fantastic furniture Tivoli Sofa 1 Seater User manual

Tivoli
fantasticfurniture.com.au
Version 1.0
Two People
Required
Sofa 1 Seater

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Page 2

Page 3
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Assembly checklist
Useful information
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for the further assistance.
fantasticfurniture.com.au

What you need
to assemble the product
Page 4
fantasticfurniture.com.au
Sofa 1 Seater
Parts list
Sofa 1 Seater
4 x Legs
(H1)
4 x Bolts
(H2)
4 x Washers
(H3)
1 x Allen Key
(H4)
DO NOT USE
Hardware pack

Step 1
Place each piece on a flat, clean surface as shown
and remove hardware box from the pocket underneath.
Page 5
fantasticfurniture.com.au
Note:
Here is the hardware.

Step 2
Page 6
fantasticfurniture.com.au
4 x Legs
(H1)
(Per piece)
4 x Washers
(H3)
(Per piece)
4 x Bolts
(H2)
(Per piece)
1 x Allen Key
(H4)
(Per piece)
You will need:
Attach 4 x legs (H1) into position as shown with 4 x bolts (H2)
and 4 x washers (H3) using the allen key (H4).
(H1)
(H3)
(H4)
(H2)

Step 3
Sofa 1 Seater
Page 7
fantasticfurniture.com.au
Align the grooves together, and install
the back securely. Push the back piece
down and listen for the click, ensure
the back piece is fully locked into
position.
To take the back piece o, push down the arm rests and then carefully pull the back piece up.

Place your sofa into position.
Job Complete!
In the interest of environment please dispose of
all packaging thoughtfully.
Page 8
fantasticfurniture.com.au
Step 4