fantastic furniture VERONA LOWLINE User manual

1.0
VERONA
BOOKCASE LOWLINE
LARGE WHITE

35

Other tool you need:
Phillips head Screwdriver
Box 1:
Shelf Panel (P1) x1 ;Top Panel (P2) x1;Bottom Panel(P3) x1
Side Panel(P4) x2;Divider Panel(P5) x2;Back Panel(P6) x2;
Feet(P7)x4
(P1)
(P2)
(P3)
(P4)
(P5)
(P5)
(P6)
(P6)
8 x Long Bolts (H8)
1 x Allen Key A
(H6)
12 x Cam Nut
(H2)
12 x Dowels
(H3)
6 x Washers
(H4)
4 x Bolts
(H5)
8 x Wedges
(H9)
4 x Felt Protectors
(H14)
12 x Cam Bolts
(H1)
8x Wedge Screws
(H10)
1 x Screw
(H13)
Wall Strap
1 x Wall Strap
(H12)
12 x Adhesive Screw
Covers(H11)
1 x Allen Key B
(H7)
(P7) (P7)
(P7) (P7)
(P4)

5
2 x Cam Bolts
(H1)
2 x Dowels
(H3)
2 x Cam Nuts
(H2)
1 x
(H7)
Allen Key B
(P1)
(H1)
(H3)
(H1)
(H3)
(H2)
(H2)
(H8)
(H7)
(P5)
2 x Bolts(H8)
Phillips Head
Screwdriver
Insert 2 x Dowels (H3) into Shelf Panel (P1) and secure 2 x Cam Bolts (H1) to Shelf Panel (P1)
by tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
Insert 2 x Cam Nuts (H2) into first Divider Panel (P5) as shown. Rotate the cam nuts so the arrows point towards
the incoming cam bolts and attach Divider Panel (P5) to Shelf Panel (P1) by tightening
the cam bolts with the Phillips Head Screwdriver. Attach second Divider Panel (P5) to Shelf Panel (P1) using
2 x Bolts (H8) by tightening with Allen Key B (H7)
(P1)
(H8)
(H7)
(H8)

(H2)
Step 3
Step 4
PAGE6
(P4)
(H1)
(H3)
(H1)
(H3)
4 x Cam Bolts
(H1)
4 xDowels (H3)
(P4)
(P4)
(H2) (H2)
(H2)
4 x Cam Nuts
(H2)
Phillips Head
Screwdriver
Phillips Head
Screwdriver
Insert 2 x Dowels (H3) into Side Panel (P4) and secure 2 x Cam Bolts (H1) to Side Panel (P4)
by tightening with the Phillips Head Screwdriver.
Repeat steps for second Side Panel (P4).
Insert 4 x Cam Nuts (H2) into Shelf Panel (P1) as shown. Rotate the cam nuts so the arrows point towards
the incoming cam bolts. Attach Side Panels (P4x2) to Shelf Panel (P1) by tightening the cam bolts with the
Phillips Head Screwdriver.
(P4)x2
(P1)

Step 5
Step 6
PAGE7
Slide Back Panels (P6x2) into the grooves of Sides Panels (P4x2) and Shelf Panel (P1) as shown.
Attach Bottom Panel (P3) to Side Panels (P4x2) and Divider Panel (P5) with 6 x Bolts (H8) by
tightening with Allen Key B (H7).
(P6)
(P6)
1 x
(H7)
Allen Key B 6 x
Bolts(H8)
(H8)
(H8)
(H8)
(H8)
(H8)
(H7)
(P4) (P4)
(P1)
(H8)
(P3)

Step 7
Step 8
PAGE8
(P7)
(H4)
(H5)
(H6) (P7)
(H4)
(H5)
(P7)
(H4)
(H5)
(P7)
(H4)
(H5)
4 x Washers
(H4)
4 x Bolts
(H5)
1 x Allen Key A
(H6)
Attach Feet (P7x4) to Bottom Panel (P3) with 4 x Washers (H4) and 4 x Bolts (H5) by
tightening with the Allen Key A (H6) as shown
(P3)
4 x Felt Protectors
(H14)
Peel the backing off 4 x Felt Protectors (H14) so that the adhesive side is exposed.
Apply 4 x Felt Protectors (H14) to the bottom of Feet (P7x4).
(P3)
(H14)
(H14)
(H14)
(H14)

PAGE9
Step 9
(H2)
(H2)
(H2)
(H2)(H2)
(H2)
Step 10
6 x Cam Nuts
(H2)
Phillips Head
Screwdriver
Insert 6 x Cam Nuts (H2) into Side Panels (P4x2) and Divider Panel (P5) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Top Panel (P2) to
Side Panels (P4x2) and Divider Panel (P5) by tightening the cam bolts with the Phillips Head Screwdriver.
(P4)
(P4)
(P2)
(P5)
(H1)(H3)
6 x Cam Bolts
(H1)
6 x Dowels
(H3)
Phillips Head
Screwdriver
(H1)(H3)
(H1)(H3)
(H1) (H3)
(H1)(H3)
(H1) (H3)
Insert 6 x Dowels (H3) into Top Panel (P2) and secure 6 x Cam Bolts (H1) to Top Panel (P2)
by tightening with the Phillips Head Screwdriver.
(P2)

Step 11
Step 12
12 x Adhesive Screw
Covers(H11)
(H11)
(H11)
PAGE10
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
8 x Wedges
(H9)
8 x Wedge Screws
(H10)
Phillips Head
Screwdriver
Insert 8 x Wedges (H9) into all corners of the back of the assembled unit as shown.
Secure Wedges (H9) by tightening 8 x Wedge Screws (H10) with the Phillips
Head Screwdriver
(H9)
(H10)
(H11)
(H11)
(H11)
(H11)
(H11)
(H11)
(H11)
(H11)
(H11) (H11)
Apply 12 x Adhesive Screw Covers (H11) over the holes of the cam bolts as shown.
(P4)
(P4)
(P5)
(P5)

Step 12
Step 13
PAGE10
1 x Washer
(H4)
1 x Wall Strap
(H12)
1 x
Screw (H13)
Wall Strap
Phillips Head
Screwdriver
(H13)
(H4)
(H12)
Secure the Wall Strap (H12) to Top Panel (P2) as shown with 1 x Washer (H4) and secure
by tightening 1 x Wall Strap Screw (H13) with the Phillips Head Screwdriver.
We strongly advise that you use the wall safety strap provided to prevent the unit toppling
1 x Washer
(H4)
Phillips Head
Screwdriver
Screw and Wall Plug are
not provided.
Please use appropriate
fixtures for your wall.
Seek advice from a
qualified trades person
on how to attach safety
strap to the wall.
H4
(H12)
(H4)
(H13)
Move furniture to its final position, then make sure it is firmly attached and a snug fit.
Connect the end of Wall Strap (H11) to the wall.