fantastic furniture Lilo User manual

Lilo
Chair 1 Seater
fantasticfurniture.com.au

Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au

Assembly checklist
Useful information
Read through the instructionscarefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3fantasticfurniture.com.au

Parts list
Chair (P1);
What you need
to assemble the product
4 x Legs(P2);
Hardware pack
(P2) (P2) (P2) (P2)
16 x Flat
Washer
(H2)
(H1) (H3)
Page 4fantasticfurniture.com.au
8 x Screws
8 x Bolts
Other tools you need:
Phillips head screwdriver;
1 x Allen Key
(H4)

Page 5fantasticfurniture.com.au
Step 1
You will need
16 x
Flat
Washers
(H2)
4 x Legs
(P2)
4 x Bolts
(H1)
If the bolt can’t be fitted into
the hole well,
please slope the leg until the
bolt can be inserted into the
hole completely as picture
showed, then screw the bolt to
the bottom.
Phillips Head
Screwdriver
1 x Allen Key
(H4)(H3)
8 x Screws
To attach a leg to the chair, first align the leg plate to the holes on
the underside of the chair. Ensure that the leg is facing the correct
way. First attach the leg with 2 x bolts (H1) and 2 x washers (H2) by
tightening with the allen key (H4) as shown. Then fix 2 x screws
(H3) and 2 x washers (H2) through the remaining 2 holes,
tightening with the phillips head screwdriver. Repeat this for the
remaining legs. Ensure to tighten bolts and screws fully.

Page 5fantasticfurniture.com.au
Step 3
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.