FBII XL4600RM User manual

XL-2
NOTE Owner’s manual not to be
removed by anyone but the occupant.
Owner’s Manual
FBuui@)
FIRE BURGLARY INSTRUMENTS INC
ASubSdlq ofHttwayCorp.
N9121 5/92 01992, FBX

INTRODUCTION
Congratulations on your decision to protect your ~me or business with the
XL-2 series secufity system. Youhave cbsen arehable, state ofthe artsecur~
sysem that is remarkably easyto operate. Yoursystem has been professionally
installed by your local Security Company who can explain the specfics of your
syafem within your Iowtion.
The keypad is the arming sta~on for your security eystem. These are available
keypade for your syetem:
XL-RM Metal plate keypad mntaini~ iticator [ihte for each of the 12
zones (areas of protection). This keypad can beflush munfad infoyour wall or
surface mounted in aback hx.
XL ~SM Asurface mount keypad wfih 12 LEDs for montiori~ zone status.
W15 Keypad w~h apla%c case and wth indimtor rghts to sbw the status of
each of the zones. The zone indicator Hghteare located behind the plastic
s~ting door of the keypad (left hand skfe). NOTE: TMa keypad Wspiays zone
etafue itioefiin ~ihfs for 16zonas.
=Keypad wkh aplastic caee and atwo ~ie LCD (tiquid c~etal display) with
atwo tine readout.
Please identity the keypad(s) present on your system from the diagrams shown
in the secfiins that follow.
The XL-2 ie the Residential version of the which has been Listed by Utier-
writers Labors!oriee for Houeehold Hre and SuQla~ applications.
me mdel XL-2B isthe timmercial Burgla~ configur#mn of the mntrol panel
and hae been Listed by UndeWnters Laboratories for Comrcial Bu~lary
appKcations,

TABLE OF CONTENTS
1. KEYPAD UYOUT .....................................................................4
2. ARMING ~E SYSTEM .............................................................6
3. DISARMING ..............................................................................7
4. STAY ..............................................................................8
5. INSTANT ..............................................................................9
6. INSTANT-STAY ..........................................................................6
7. BYPASS ..............................................................................lO
8. UNBYPASS ..............................................................................ll
9. USER DEFINITION ...................................................................ll
10. USER DELETION ....................................................................ll
11. KEYPADAUXILIARY CONDITIONS ........................................12
12. DURESS .. . ......... . . ...................... ... ...........12
13. ARM-0NLY(MAID9 CODE ......................................................l2
14. QUICK ARMING ......................................................................l2
15. QUICK FORCED ARMING ......................................................l2
16, INSTALLATION WYOUT .........................................................l3
17. SYSTEM TESTING ................................................................l4
FCC STATEMENT .........................................................................l5
LIMITATIONS STATEMENT .....r....................................................l6
WARRANTY . ......... ....... 18
OWNERS lNFORMATION..............................................................~g

1. KEYPAD LAYOUT
The keypad is the arming s4ationfor the XL-2 secur~ systems. Four different
versions are available: ametal plate flush mounted versbn (XL4600RM),
p~stb cased surface mount versions (XL4BOOSMor ~15), and an LCD (l~uM
crystal display) verebn confaini~ atwo tinereadout (3305). The keypads have
the folbwi~ appearaw and wntain the folbwing tieme:
2
XL4e00RMKe~d
SS05 LCDKe~d
2\
-
XLWSM K,y~d
1) ZONE STATLfSINDICATORS -displays zone status as follows
ALARM Fas Btink,
BYPASS: LowBflnMow lntens~,
TROUBLE Sbw Pulse
NOTREADX SotidOn
2) ARWDISARM INDICATOR indicates aysfem is armed or disarmed. Ablue
LEO indcates communication failure wfih the central station.
3) STAY- Indicates the system is armed with the interbr zones bypassed.

