fantastic furniture NIVA Desk 1 Drawer User manual

Desk 1 Drawer
fantasticfurniture.com.au
Version 1.0
NIVA
Required
Two People

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
Page 2
Love it? Share it!
Fantastic buy! Share how it looks at home for your
chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love
Weight capacity: 60kgs

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

fantasticfurniture.com.au
Page 4
What you need
to assemble the product
Part list
Box 1: Table Top (P1); 4 x Legs (P2); Hardware Pack
Hardware Pack
4 x Dowels
(H1)
8 x Bolts
(H2)
8 x Spring Washers
(H3)
8 x Flat Washers
(H4)
1 x Allen Key
(H5)
4 x Felt Pads
(H6)
Leg (P2)
Table Top (P1)
Leg (P2) Leg (P2)
Leg (P2)

Step 1
Page 5fantasticfurniture.com.au
You will need
4 x Dowels
(H1)
Step 2
4 x Felt Pads
(H6)
You will need
8 x Bolts
(H2)
8 x Flat
Washers (H4)
8 x Spring
Washers (H3)
1 x Allen Key
(H5)
Peel o the backing to expose the adhesive side and then apply 1 x Felt Pad (H6) to
the bottom of each Leg (P2x4).
Insert 1 x Dowel (H1) into the top of each Leg (P2x4).
H1
(P2)
Secure Leg (P2) to Table Top (P1)
as shown with 2 x Flat Washers (H4),
2 x Spring Washers (H3) and 2 x Bolts (H2)
by tightening with the Allen Key (H5).
Repeat steps for the remaining Legs (P2x3).
Once all legs are secured, carefully turn the desk over into the upright position.
(P2)
(P2)
(P2)
(P2)
(P2)
(P2)
(P1)
(P1)
(P1)
H5
H4
H3
H2
X4

Page 6fantasticfurniture.com.au
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.