Fisher-Price W9497 User manual

W9497
Quick Start
Turn power
on
Select swing
speed
Select
music or
sounds
Push seat
to start
swinging
PUSH
www.fisher-price.co.uk
IMPORTANT! Read the instructions carefully before use and keep them for future reference.

2
•Pleasereadtheseinstructionsbeforeassemblyanduseof
this product.
•Adultassemblyisrequired.
•Toolsneededforassembly:AllenWrench(included)andPhillips
screwdriver(notincluded).
•
Requiresfour“D”(LR20)alkalinebatteriesforoperation(notincluded).
•Thisproductdoesnotreplaceacotorbed.Shouldthechildneedto
sleep, place the child in a suitable cot or bed.
IMPORTANT!Maximumweightlimit:9kg.Ifyourchildweighsless
than9kg,butisreallyactiveandappearstobeabletoclimboutofthe
swing, immediately discontinue its use.
•Productfeaturesanddecorationsmayvaryfromphotographs.
Consumer Information
Motor Assembly
Pad
2 Lower Legs
(Left and Right)
Seat Back TubeSeat Bottom
Frame Tube
IMPORTANT! Pleaseremoveallpartsfromthepackageandidentify
thembeforeassembly.Somepartsmaybepackedinsidethepad.
Allen Wrench
2 Upper Legs
2 Seat Back Hubs
Parts
Do not over-tighten the screws or the bolt.
#8 x 1,9 cm Screw – 8
Fasteners Shown Actual Size
M5 x 40 mm Bolt - 1
Great Britain:VanwallBusinessPark,MaidenheadSL64UB.
Helpline:01628500303.www.service.mattel.com/uk.
MattelEuropaB.V.,Gondel1,1186MJAmstelveen,Nederland.
Australia:MattelAustraliaPty.Ltd.,658ChurchStreet,
LockedBag#870,Richmond,Victoria3121Australia.
ConsumerAdvisoryService1300135312.
New Zealand:16-18WilliamPickeringDrive,Albany1331,Auckland.
Asia:MattelEastAsiaLtd,Room1106,SouthTower,
WorldFinanceCentre,HarbourCity,Tsimshatsui,HK,China.
Malaysia:Diimport&DiedarkanOleh:MattelSEAPtdLtd.
(993532-P)Lot13.5,13thFloor,MenaraLienHoe,Persiaran
TropicanaGolfCountryResort,47410PJ.Tel:+603-33419052.
©2012Mattel.AllRightsReserved.
PRINTED IN CHINA W9497pr-0728
To prevent serious injury or death from falls and being
strangled in the restraint system:
•Neverleavethechildunattended.
•Alwaysusetherestraintsystem.
•Donotusethisproductonceyourchildcansitupunaided
orweighsmorethan9kg.
•Thisproductisnotintendedforprolongedperiods
of sleeping.
•Neverusethisproductonanelevatedsurface,e.g.,atable.
•Toavoidinjuryensurethatchildrenarekeptawaywhen
unfolding and folding this product.
•Donotletchildrenplaywiththisproduct.
•Donotmoveorliftthisproductwiththebabyinsideit.
•Neverusethetoybartoliftormovethisproduct.
WARNING

3
IMPORTANT! Before assembly or each use, inspect this product for
damagedhardware,loosejoints,missingpartsorsharpedges.DONOT
useifanypartsaremissingorbroken.ContactMattel for replacement
partsandinstructionsifneeded.Neversubstituteparts.
1
•Whilepressingthebuttonsonthemotorassemblytubes,fititonto
the straight end of each upper leg.
Hint: You may need the help of another adult.
PRESS
Upper Legs
Motor Assembly
Assembly
•Whilepressingthebuttonontheendofalowerleg,fititintothe
shortendofanupperleg.Continuetopushthelowerleguntilit
"snaps" into the hole.
•Repeat this procedure to assemble the other lower leg to the other
upper leg.
2
Lower Legs
PRESS PRESS
•Pullapartthelegs.
•Liftthefreeendoftheframesupportbar.
•Fittheholeintheframesupportbaroverthepegontheopposite
leg.Pushto"snap" the frame support bar in place.
Frame Support Bar
3
•Fittheseatbackhubsintotheslotsintheseatbottom.
Hint: The seat back hubs only fit one way. If they do not seem to fit,
try the other slot.
4
Seat Back Hubs
Seat Bottom
•Turntheseatbottomfacedown.
•Insertfour#8x1,9cm screws into the holes in the seat and tighten
withaPhillipsscrewdriver.
•Turntheassemblyupright.
BOTTOM VIEW
5