4) INSTANT- Indisates system is ARMED w~h all delay zones instant.
5) A~LOW BATTERY -Indkates system Is nmning on AC (ON) or backup
baffe~ (OFF).
6) READY Indhtea whether the system is ready for arming.
7) NUMERICAL KEYPAD operates In asimilar manner to acalculator or
telephone wtih the d~tis 0-9 and *#cleatiy me~ed.
8) DISPLAY AREA -This section of the LCD keypad tisplays tha current
system Safus in this two line by si~een character display. The sssond hne of
tMs tieplay can be p~rammed by your installer to contain customized des~.p
tore for the areas of protectbn wiftin your Iocston.
FIRE AURM-Audible and Visual Indicators.
On LED fyw keypads the programmed fire zone LED and the ARM LED will
bhnkfast to itiiate afire slam. On LCD type ke~ads, the word “ALARM” will
flash on the dsplay area. The sounder in the keypad will pulse ON amf OFF
folfowiW the Mll or siren ouf~.
READY LEDIREADY MESSAGE
AFLASHING ready LED or the words “PROGRAMMING MODE STANDBW
indicate that the uni isinthe installer pmgrammi~ me. The Fire and BuQlaW
initiating cirwks are dsabled while in this me. Contact your inetallatbn
company Kme persists.
SOUNDER
The Sounder in the keypad beeps whenever the ke~ad keys are depressed.
The Wutier also beeps on pre-slam EVERY TIME as areminder to disarm
the system. The sounder will produce fast beeps when ammplete message is
sent to the cemral station. It is etiremely important that mre be used when
arming the sySem because if the system is NOT R~DY and the user @de is
entered, the keypad will beep ae a negative acknowledge.
FIRE PROTECTION
Fire codtione are afwaye given priority.
Throughout this users manual the following conventions are ueedto &splay the
keystrokes required to perform the funtilons.
BYPA* KeylabeledBYPASSonkeypad.
INSTANT KeyIabeld INSTANTonkeypad.
STAY KeylabeledSTAYonkeypad.
CODE Keylabeled~DE onkeyped
[USER] Fourdigtiusersode.
VI.91 ICCR MANI !&l Psm 6

——
2. ARMING THE SYSTEM
ARMING the syetem acfivatea the Security System. Arming -n on~ be per-
formed Kall zonee are R~DY. For example, if aprotected door is open, the
ayefem cannot be armed.
SYSTEM READY
The system Isready to be amed ifthe RWDY indcator KghtON,
On LCD keypads the following display will appaac
w
If the ayatem ia ready,ARMING can be perfomed as follows;
ARMING PRWEDURE:
Enter your four dlgti user mde into the keypad: [USER]
The ARMED indicator tight will now be ~tad iyou are leaving the bme you
may exti through adoor designated by your installer as an ex~entry zone for a
fixed time period kmwn aa the exit delay.
Entry/exit times ENTRY —=1~ —semnds
LCD keypads will display the folbwing mssage;
B
NOTE: The system can be armed wtihout the backup battery being connected.
SYSTEM NOT READY
Ifthe system is not ready to be armed the READYiticetor will be OFF.On LED
baaed keypade the zone indicator Iighfa will di~lay the zones whah are
currently not ready.The condition of eachzone indicator reflects what the status
of each zone as follows:
ALARM: Fad bin~ng.
BYPASS Slowblinkingbw intens~.
TROUBLE slow pulse
NOTREADY SotidON

The LCD keypad adisplay will appear imfiiatlng that the system is not ready
followed by displays showing the zone number and desctipibn of the zone or
zones whkh are not ready.
For exampla:
~
=
Inthis exampla, the front door is not ready (Zone 1). Tomake the system ready
detemine which zones are not ready by obaewing the zone i~itor hghfa,or
the display section of the LCD keypad. Fromthe zone number you can fire! oti
which area of protection is not ready.
For example, if Zone 1is not ready it might mean aWI*W is open. OW the
problems w~h each zone haa been resolved the R~DY ~ghfwill a~ar and
the system can be armed.
ToARM the system when the system is NOT RWDY
.Detemine whnh zones are not ready and petiorm what is
necessary to ready the zone(a) (example, close window, etc.),or
.Bypass the zone(s) not ready. Bypassing should only be
performed Hthe zone cannot be made ready or infeWonally will
remain not ready. Zones that ara bypassed ara not proteaed
whan the system is amed.
3. DISARMING
~aarming the secu(fiy system will deactivate the burglary portions of the
syaem. Ttie procedure can also be used to reset your system Kyou acckfen-
tally set off the system (example, opened a window while the system waa
armed, or excasaive amount of smoke atilvated fire protetion system).
DISARM PROCEDURE:[USER]
Enter your user @de.
IF NO ALARMS HAVE TAKEN PUCE
U~n diaamiW the ARMING indwatorwill@ off.The aystemdsplaythe currenf
status. LCD keypads display the SYSTEM R~DY masaage.
YI
-9
I
lGCQ
MANI lAI
Dsm
7

