H4)
3 x Nuts
(H5)
Flat head
screwdriver
Phillips head
screwdriver
(P9)
(P1)
(P10)
H1
Carefully turn the frame over.
Insert 1 x Small Dowel (H1) into Rail (P9).
Push 3 x Long Bolts (H4) through Left Frame (P1), and attach with
Rails (P9, P10) securely with 3 x Nuts (H5) using a Flat head screwdriver.
Tighten the bolts with Phillips head screwdriver.
H5
H5
4 x Long
Bolts (H4)
4 x Nuts
(H5)
Flat head
screwdriver
Phillips head
screwdriver
(P1)
(P3) (P4)
Push 4 x Long Bolts (H4) through Left Frame (P1), and connect with
Shelf Panels (P3, P4) with 4 x Nuts (H5) using a Flat head screwdriver.
Tighten the bolts with Phillips head screwdriver.
H5
H5
H4
H4
H4
H4
(P3)
H5
H4
H4

5 x Small
Dowels (H1)
You will need
Step 8
You will need
Step 9
REQUIRED
TWO PEOPLE
www.fantasticfurniture.com.au PAGE 8
7 x Long
Bolts (H4)
2 x
Bolts
(H3)
7 x Nuts
(H5)
Flat head
screwdriver
Phillips head
screwdriver
Phillips head
screwdriver
Push 7 x Long Bolts (H4) through Right Frame (P2) attach with Shelf Panels (P3, P4)
and Rails (P9, P10) with 7 x Nuts (H5) using a Flat head screwdriver.
Tighten the bolts with Phillips head screwdriver.
(P9)
(P6)
(P6)
(P8)
H3
H3
(P9)
(P2)
(P2)
(P4)
(P3)
(P10)
Carefully turn the frame over.
Insert 5 x Small Dowels (H1) into Rails (P6, P9).
Attach Right Frame (P2) to Rail (P8) with 2 x Bolts (H3) using a Phillips head screwdriver.
H4
H4 H4
H4
H4
H1
H1
H1
H5
H5
H5
H5
H5
H1 H1

(P1)
(P1)
(P2)
(P2)
You will need
Step 10
www.fantasticfurniture.com.au PAGE 9
4 x Plastic
Glides (H9) Hammer
H9
H9
H9
H9
Carefully turn the frame over.
Attach 4 x Plastic Glides (H9) to the bottom of Frames (P1, P2) with a Hammer.
You will need
Step 11
Phillips head
screwdriver
2 x Brackets
(H10)
2 x Screws
(H11)
H10
H11
H12
Attach 2 x Brackets (H10) to the top of Frames (P1, P2) with 2 x Screws (H11),
Tighten the screws with Phillips head screwdriver.
2 x Washers
(H12)

H12
www.fantasticfurniture.com.au PAGE 10
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
Recommended weight capacity for each shelf : 10KG.
Screw
Wall
Move the bookcase to the final position, and attach the brackets to the wall securely.
Make sure it is firmly attached and snug fit.
Phillips head
screwdriver
You will need
Step 12
2 x Washers
(H12)