4
Assembly
•Fittheendsoftheseatbacktubeintotheseatbackhubs.
•Pushtheseatbacktubeintothehubsuntilyouheara"click" on
each side.
•Pullupontheseatbacktubetobesureitissecure.
Hint: The seat back tube is designed to only fit one way. If it comes
out of the seat when you pull on it, turn it around and try again.
Seat Back Tube
Seat Back Hubs
6
•Turntheseatfacedown.
•Fittheframetubeconnectortothepegsontheseatbottom.
•Insertfour#8x1,9cm screws into the frame tube connector and
tightenwithaPhillipsscrewdriver.
Frame Tube
BOTTOM VIEW
7
•InserttheM5x40mmboltthroughtheholeinthetheupperseat
tube. Fully tighten the screw with the Allen wrench.
•Turntheassemblyupright.
9
•Turntheframeassemblyonitsside.
•Slidetheframetubeintothemotorassemblytube.
8
Motor Assembly Tube
Frame Tube
10
Pad
•Fittheupperpocketonthebackofthepadovertheseatbacktube.

5
•Fitthewaistbeltsontheseatbottomupthroughtheslotsinthepad.
11 Waist Belts
12
Smaller Baby
•Inserttheendsoftheshoulderbeltsthroughthelowerslotsinthe
seat pad back.
Lower Slots
13
Larger Baby
•Inserttheendsoftheshoulderbeltsthroughtheupperslotsinthe
seat pad back.
Upper Slots
•Fittheelasticloopsonthepaddownthroughtheholeson
the seat bottom.
14
•Fittheelasticloopstothepegsundertheseatbottom.
15
Pegs
BOTTOM VIEW
•Fitthepadclipsaroundtheedgeoftheseatbottom.
16
Assembly

6
1,5V x 4
“D” (LR20)
•LoosenthescrewsinthebatterycompartmentdoorwithaPhillips
screwdriver and remove the battery compartment door.
•Insertfour“D”(LR20) alkaline batteries into the battery compartment.
•Replacethebatterycompartmentdoorandtightenthescrews.
•Ifthisproductbeginstooperateerratically,youmayneedtoreset
theelectronics.Slidethepowerswitchoffandthenbackon.
Note: Lowbatterypowermaycauseproductmovementtoslow,
sound and lights to become faint or product to turn off all together.
Ifthisshouldhappen,replacethebatterieswithfouralkaline
"D"(LR20)batteries.
Battery Installation
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that
can cause a chemical burn injury or ruin your product. To avoid
battery leakage:
•Donotmixoldandnewbatteriesorbatteriesofdifferenttypes:
alkaline,standard(carbon-zinc)orrechargeable(nickel-cadmium).
•Insertbatteriesasindicatedinsidethebatterycompartment.
•Removebatteriesduringlongperiodsofnon-use.Alwaysremove
exhaustedbatteriesfromtheproduct.Disposeofbatteriessafely.
Donotdisposeofproductinafire.Thebatteriesinsidemayexplode
or leak.
•Nevershort-circuitthebatteryterminals.
•Useonlybatteriesofthesameorequivalenttypeasrecommended.
•Donotchargenon-rechargeablebatteries.
•Removerechargeablebatteriesfromtheproductbeforecharging.
•Ifremoveable,rechargeablebatteriesareused,theyareonlytobe
charged under adult supervision.
Hint: We recommend using alkaline batteries for longer battery life.
Setup and Use
Waist Belts
Crotch Belt
Securing Your Child
•Placeyourchildintheseat.
•Slideeachshoulderbeltclipontoeachwaistbeltbuckle.
•Fastenthewaist/shoulderbeltstothecrotchbelt.Makesureyou
hear a "click" on both sides.
•Checktobesuretherestraintsystemissecurelyattachedbypulling
itawayfromyourchild.Therestraintsystemshouldremainattached.
•Tighteneachwaiststrapsothattherestraintsystemissnugagainst
yourchild.Pleaserefertothenextsectionforinstructionstotighten
the waist straps.
1
•Protecttheenvironmentbynotdisposingofthisproduct
withhouseholdwaste(2002/96/EC).Checkyourlocal
authority for recycling advice and facilities.
To prevent serious injury or death from falls and being
strangled in the restraint system:
•Neverleavethechildunattended.
•Alwaysusetherestraintsystem.
•Donotusethisproductonceyourchildcansitupunaided
orweighsmorethan9kg.
•Thisproductisnotintendedforprolongedperiods
of sleeping.
•Neverusethisproductonanelevatedsurface,e.g.,atable.
•Toavoidinjuryensurethatchildrenarekeptawaywhen
unfolding and folding this product.
•Donotletchildrenplaywiththisproduct.
•Donotmoveorliftthisproductwiththebabyinsideit.
•Neverusethetoybartoliftormovethisproduct.
WARNING

