fantastic furniture Tivoli User manual

Tivoli
fantasticfurniture.com.au
Version 1.0
Two People
Required
Sofa Bed 3 Seater

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Page 2

Page 3
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Assembly checklist
Useful information
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for the further assistance.
fantasticfurniture.com.au

What you need
to assemble the product
Page 4
fantasticfurniture.com.au
Sofa Bed 3 Seater
Parts list
Sofa Bed 3 Seater
4 x Legs
(H1)
4 x Bolts
(H2)
4 x Washers
(H3)
1 x Allen Key
(H4)
DO NOT USE
Hardware pack

Step 1
Page 5
fantasticfurniture.com.au
Note:
Here is the hardware.
Place each piece on a flat, clean surface as shown
and remove the hardware box.

Step 2
Page 6
fantasticfurniture.com.au
4 x Legs
(H1)
4 x Washers
(H3)
4 x Bolts
(H2)
1 x Allen Key
(H4)
You will need:
Attach 4 x legs (H1) into position as shown with 4 x bolts (H2)
and 4 x washers (H3) with the allen key (H4).
(H3)
(H2)
(H1)
(H4)

Step 3
Place your sofa bed into an upright position, and
Lift the folded back piece into position as shown.
Page 7
fantasticfurniture.com.au
Step 4
To use the sofa bed, cut the plastic bandage on both sides of the folded mechanism.
Under the sofa seat.
Take out the foam blocks from both sides of the sofa base.

Step 5
Page 8
fantasticfurniture.com.au
To use the sofa bed, remove the seat cushions and pull up the folded mechanism.
Set the sofa bed into position.
Job Complete!
In the interest of environment please dispose of
all packaging thoughtfully.