IF AMRMS HAVE TAKEN PLACE
If alarms or other @ndtions such as system troubles have taken place since
the initial sytiem arming, they will appear on the display. The condiions that
have occurred appear in the zone display aecfion of the keypad. LCD keypads
will reflect the current system status through the indicator lights as follows;
AMRM Fastbtinting.
BYPASS Slowbfinkinglowintens~.
TROUBLE Sbw pulse
NOTREADY SoFdON
Bu~la~ slams will be indoated with aSTEADY sound through the keypad
while FIRE alarms will generate apulsing sound.
LCD keypads will show the alarm condiions wfih adisplay as follows:
This display shows the zones in alarm. After entry of your four digfi user code
the folbwiW display will appeac
~
lMPORT~T If an infm$ion has taken place wtile you were away,do not enter
until the hatiin has been securedlll. Call for help from aneighbr’a houee.
Wak for the porwe!
.Toclear the ~splay of the slam ortrouble conditions and silence
the audible s@nalenter [USER] again.
4. STAY
The STAY mode is another way to ARM your system while you remain in the
location. The STAY mode will deactivate any interior protection zones which
meana that you will be free to walk throughout your location without ativating
the alarm syafem.
In order to enter the STAY mode, the system must be READY. (see previous
description).
v, .0, ,aee .,,.,, !., -... .

STAY PRWEDURE STAY[USER]
Depress the STAY key folbwed by your user aode. After asu~essful STAY
arming the ARMED Indbator will be ~fi.In addition, on LED keypads the STAY
indiostor will be ~t.
In LCD keypads the folbwi~ @splaywill appean
In the STAY me only the efiemal or perimeter burglary protedon is aaive.
You are free to walk amuti fhe reskfewe without adivating any of the inferior
proteofbn zones.
.Remember, you must DISARM the system to when you want to
leave the premise.
Note: The STAYoption will automafimlly be reset after the system is disarmed.
5. INSTANT
TheINSTANT mode arms the system and ehminates the entry time delay
intewal. rnIS mode wukf be used if anyone enfare through an entry/exif zone
the alarm system will instantly adiate.
The system mst be raady to seled the INSTANToption.
INSTANT PRNEDURE: INSTANT[USER]
Depress the INSTANT key followed by your user oede.
UWn suaseful INSTANTARMING of the system the ARMED indicator will be
~i. In addtbn, on LED ke~ads the instant indkator will bs ON.
LCD keypads will sontain the following message;
m
Note: The INSTANT option will automatically be reset after the system is
disarmed.
XL-2
USERWNUAL
Page9

In INSTANT STAY rode, the system is armed, the inferior ~rtions bypassed,
and entry delay is suspended, The system must be READYto enter this mode.
INSTANT-STAY PR~EDURE:
INSTANT STAY [USER] or STAYINSTANT IUSER]
Depress the INSTANT and STAY keys and then your user rode. After a
sumssful INSTANT STAYarming the ARMED indioator will be ~i. In addiiion,
on LED keypads both th6 INSTANT and STAY tightswill be on.
LCD keypads will mntain the following meesage;
~. BYPASS m
Bypasees are performed to efiminate burgla~ zones that are not ready or fauffy
from atiivating the seourfiy system.
BYPASS PROCEDURE: BYPASS [USER] ZN
Depress the BYPASS key. Enter your user @de and zone number (l-6) to be
bypaseed.
Exampfe: BYPASS [USER] 2bypasses zone 2
NOTE Zones that are BYPASSED are NOT proteaed when the syetem ia
armed.
If the zone has already been bypasaed, the sequence will unbypass the zone
except it the eystem is armed and the unbypasssd zone is still not ready.
Unbypaes means that the zone returns as an astive burglary zone. After the
bypass (or unbypass) mmmand has been aapted the unit will emit a@n-
finuous beep and zones that have been bypaseed will appear in aslow bhnkirrg
mode in the zone statue area on LED keypads, LCD keypads will display the
zone bypassee as aseconda~ display after the SYSTEM READYor SYSTEM
NOT READY as shown below:
n
If multiple zonee are bypassed then more than one display will appear. NOTE:
Tem~rary users (I.e. babysitter, housekeeper) should NOT be shown the
BYPASS procedure.
XL-2UeERWNUALPwe 10