fantastic furniture VERONA User manual

1.0
VERONA
BOOKCASE 5 SHELF WHITE

35

1 x Allen Key
(H6)
Other tool you need:
Phillips head Screwdriver
Box 1:
Side Panel (P1) x2 ;Shelf (P2) x4;Top Shelf(P3) x1
Bottom Shelf(P4) x1;Back Panel(P5) x5
Feet(P6)x4
(P1)
(P1)
(P2)
(P2)
(P2)
(P2)
(P3)
(P4)
(P5)
(P5)
(P5)
(P5)
(P5)
24 x Cam Nuts
(H2)
24 x Dowels
(H3)
6 x Washers
(H4)
4 x Bolts
(H5)
20 x Wedges
(H7)
4 x Felt Protectors
(H10)
24 x Cam Bolts
(H1)
(P6)
(P6)
(P6)
(P6)
20 x Wedge Screws
(H8)
1 x Screw
(H11)
Wall Strap
1 x Wall Strap
(H12)
24 x Adhesive Screw
Covers(H9)

Insert 8 x Cam Nuts (H2) into Shelves (P2x4) as shown. Rotate the cam nuts so the arrows
point towards the incoming cam bolts. Attach Shelves (P2x4) to Side Panel (P1) by tightening
the cam bolts with the Phillips Head Screwdriver
5
(H1)
(H1)
(H3)
Insert 8 x Dowels (H3) into Side Panel (P1) and secure 8 x Cam Bolts (H1) to Side Panel (P1)
by tightening with the Phillips Head Screwdriver.
Repeat steps for second Side Panel (P1).
(P1)
(P2)
16 x Dowels
(H3)
16x Cam Bolts
(H1)
(H3)
(H1)
(H1)
(H3)
(H3)
(H1) (H1)
(H1) (H1)
(H3) (H3)
(H3) (H3)
(P1)x2
(H2)
(H2)
(P2)
(H2)
(H2)
(P2)
(H2)
(H2)
(P2)
(H2)
(H2)
Phillips Head
Screwdriver
8 x Cam Nuts
(H2)
Phillips Head
Screwdriver

Step 3
Step 4
PAGE6
Slide 3 x Back Panels (P5) into the grooves of Shelves (P2x4) and Side Panel (P1) as shown.
Ensure the white gloss side of Shelves are facing the front of the bookcase.
(P1)
(P2)(P2)(P2)(P2)
(P5) (P5)(P5)
(P1)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
8 x Cam Nuts
(H2)
Insert 8 x Cam Nuts (H2) into Shelves (P2x4) as shown. Rotate the cam nuts so the arrows
point towards the incoming cam bolts. Attach Shelves (P2x4) to Side Panel (P1) by tightening
the cam bolts with the Phillips Head Screwdriver
(P2)(P2)(P2)(P2)
Phillips Head
Screwdriver

Step 5
Step 6
PAGE7
(P3)
8 x Cam Bolts
(H1)
8 x Dowels
(H3)
Slide 2 x Back Panels (P5) into the grooves of Side Panels (P1x2) and Shelves (P2x2) as shown.
Ensure the white gloss side of Shelves are facing the front of the bookcase.
Insert 4 x Dowels (H3) into Top Panel (P3) and secure 4 x Cam Bolts (H1) to Top Panel (P3)
by tightening with the Phillips Head Screwdriver.Repeat steps for Bottom Panel (P4)
(H1) (H3)
(H1) (H3)
(H1) (H3)
(H1) (H3)
Phillips Head
Screwdriver
(P1)
(P5) (P5)
(P1)
(P2) (P2)
(P4)
(H1) (H3)
(H1) (H3)
(H1) (H3)
(H1) (H3)

Step 7
Step 8
PAGE8
(P3) (P4)
8 x Cam Nuts
(H2)
4 x Washers
(H4)
4 x Bolts
(H5)
1 x Allen Key
(H6)
Attach Feet (P6x4) to Bottom Panel (P4) with 4 x Washers (H4) and 4 x Bolts (H5) by
tightening with the Allen Key (H6) as shown
Insert 8 x Cam Nuts (H3) into Side Panels (P1x2) as shown. Rotate the cam nuts so the
arrows point towards the incoming cam bolts. Attach Top & Bottom Panels (P3&P4) to
Side Panels (P1x2) by tightening the cam bolts with the Phillips Head Screwdriver.
Ensure the Bottom Panel is at the end of the bookcase with holes on the underside of the Shelves.
Top Bottom
(P6)
(P6) (H4)
(H4) (H5)
(H5) (H6)
(P6)
(P6) (H4)
(H4) (H5)
(H5)
Phillips Head
Screwdriver
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(P6) (H4) (H5) (H6)
(P1)
(P1)

Step 9
PAGE9
4 x Felt Protectors
(H10)
(H10)
(H10)
(H10)
(H10)
Step 10
Insert 20 x Wedges (H7) into all corners of the back of the assembled unit as shown.
Secure Wedges (H7) by tightening 20 x Wedge Screws (H8) with the Phillips
Head Screwdriver
Peel the backing off 4 x Felt Protectors (H10) so that the adhesive side is exposed.
Apply 4 x Felt Protectors (H10) to the bottom of Feet (P6x4).
20 x Wedges
(H7)
20 x Wedge Screws
(H8)
(H7)
(H8)
Phillips Head
Screwdriver
(P6)
(P6)
(P6)
(P6)
(H10)
(P6)

PAGE10
Step 11
Apply 24 x Adhesive Screw Covers (H9) over the holes of the Cam Nuts on Side Panels (P1x2) as shown.
24 x Adhesive Screw
Covers(H9)
(H9)
(H9) (H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9) (H9)
(H9)
(H9)
(H9)
(H9)
(P1) (P1)

PAGE11
Step 12
1 x Washer
(H4)
1 x Wall Strap
(H12)
1 x
Screw (H11)
Wall Strap
Phillips Head
Screwdriver
(H12)
(H4)
(H11)
2

PAGE12
Step 13
1 x Washer
(H4)
Phillips Head
Screwdriver
H4
Screw and Wall Plug are
not provided.
Please use appropriate
fixtures for your wall.
Seek advice from a
qualified trades person
on how to attach safety
strap to the wall.
Move furniture to its final position, then make sure it is firmly attached and a snug fit.
Connect the end of Wall Strap (H12) to the wall.