fantastic furniture Ashford Bedside 2 Drawer User manual

Version2.0
Ashford
Bedside2Drawer
www.fantasticfurniture.com.au

Enjoy
Yourpurchasefrom
Australia sBest Value FurnitureStore
PAGE2
www.fantasticfurniture.com.au
WARNING: ENSURETHEWALL STRAP ISATTACHEDTO
AVOIDSERIOUSINJURY.
Toavoid anyseriousor fatal injury,thisproducthasbeenprovided witha
wallstraptopreventtoppling.Westronglyrecommendthatthis product is
permanentlyfixedtothewallorothersuitablesurface.Fixing devices are
notincludedsincedifferentsurfacematerialsrequire different attachments.
Pleaseseekprofessionaladviceifyouare indoubtofwhat fixing deviceto
use.

PAGE3
Assemblychecklist
Useful Information
Readthrough theinstructionscarefully
beforeyoubegin. Makesureyouhave alltherequiredtools.
Never use powertoolsunlessinstructed.
Identifyand layout all ofthecomponents
beforeyoubeginassembly. Unless instructed,do notfullytighten screws until the item isfullyassembled.
! Neveruse powertoolsunless specificallyinstructed.They can damage yourcomponentsor
hardwareif used incorrectly.
! The most common mistakes made during assemblyareusing the wrong hardwareorgetting
componentsback tofront.
! Always use asoft surface (such as carpet orcardboard)when assembling yourproduct to
avoidscratching ordamaging the surface of the product.
! Bulky itemssuch as wardrobes and bunk bed shouldbe assembled inthe roomthey will be
used inas they may not fit through adooronce assembled.
! Neveruse any glue until you arecertainthat the partsbelong together.
! Periodicallycheck and re-tighten all fasteners. Check the product carelabel orwebsitefor
product careinstructions.
! If you arehaving any difficulties assembling yourproduct, missing any hardwareor
componentsplease visit ourwebsiteHelpCentreforfurtherassistance.

PAGE4
What youNeed
o Assemble the Product
www.fantasticfurniture.com.au
Pleasemakesureyouhaveallthesepartsbeforeyou start.
10 xCam Bolts
(H1) 4xScrews
(H7)
(Other ToolsYouneed)
PhillipsHeadScrewdriver
Mallet
X2
1xWallstrap
(H15)
Part LIst
Box 1:
Top Panel(P1), Left
SIde(P2),Right
Side(P3),Back
SupportRail(P4),
FrontSupport
Rail(P5),Front
Plinth(P6),2xSide
Plinth(P7),2xDrawer
Front(P8),4xDrawer
Side(P9),2xDrawer
Back(P10),2xDrawer
Base(P11)

You will need:
PAGE5
www.fantasticfurniture.com.au
You will need:
6x Cam bolts
(H1)
4x Wooden
Dowels
(H3)
x6
x2
Fix6xCam Bolts(H1)toTopPanel(P1)by using aPhillipsheadscrewdriver.
InsertDowels(H3)toBackSuportRail(P4)andFront Suport Rail(P5).
Phillipshead
screwdriver
Mallet
Step 2
Step 1

www.fantasticfurniture.com.au
You will need:
2x CamBolts
(H1)
2x Wooden
Dowels
(H3)
PAGE6
Fix2CamBolts(H1)toLeftSide(P2)usingaPhillips head screwdriver.
Insert 2xWoodenDowels(H3)intoLeft Side(P2).
Fix2LeftRunnerTrack(H11)toLeftSide(P2)byusing6SmallWood Screw(H9) and aPhillips
headscrewdriver.
2x Left
Runner Track
(H11)
6xSmall
WoodScrews
(H9)
You will need:
2x Cam bolts
(H1)
2x Right
Runner Track
(H12)
x2
x6
2x Wooden
Dowels
(H3)
Fix2CamBolts(H1)toRightSide(P3)byusingaPhillips head screwdriver.
Insert 2xWoodenDowels(H3)intoRight Side(P3).
Fix2RightRunnerTrack(H12)toRightSide(P3)byusing6Small Wood Screw(H9)
and aPhillipsheadscrewdriver.
Phillipshead
screwdriver
Phillipshead
screwdriver
Mallet
Mallet
6xSmall
WoodScrews
(H9)
Step 4
Step 3

www.fantasticfurniture.com.au
You will need:
3x Large
WoodScrew
(H4)
You will need:
3x Large
WoodScrew
(H4)
PAGE7
AttachSidePlinth(P7)toRightSide(P3)byusing3Large Wood Screws(H4) and a
Philipheadscrewdriver.
AttachSidePlinth(P7)toLeftSide(P2)byusing3LargeWood Screws(H4) and aPhilip
headscrewdriver.
Phillipshead
screwdriver
Phillipshead
screwdriver
Notetheposition
of bevellededge
Notetheposition
of bevellededge
Step 6
Step 5

