FBII XL-4 User manual

XL-4
Security System
Owners Manual
FBu[{@}
FIRE BURGLARY INSTRUMENTS, [NC
A
.Ql,h.id!.m
“f
mltw.” c-r. .,-. .- ---
www.ealarm.com.my

1. XL -4 Owners Manual
Table of Contents
Introdudion
LCD Keypad Layout
LED Keypad Layout
System Operation
Arming
Stay
Auto- Stay
Instant
Instant-Stay
Bypass
Unbypass
Forced Arming
Group BWass
Group Unbypass
User Code Definition
User Code Deletion
Usarming
Keypad Emergency Condtions
Duress
Qui& Commands
Seting the CIOW~me
Glossa~
Installation Layout
System Testing
Wners Information
Abut the Manufadurer
Limited Warranty
3
4
6
9
10
13
14
15
15
16
17
16
20
21
22
22
25
27
28
29
32
36
38
40
42
43
47
www.ealarm.com.my

2. INTRODUCTION
Congratulations on your decision to protect your home or
business with the XL-4 Securfty System. The system has been
designed with reliability and ease of operation in mind.
Please take afew minutes to review the wntents of ttis
manual, In order to realize the full potential of this sysfem it is
important that you feel @mfotiable with itsoperation. The following
pages will familiarize you with the procedures for operating fhe
XL-4 Security System.
The eystem can be operated from different styles of keypads:
model 7015 LED keypade confining indicator lights or model 7005
LCD mntaining atwo line readout. Please determine the type of
keypads present within your system.
This manual covers the XL-4, XL-4B and XL-4C systems. The
systems differ wifh the following Underwriters app~cations:
XL-4 Household Burglary and Rre
XL-46 Commercial Burgla~
XL-4C Commercial Rre and Burglary
Thank You,
FIRE BURGMRY INSTRUMENTS
OTE: This owners manual contains im~tiant information and i
ot to be removed by anyone but the omupant of the premisa.
XL4 @nem MmualPage3
www.ealarm.com.my

3. LCD KEYPAD LAYOUT
The keypad contains eve~hing necessa~ to operate the
XL-4 Securiy System. The LCD (liquid crystal display) keypad
contains atwo tine by sifleen character Enghsh readout tisplay to
show the current system statue. The keypad appeare aefollowe;
4
1
5
LCD KEYPAD LAYOUT
1- NUMERICAL SECTION
The numerical setion of the keypad operates similar to a
telephone or calculator. The digte 0-9, #and” are clearly marked
and are used to operate the system.
2-AC INDICATOR
This tight inticstes that AC power is connected to the
Security System. The system aleo contains battery backup to
operate the system in the event of a~wer failure.
3- ARWDISARM INDICATOR
This fight indicates whether the system is currently armed
(activated) or tisamed (deactivated). In addtion to ttis mnstati
visual indication, the display area will provide additional
www.ealarm.com.my

information mncerning the current system status, This indicator
will blink when an alarm has occurred,
4- DISPLAY AREA
Two line by sixteen character ~quid crystal display, This
area mntdns the current system status using easy to read English
language descriptions programmed by your installer.
&PULL OPEN DOOR
The front of the keypad contains adoor which pulls open.
Betind tMs door is acard which ~n be filled out to describe the
areas protected (zones) by your Security System.
6- STAY
The STAYkey is used to activate (arm) the system with the
exception of interior protection, This will provide exterior protection
of your location while allowing full access through the premise, This
mode would be used when arming the system and you might be
walking through protected interior zones,
7- BYPASS
The BYPASS key will be used totemporarily turnotf
protection to aportion of your security system, This could be
performed, for example, to ignore an open window w~ch would
prevent the arming of your system. Certain zones such as FIRE
detection zones are always active and cannot be bypassed,
8- INSTANT
The INSTANT key is used to activate (arm) the system and
eliminates the entry time delay, This would cause an immediate
alarm if someone came through an exit/entry zone,
9- CODE
Function key used when entering or changing the User
access codes of your security system.
XL4
tine~ MmualPage
5
www.ealarm.com.my

4. LED KEYPAD OPERATION
The LED based system contains inticator tights to dsplay
the current status of your XL-4 Semrity System. NOTE: The LED
keypad can only be used to display the status of the first sixteen
zones. NOTE: This style of keypad cannot be used with the XL-4C
control panel. The keypad has the following appearance;
*234
9 10,, ,? ,, ,, !, ,6cm,,,
9~~~m 12
/13
8- ~14
LEDK,,,.. LA,.”, \\7
1- ZONE STATUS
The indicator lights marked 1-16 display the current status
of the first sixteen zones connected to your XL-4 Secur~ System
.The hghts show whether any zones are currently in alarm,
bypassad, in trouble, or faukad (not ready) statua.The status of
each zone ie represented as followq
ALARM .Fast Bllnklng
~OUBLE .::::::: .Slow mlee
BVPASSED . . . . . . slow low ifstensw bllnklng
NOT READV .......Solid ON
Each tight will only reflect one oondtion at atime. If azone
contains multiple condtions at the same time the tigheaf priow
status from the a~ve fist will appear.
XL4Wnem MnaualPagee
www.ealarm.com.my

