fantastic furniture Bridge Buffet 3 Door Mk2 Oak User manual

Bridge
Buffet 3 Door Mk2 Oak

r

2x
Top(P1)
Bottom(P2)
Right Panel(P3)
Left Panel(P4)
Middle Panel(P5)
Long Support(P6)
Short Support(P7)
Long Shelf(P8)
Short Shelf(P9)
2 x Long Back Panels(P10)
Short Back Panel(P11)
Left Door(P12)
2 x Right Door(P13)
2 x Connector(P14)
2 x Legs(P15)
Hardware Pack
20 x Cam Bolts
(H1)
20 x Cam Nuts
(H2)
24 x Dowels
(H3)
6 x Hinges
(H4)
48 x Short Screws
(H5)
16 x Washers
(H7)
8 x Bolts
(H8)
1 x Allen Key
(H9)
4 x Levelling Feet
(H10)
12 x Wedges
(H11)
1 x Long Screw
(H12)
1 x Support Leg
(H13)
2 x Bolts
(H14)
2 x Dowels
(H15)
2 x Washers
(H16)
1 x Wall Strap
(H17)
2x
Connector
(P14)
4 x Bolts
(H6)
4 x Bolts
(H18)
Leg
(P15)

2 x Bolts
(H14)
1 x Allen Key
(H9)
Using 2 x Bolts(H14) secure the Support Leg(H13) to the Unit Bottom(P2)
by tightening with Allen Key(H9).
1 x Support Leg
(H13)
9
8 x Washers
(H7)
8 x Bolts
(H8)
1 x Allen Key
(H9)
4 x Levelling Feet
(H10)
H 8 P15
Use 8 x Bolts(H8) and 8 x Washers(H7) to secure the Leg(P15) to Bottom(P2).
Tighten with Allen Key (H9), do not tighten fully.
Screw in 4 x Levelling Feet(H10) to the bottom of the 2 x Legs(P15).
Ensure they are secure, and if required can be adjusted accordingly.
H 7
H 9

6 x Cam Bolts
(H1)
6 x Dowels
(H3)
Phillips Head
Screwdriver
Insert 6 x Dowels(H3) into Unit Bottom(P2) and secure 6 x Cam Bolts(H1)
to Unit Bottom(P2) by tightening with the Phillips Head Screwdriver.
(P2)
8 x Washers
(H7)
1 x Allen Key
(H9)
H 6
P 1 5
4 x Bolts
(H6)
4 x Bolts
(H18)
H 1 8
H18
H18
H18
H 7
H 7
H 7
H 7
Align the 2 x Connectors(P14) onto the Bottom(P2) as shown.
Use 4 x Bolts(H6) and 4 x Washers(H7) to secure the 2 x Connectors(P14) to the
Leg(P15) and Bottom(P2). Tighten with Allen Key(H9), also tighten other screws fully.

Phillips Head
Screwdriver
2 x Cam Nuts
(H2)
Insert 2 x Cam Nuts(H2) into Short Shelf(P9) as shown.Rotate the cam nuts
so the arrows point towards the incoming cam bolts.
Attach Short Shelf(P9) to Right Panel(P3) by tightening the cam nuts(H2)
with the Phillips Head Screwdriver
(P3)
Phillips Head
Screwdriver
8 x Dowels
(H3)
8 x Cam Bolts
(H1)
Insert 2 x Dowels(H3) into Right Panel(P3) and secure 2 x Cam Bolts(H1)
to Right Panel(P3) by tightening with the Phillips Head Screwdriver.
Repeat previous step for Left Panel (P4)
Insert 2 x Dowels(H3) into Middle Panel(P5) and secure 2 x Cam Bolts(H1)
to Middle Panel(P5) by tightening with the Phillips Head Screwdriver,
Then turn over, repeat previous step for another side of Middle Panel(P5)
(P3)
(P4)
(P5)
(P5)

Page 8
7
8
2 x Cam Nuts
(H2)
Phillips Head
Screwdriver
Insert 2 x Dowels(H15) into Middle Panel(P5)
Insert 2 x Cam Nuts(H2) into Short Shelf(P9) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Short Shelf(P9) to Middle Panel(P5) by tightening the Cam Nuts(H2)
with the Phillips Head Screwdriver
2 x Dowels
(H15)
（P7)
(P9)
H15
(P5)
2 x Dowels
(H3)
Insert 2 x Dowels(H3)into Right Panel(P3) and connect Short Support(P7)
to Right Panel(P3).
(P3）

