Fisher-Price SPARKLING SYMPHONY 71970 User manual

Baby's Gym
Toddler's First Piano
71970
Instructions
w
w
w.
fi
s
he
r
-p
r
i
c
e
.
c
o
m
Sparkling Symphony™Gym

2
•Please keep this instruction sheet for future
reference, as it contains important information
•Adult assembly is required.
•Requires three “C” batteries for operation
(included).
•Tool required for battery installation: Phillips
screwdriver (not included).
To prevent entanglement injury,
NEVER place gym or suspend
links in crib or playpen.
NEVER add strings, ties or other
products to the gym.
WARNING
PRINTED IN MEXICO 71970e-0920

3
For best performance, we recommend
replacing the batteries that came with
this toy with three, new alkaline “AA”
(LR6) batteries.
•Locate the battery compartment on the arch.
•Loosen the screws in the battery compartment door
with a Phillips screwdriver and remove the door.
•Insert three, new “C” (LR14) alkaline batteries.
Hint: We recommend using alkaline batteries for
longer battery life.
•Replace the battery compartment door and
tighten the screws with a Phillips screwdriver.
Do not over-tighten.
•When sounds or lights from this toy become
faint or stop, it's time for an adult to change
the batteries!
Battery Compartment Door Arch
Battery Replacement

4
Battery Safety Information
1.5V x 3
“C” (LR14)
SHOWN ACTUAL SIZE
Batteries may leak fluids that can cause a
chemical burn injury or ruin your toy. To avoid
battery leakage:
•Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
•Insert batteries as indicated inside the battery
compartment.
•Remove batteries during long periods of non-
use. Always remove exhausted batteries from
the toy. Dispose of batteries safely. Do not
dispose of batteries in a fire. The batteries may
explode or leak.
•Never short-circuit the battery terminals.
•Use only batteries of the same or equivalent
type, as recommended.
•Do not charge non-rechargeable batteries.
•Remove rechargeable batteries from the toy
before charging.
•If removable, rechargeable batteries are used,
they are only to be charged under
adult supervision.

One-time Assembly
•Position one of the joints front side up.
•Position a threaded knob with the peg side down.
•Insert and snap the threaded knob into the upper
hole in the joint.
•Insert a right and left leg (marked R or L on each
leg) into the slots on the joint. Make sure the
buttons on the legs fit into the circular openings
in the joints.
•Repeat this procedure to attach the other threaded
knob and two legs to the remaining joint.
Button
Leg
Hole
Opening
Threaded Knob
Joint
5
1
1
Baby Gym

•Position the arch so that the keys are facing you.
•Fit one end of the arch to the threaded knob on
a leg assembly.
•Turn the threaded knob clockwise to attach the
leg assembly to the arch. Make sure the
knob is fully tightened.
•Repeat this procedure to attach the other leg
assembly to the arch.
Arch
Threaded Knob
Leg Assembly
Keys
6
2
2
Baby Gym

7
Hanger Lower
Groove
Upper
Groove
•Rotate the hanger on the
back of the arch down.
•Fit the T-end of one of the
hanging toys (star, sun
or moon) into a groove in
the front side of the hanger.
Pull the hanging toy down
to “snap” it into place.
Hint: The hanging toys can be attached to the
hanger at two different levels! Select the appro-
priate groove so that your baby can reach and
activate sounds and lights!
•Repeat this procedure to attach the other two
hanging toys to the hanger.
Groove
T-End
3
3
Baby Gym

8
•Attach the stars to the bottom of the sun.
•Attach the star ring to the bottom of the moon.
•Slide the power switch to •• . Baby will enjoy
approximately 10 minutes of music and
dancing lights when one of the toys is tapped.
•Adjust the volume to a comfortable listening
level. Slide the switch to for low volume and
for high volume.
Magic Star
Volume Switch Volume Switch
Star
Ring Stars
Power Switch
4
4
•Slide the power switch to •. Baby enjoys one
song and twinkling lights when any one of the
toys is tapped.
•Press the magic star to hear a magical sound!
•Slide the power switch to to turn off sound
and lights.
Note: To re-assemble this toy for use as a piano,
simply turn the knobs on the leg assemblies
counter-clockwise and remove the arch. Follow
the instructions beginning on page 9, step 2.
Baby Gym

One-time Assembly
•Position one of the joints front side up.
•Position a threaded knob with the peg side down.
•Insert and snap the threaded knob into the upper
hole in the joint.
•Insert a right and left leg (marked R or L on each
leg) into the slots on the joint. Make sure the
buttons on the legs fit into the circular openings
in the joints.
•Repeat this procedure to attach the other threaded
knob and two legs to the remaining joint.
Button
Leg
Opening
Hole
Threaded Knob
Joint
1
1
9
•Remove the hanging toys from the hanger.
•Rotate the hanger up and "snap" it to the arch.
Arch
Hanger
2
2
Toddler Piano

10
•Position the arch so that the keys are upright.
•Fit one end of the arch to the threaded knob
on a leg assembly.
•Turn the threaded knob clockwise to attach the
leg assembly to the arch. Make sure the
knob is fully tightened.
•Repeat this procedure to attach the other leg
assembly to the arch.
Threaded Knob
Arch
Keys
Leg Assembly
3
3
Toddler Piano

11
•Fit the T-end of a hanging toy into either groove
in either leg assembly.
•Pull the hanging toy down to "snap" it into place.
•Attach the stars to the leg assembly as shown.
•Attach the star ring to either leg assembly.
T-End
Grooves
Star
Star
Star Ring
Moon
Leg
Assembly
Leg
Assembly
4
4
5
5
Toddler Piano

Keys
Volume Switch Magic
Star
Power Switch
•Slide the power switch to ••. Press any of the
keys to hear a part of a song and see a twinkling
light. After the music stops, press another key to
hear the next part of the song and see more
lights.
•Adjust the volume to a comfortable listening
level. Slide the switch to for low volume and
for high volume.
12
6
6
Volume Switch
•Slide the power switch to •. Press any key to
hear a musical note and see a twinkling light.
•Press the magic star to hear a magical sound!
•Slide the power switch to to turn off sound
and lights.
Note: To re-assemble this toy for use as a gym,
simply turn the knobs on the leg assemblies
counter-clockwise and remove the arch. Follow
the instructions beginning on page 6, step 2.
Toddler Piano

•Wipe all parts of this toy with a clean cloth
dampened with a mild soap and water solution.
Never immerse this toy.
•Keep this toy away from direct sunlight and
other sources of heat.
•This toy has no consumer serviceable parts.
Do not take this toy apart.
Care
13

14
For countries outside the United States:
CANADA: Questions? 1-800-567-7724. Mattel Canada Inc.,
6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive,
Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance
Centre, Harbour City, Tsimshatsui, HK, China.
Consumer Information
Questions? We'd like to hear from you!
Call Fisher-Price®Consumer Relations, toll-free at
1-800-432-KIDS (5437), 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired
consumers using TTY/TDD equipment, please call
1-800-382-7470. Or, write to: Fisher-Price®
Consumer Relations, 636 Girard Avenue, East
Aurora, New York 14052.

Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide rea-
sonable protection against harmful interference
in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or tele-
vision reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment
and receiver.
•Consult the dealer or an experienced radio/TV
technician for help.
Note: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
FCC Note (United States Only)
15

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate
U.S. trademarks of Mattel, Inc.