You will need:
www.fantasticfurniture.com.au PAGE8
You will need:
3x Large
WoodScrew
(H4) x3
1x Cam
Nut
(H2)
AttachFrontSuportRail(P5)toFrontPlinth(P6)byusing3Large Wood Screws(H4)
and aPhilipheadscrewdriver.
AttachFrontPlinth(P6)andFrontSuportRail(P5)toLeftSide(P2),insert Cam Nut (H2)
intoRail(P5),rotatetheCamNutssothearrowpointtowardsthe incoming cam bolt,
turnclockwisetolock.
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
Phillipshead
screwdriver
Phillipshead
screwdriver
Notetheposition
of bevellededge
Step 8
Step 7

www.fantasticfurniture.com.au
You will need:
1x Cam
Nut
(H2)
You will need:
2x Cam
Nuts
(H2)
PAGE9
AttachBackSuportRail(P4)toLeftSide(P2),insertCamNut(H2)intoRail (P4), rotate
theCamNutssothearrowpointtowardstheincomingcambolt, turnclockwise tolock.
AttachRightSide(P3)toBackSuportRail(P4)andFrontSuportRail(P5). insert Cam
Nut(H2)intoRail(P5,P4),rotatetheCamNutssothearrow point towards the
incomingcambolt, turnclockwise tolock.
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
Phillipshead
screwdriver
Phillipshead
screwdriver
Step 10
Step 9

You will need:
Attach TopPanel(P1) tothe unit asshowonpicture.
insertCamNut(H2)intoSidePanels(P2,P3), rotatethe
CamNutssothearrowpointtowardsthe incoming cam
bolt, turnclockwisetolock.
www.fantasticfurniture.com.au PAGE10
6x Cam
Nuts
(H2)
x6
SlipBack Panel(P12) intothe groovesonthe sidepanels.
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
Phillipshead
screwdriver
informativelabel
nearbytop
Step 12
Step 11

www.fantasticfurniture.com.au
InsertBackPanelSuport(H5)to4cornersofthebackpanel, screw withWood Screws(H6).
AttachDrawerSides(P9)toDrawerFront(P8),screwwithWood Screws(H10).
You will need:
4x Back
Panel Suport
(H5)
You will need:
8x Wood
Screws
(H10)
4x Midium
WoodScrew
(H6)
X2
x4
PAGE11
Phillipshead
screwdriver
Phillipshead
screwdriver
Step 14
Step 13

Step 16
www.fantasticfurniture.com.au PAGE12
X2
You will need:
8x Wood
Screws
(H10)
X2
x4
SlipDrawerBase(P11)tothegroovesonDrawerSides(P9). Then put the
FixDrawerBack P10)andDrawerSides(P9)screwwithWood Screws(H10）.
Phillipshead
screwdriver
Step 15
withpaperlamination
face inside

www.fantasticfurniture.com.au
AttachHandle(H8)todrawerscrewwithScrews(H7).
FixLeftRunner(H13)andRightRunner(H14)tothebottom of Drawer Sides(P9)
byusingSmall WoodScrews(H9).
RepeatStep14toStep18toassemblethe other drawer
You will need:
4 x Screws
(H7)
You will need:
2 xHandles
(H8)
X2
X2
x2
12 x Small
WoodScrews
(H9)
2x left
Runner
(H13)
2x Right
Runner
(H14)
PAGE13
Phillipshead
screwdriver
Phillipshead
screwdriver
Step 18
Step 17

Slipthedrawersintothebedside unit.
www.fantasticfurniture.com.au PAGE14
1x Wood
Screws
(H10)
1xWallstrap
(H15)
1x Washer
(H16)
You will need:
Step 20
Step 19
Westrongly advisethat you use
the wall safety strapprovidedto
preventtheunittoppling.
FixWallStrap(H15)tobackoftheTopPanelbyusingWood Screw (H10) and Washer
(H16).

PAGE15
1x Washer
(H16)
You will need:
Phillipshead
screwdriver
Step 21
Seekadvicefromaqualified
tradesperson on how to
attachsafetystrap to
the wall .
MovetheBedsidetothefinal
position. Attachthe safety strap to
the wall.Makesureitisfirmly
attached and asnug fit.
Screw andWallPlug are not
provided.
Pleaseuseappropriatefixtures
for yourwall.
www.fantasticfurniture.com.au

PAGE16
www.fantasticfurniture.com.au