fantastic furniture Coda User manual

Version 1.0
Coda
Insert 1 Door Large
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Recommended weight capacity : 5kgs.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips Head Screwdriver;
DO NOT USE
Page 4
fantasticfurniture.com.au
Parts list
Left Side Panel (P1);
Right Side Panel (P2);
Door (P3);
Back Panel (P4);
Bottom Panel (P5);
Left
Side Panel
(P1)
Right
Side Panel
(P2)
Back Panel
(P4)
Bottom Panel
(P5)
Door
(P3)
10 x Dowels
(H1)
1 x Cam Bolt
(H3)
1 x Cam Nut
(H4)
8 x Long
Screws (L30mm)
(H2)
12 x Timber
Screws
(H15)
12 x Small
Screws
(H12)
4 x Screws
(H6)
2 x Hinges
(H8)
2 x Hinges
(H9)
1 x Left Folding
Hinge
(H10)
2 x Magnetic
Catches
(H5)
1 x Right Folding
Hinge
(H11)
2 x Magnetic
Bars
(H7)
4 x Covers
(H14)
2 x Medium
Screws (L20mm)
(H13)

You will need
Step 1
You will need
Step 2
Page 5
fantasticfurniture.com.au
H5
H6
H5
(P1)
(P2)
H6
H6 H6
Phillips Head
Screwdriver
4 x Screws
(H6)
2 x Magnetic
Catches (H5)
Attach 2 x Magnetic Catches (H5) to Side Panels (P1, P2) with 4 x Screws (H6) as shown.
H3
(P4)
1 x Cam Bolt
(H3)
Phillips Head
Screwdriver
Attach 1 x Cam Bolt (H3) into Back Panel (P4) as shown.

Step 4
You will need
You will need
Step 3
Page 6
fantasticfurniture.com.au
Phillips Head
Screwdriver
(P5)
(P4)
H4
H1
H1
1 x Cam Nut
(H4)
2 x Dowels
(H1)
Insert 2 x Dowels (H1) into the holes of Back Panel (P4).
Insert 1 x Cam Nut (H4) into the hole of Bottom Panel (P5).
Rotate the Cam Nut so the arrow point towards the incoming Cam Bolt.
Attach Bottom Panel (P5) to Back Panel (P4), then tighten the Cam Nut using a Phillips Head
Screwdriver.
8 x Dowels
(H1)
(P5)
(P4)
(P1)
(P2)
8 x Long
Screws (H2)
H1
H2
H2
H2
H2
H1
H2
H2
H1
H1
H1 H1
Phillips Head
Screwdriver
Insert 8 x Dowels (H1) into the holes of Back Panel (P4) and Bottom Panel (P5).
Attach Side Panels (P1, P2) to Back Panel (P4) and Bottom Panel (P5)
with 8 x Long Screws (H2) using a Phillips Head Screwdriver.
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.

You will need
Step 5
You will need
Step 6
Page 7
fantasticfurniture.com.au
(P5) (P5)
H15
H8
Attach 2 x Hinges (H8) to Bottom Panel (P5) with 6 x Timber Screws (H15).
Tighten the screws with a Phillips Head Screwdriver.
H15
H8
H15 H15
H8
Make sure the edge of the hinge
is well aligned with bottom panel.
6 x Timber
Screws (H15)
2 x Hinges
(H8)
Phillips Head
Screwdriver
(P3)
(P3)
H7
H12
H7
H12
H15
H9
H15
H9
H15
H15
H9
Make sure the edge of the hinge
is well aligned with door panel.
Attach 2 x Magnetic Bars (H7) to Door (P3) with 2 x Small Screws (H12).
Attach 2 x Hinges (H9) to Door (P3) with 6 x Timber Screws (H15).
Tighten the screws with a Phillips Head Screwdriver.
2 x Small
Screws (H12)
6 x Timber
Screws (H15)
2 x Hinges
(H9)
Phillips Head
Screwdriver
2 x Magnetic
Bars (H7)

You will need
Step 8
You will need
Step 7
Page 8
fantasticfurniture.com.au
(P5)
(P3)
H8
H9
Phillips Head
Screwdriver
Attach Hinges (H9) to Hinges (H8), if they can't connect, loosen the screw indicated a little.
Tighten the screws to connect the hinges on Door (P3) and Bottom Panel (P5).
(P5)
(P3)
(P1)
(P2)
H12
H12
H10
H11
H11
H12
H12
H12
10 x Small
Screws (H12)
Phillips Head
Screwdriver
1 x Left Folding
Hinge (H10)
1 x Right Folding
Hinge (H11)
Attach 1 x Left Folding Hinge (H10) and 1 x Right Folding Hinge (H11) to Side Panels (P1, P2)
with 6 x Small Screws (H12). Then attach the Left Folding Hinge and the Right Folding
Hinge to Door (P3) with 4 x Small Screws (H12).

Step 9
Page 9
fantasticfurniture.com.au
Put the insert cabinet into the bookcase,
make sure the door of insert cabinet is flush with the edge of shelf.

You will need
Step 10
Page 10
fantasticfurniture.com.au
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
H14
H14
H13
H13
Open the door carefully.
Attach the cabinet to the bookcase with 2 x Medium Screws (H13) using a Phillips Head
Screwdriver. If you'd like to adjust the insert cabinet or remove it, please seal the holes
with the Covers (H14).
Phillips Head
Screwdriver
4 x Covers
(H14)
2 x Medium
Screws (H13)

Page 11
fantasticfurniture.com.au
Side panel
Door
The door should
move up a little
projective line of
side panel
Side panel
Door
The door should
move down a little
projective line of
side panel
TO ADJUST YOUR DOORS TO MAKE THE GAPS MORE EVEN (OPTIONAL).
Step 1
Step 2
Step 3
STEP 2a MOVE DOOR IN
STEP 3a MOVE DOOR UP STEP 3b MOVE DOOR DOWN
STEP 2b MOVE DOOR OUT
Open the door
Adjust the door move in or out
a little
Adjust the door move up or down
a little
Loosen the screw indicated a little,
adjust the hinge to right position
(see step 2a & Step 2b),
then tighten the screw.
Loosen or tighten the screw
indicated a little to adjust the
door move up or down a little
(see step 3a & Step 3b)
Push the hinge back a little.
Turn the screw clockwise
a little as shown to
move door up.
Turn the screw
counterclockwise a
little as shown to
move door down.
Pull the hinge forward a little.
too big gap
Side panel
Door
too Small gap
Side panel
Door
Side panel
Bottom panel
Door
Side panel
Bottom
panel
Door
Side panel
Bottom
panel
Door Side panel
Door
Side panel
Door
Side panel
Door
Side panel
Door