Page 9
9
10
2 x Cam Nuts
(H2)
2 x Dowels
(H3)
Phillips Head
Screwdriver
Connect Long Support(P6) to Middle Panel(P5) by Dowels(H15).
Insert 2 x Dowels(H3) into Left Panel(P4) to connect with Long Support(P6).
Insert 4 x Cam Nuts(H2) into Long Shelf(P8) as shown. Rotate the cam nuts
so the arrows point towards the incoming cam bolts.
Attach Long Shelf(P8) to Left Panel(P4) by tightening the Cam Nuts(H2)
with the Phillips Head Screwdriver
(H2)
(H3) (P6)
(P8)
2 x Cam Nuts
(H2)
Phillips Head
Screwdriver
Insert 2 x Cam Nuts(H2) into Long Shelf(P8) as shown. Rotate the cam nuts
so the arrows point towards the incoming cam bolts.
Attach Long Shelf(P8) to Middle Panel(P5) by tightening the
Cam Nuts(H2) with the Phillips Head Screwdriver
(P5)

Page 10
11
12
6 x Cam Bolts
(H1)
6 x Dowels
(H3)
Insert 6 x Dowels(H3) into Unit Top(P1) and secure 6 x Cam Bolts(H1) into Unit Top(P1)
by tightening with the Phillips Head Screwdriver.
(P1)
With assistance, carefully turn the buffet upright.
Slide Long Back Panel(P10) into the groove of Left Panel(P4) and Middle Panel(P5)
as shown.
TWO PEOPLE
REQUIRED

Page 11
13
14
With assistance, carefully turn the buffet upside down.
Slide another Long Back Panel(P10) and Short Back Panel(P11)into the groove.
(P11) (P10)
Phillips Head
Screwdriver
6 x Cam Nuts
(H2)
Insert 6 x Cam Nuts(H2) into Panel(P3&P4&P5) as shown.Rotate the
cam nuts so the arrows point towards the incoming cam bolts.
With assistance, attach Top(P1) to Panel(P3&P4&P5) by tightening the Cam Nuts(H2)
with the Phillips Head Screwdriver
TWO PEOPLE
REQUIRED
TWO PEOPLE
REQUIRED

Page 12
15
16
Using 4 x Short Screws(H5) to connect 2 x Hingers(H4) to Right Door(P13)
Adjust the door then tighten all screws with a Phillips Head Screwdriver.
Repeat previous step for Anther Right Door(P13) and Left Door(P12)
6 x Hinges
(H4)
12 x Short Screws
(H5)
Phillips Head
Screwdriver
6 x Cam Nuts
(H2)
Insert 6 x Cam Nuts(H2) into Panel(P3&P4&P5) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
With assistance, attach Bottom(P2) to Panel(P3&P4&P5) by tightening
the Cam Nuts(H2) with the Phillips Head Screwdriver
(P2)
TWO PEOPLE
REQUIRED

24 x Short Bolts
(H5)
Using 8 x Short Screws(H5) to connect Right Door(P13) to
Buffet by tightening with a Phillips head screwdriver.
Repeat previous step for Right Door(P13) and Left Door(P12)
18
Page 13
TWO PEOPLE
REQUIRED
TWO PEOPLE
REQUIRED
17
With assistance, carefully turn the unit upright. Note: Avoid using the centre
support leg as a handle or pivoting point when turning the buffet over

Page 14
19
STEP 19.1
STEP 19.2
STEP 19.3
STEP 19.4

Page 15
20
12 x Wedges
(H11)
12 x Short Screws
(H5)
Phillips Head
Screwdriver
Insert 12 x Wedges(H11) into all corners of the back of the assembled unit as shown.
Secure Wedges(H11) by tightening 12 x Short Screws(H5) with the
Phillips Head Screwdriver.
5
21
16
17
16
17 1
12
1 x Long Screw
(H12)
1 x Washers
(H16)
1 x Wall Strap
(H17)
17
16
12
12
Long
Middle of

Page 16
22
(H16)
16
1 x Washers
(H16)
TWO PEOPLE
REQUIRED
With assistance, move furniture to its final
position,then