2- LOW BA~ERY
The BAT inticator indicates whether the backup battery
within the system is low.
&STAY
The STAY ~ght will be ON when the system has been
armed in the stay mode which means that the system has been
activated with the exception of interior zones,
4- READY INDICATOR
The light marked RDY shows whether the system is ready
to be armed, Ifthe tight is off then acondition existe within at least
one of the zones preventing system arming.
5- COMMUNICATIONS FAILURE
If the COM light is ON then there has been a
communications error with the Central Station.
6. INSTANT
The lNSindicator will be ONwhenthe system has been
armed in the INSTANT rode. Thie means that the system has
been activated and the entry delay has been eliminated.
7- NUMERICAL SECTION
The numerical section of the keypad operates similar to a
telephone or calculator. The digits 0-9, #and’ are clearly marked
and are used to enter commands to the XL-4 Security System.
8- PULL OPEN DOOR
The front of the keypad contains adoor which pulls open.
Betind this door is acard which can be filled out to describe the
areas protected (zones) of your Security System.
9-AC INDICATOR
This tight indimtes that AC pwer is connected to the
Security System. Battery backup exists to operate the system in
the event of apwer failure.
lG ARWDISARM INDICATOR
Thie fight indicates whether the system is currently ARMED
(ON) or DISARMED (OFF). In addtion to this mnstant visual
indication, the zone indicator Iighta will provide additional
XL<&new Mmual
Page
7
www.ealarm.com.my

information concerning the cument zone status. This hghfwill also
bhnk if there is an alarm condtion present.
11. STAY Key
The STAYkey is used to activate (arm) the system with the
exception of interior protection. This will provide efierior protetion
of your location wtile allowing full access through the location. This
mode would be used when arming the system and you might be
walking through protectad intarior zones.
12- BYPASS Key
The BYPASS key will be used totem~rarily turn off
protection of aWrtion of your burglary protection. This could be
performed, for example, to ignora an open window wtich would
prevent the aming of your system.
1+ INSTANT Key
The INSTANT key is used to activate (arm) tha system and
eliminates the entry delay. This would cause an immediate alarm if
someone came through an extientry zone.
I& CODE Key
Funtion key used when entering or changing the User
accese codes of youraystem.
XL-4@nem Mmual Page8
www.ealarm.com.my

5. SYSTEM OPERATION
Throughout the XL-4 System Wners manual the following
notation will be used to describe action taken at the keypads;
BYPASS Depression of the Function Key labeled BYPASS
INSTANT Depression of the Function Key labeled INSTANT
STAY Depression of the Function Key labeled STAY
CODE Depression of the Function Key labeled CODE
[USER] Entry of your user code (see note below)
*Key labeled’ (located to the left of O)
#Key labeled #(located to the right of O)
+Indicates the simukaneous de ression of two keys.
fFor example, #+3indicates that the # and 3 eys should be
pressed at the same time.
USER CODE NOTE: The [USER] code can selected by
your installer to be either afour or seven digit rode. If a
seven digit user code is selected then the usar code will
be the three digit user number followed by the four digit
user code. For example, if user number 3has acode of
6429 then the seven digit user code would be 0036429.
XL4 hnem Mmual Page9
www.ealarm.com.my

6. ARMING THE SYSTEM
ARMING the system will activate all ~rtions of your
Security System. Arming can only be performed if all zones are
READY. For example, if aprotected door ia open the system
cannot be armed.
=Note: Your installer can program your system to be armed
if certain zones are not ready, Contact your installer to
determine whether this apphes to your system.
SYSTEM READY
LCD BASED KEYPADS
If the system is ready to be armed the following message
will appear in the display area of the LCD keypad;
The second line of the ~spiay can display asystem wide
descriptor (example SMITH RESIDENCE) and may scroll through
other system condtions which are present.
LED BASED KEYPADS
On LED keypads the READY indicator must be ON.
ARMING PROCEDURE
l. Enter your usercode intothe keypad:
[USER]
On LCDkeypadsthe following display appears;
The ARMED in~cator tight will now be ~t (LED and LCD
keypads) and you may exti through adoor designated by your
installer as an extienfry zone for afixed time period known as the
ixti delay. Once the exit time perfod has expired the EXIT NOW
indication will dieappear.
XL4 Wers ManualPage10
www.ealarm.com.my