Festo CPX-AP-A-4IOL-M12 User manual

CPX-AP-A-4IOL-M12
IO-Link Master
Operating instruc-
tion
8160747
8160747
2023-01
[8160749]

Translation of the original instructions
IO-Link is a registered trademark of its respective trademark holder in certain countries.

Festo — CPX-AP-A-4IOL-M12 — 2023-01
3
Table of contents
1 About this document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1 Applicable documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2 Product version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 Product labelling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.4 Specified standards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.3 Training of qualified personnel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Additional information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 Product overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.1 Product design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2 LED displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.3 Connecting elements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.4 Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5 Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7 Commissioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7.1 Address space (data length inputs/outputs). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7.2 IO-Link device description file (IO-Link Device Description). . . . . . . . . . . . . . . . . . . . . . . . 9
8Parameterisation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
9 Diagnostics and fault clearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9.1 Diagnostic messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9.2 LED displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
9.3 Event codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.3.1 Master event codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.3.2 Device event codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
10 Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4
Festo — CPX-AP-A-4IOL-M12 — 2023-01
About this document
1 About this document
1.1 Applicable documents
All available documents for the product èwww.festo.com/sp.
Document Table of contents
Operating instructions for automation system
CPX-AP-A
Instruction manual and important information on
assembly, electrical installation and maintenance
tasks as well as description of the automation
system CPX-AP-A
Tab. 1: Applicable documents
1.2 Product version
This document refers to the following product versions:
Product Version
CPX-AP-A-4IOL-M12 IO-Link master CPX-AP-A-4IOL-M12 from revision 1
Tab. 2: Product version
The product version can be determined from the product labelling.
There may be an updated version of this document for this or later product versions
èwww.festo.com/sp.
1.3 Product labelling
The product labelling and the Data Matrix Code are printed on the housings of the modules. Scanning
the Data Matrix Code with an appropriate device opens the Festo Internet page with documents
appropriate for the product. Alternatively, the Product Key (11-digit alphanumeric code on the product
labelling) can be entered in the search field èwww.festo.com/sp.
1.4 Specified standards
Version
IEC60204-1:2016-10 IEC60364-4-41:2005-12
Tab. 3: Standards specified in the document

Festo — CPX-AP-A-4IOL-M12 — 2023-01
Additional information
5
2 Safety
2.1 Safety instructions
–Only use the product if it is in perfect technical condition.
–Observe the identifications on the product.
–Store the product in a dry environment protected from UV and corrosion. Keep storage times short.
–Before working on the product, switch off the power supply and secure it against being switched on
again.
2.2 Intended use
The product described in this document is intended only for use as an interface between an automa-
tion system CPX-AP-A and devices with IO-Link Port.
Use the product only as follows:
–Use only in an industrial environment. Outside industrial environments, e.g.in commercial and
residential/mixed-use areas, it may be necessary to take measures to suppress radio interference.
–Use only in combination with modules and components that are approved for the applicable
product variant èwww.festo.com/catalogue.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can evaluate the work
and detect dangers. The qualified personnel have skills and experience in dealing with electrical
(open-loop) control technology.
3Additional information
–Contact the regional Festo contact if you have technical problems èwww.festo.com.
–Accessories and spare parts èwww.festo.com/catalogue.