7
Adjusters
• Totightenthewaistbelts:Feedtheanchoredendofthebeltup
through the buckle to form a loop A.Pullthefreeendofthebelt
B. Repeat this procedure to tighten the other belt.
• Toloosenthewaistbelts:Feedthefreeendofthebeltupthrough
the buckle to form a loop A. Enlarge the loop by pulling on the end
ofthelooptowardthebuckle.Pulltheanchoredendofthebeltto
shorten the free end of the
belt B. Repeat this procedure to loosen the other belt.
Note:Afteradjustingthebeltstofityourchild,makesureyoupullon
them to be sure they are securely fastened.
3TIGHTEN LOOSEN
Adjusters
Swinging Direction
•Turntheseatuntilitlocksintoplacetoselectaswingingdirection.
4
2TIGHTEN LOOSEN
• To tighten the shoulder belts:HoldtheadjusterA and pull the
front shoulder strap down B.
• To loosen the shoulder belts:Slidetheadjusterdown.
Setup and Use
Volume
Swing Speed
Swing Power
Music and Sounds
Power L.E.D.
Swing Speed L.E.D.
Swing, Music and Sounds!
Swing
•Slidethepowerswitch toturnpowerON.ThepowerL.E.D.will
turn on.
•Presstheswingspeedbuttons and toadjusttoanyofsix
swingspeeds.LookattheL.E.D.'sbelowthebuttonstoseethe
speed you selected.
•Pushtheseattostarttheswinging.
Hints:
- As with most battery-powered swings, a heavier child will reduce
the amount of swinging motion on all settings. In most cases, the
low setting works best for a smaller child while the high setting
works best for a larger child.
- If the low setting provides too much swinging motion for your child,
try placing one end of a blanket underneath your child and let the
other end of the blanket drape down while swinging.
•Slidethepowerswitch toturnpowerOFF.ThepowerL.E.D.will
turn off.

8
Storage
•Pushthetabontheframesupporttoreleaseit.
•Pulltheendoftheframesupportbaroffthelegandlowerit.
1
2
•Pushthelegstogether.
•Leantheswingagainstawallforsupport.
3
Tab
To remove the pad:
•Removetheelasticloopsfromthepegsandthepadclipsonthe
seat bottom.
•Pulltherestraintsdownthroughtheslotsinthepad.Liftthepadoff
the seat.
To replace the pad, follow the assembly instructions.
BOTTOM VIEW
•Thepadismachinewashable.Washitseparatelyincoldwateron
thegentlecycle.Donotusebleach.Tumbledryseparatelyonlow
heat and remove promptly.
•Theframeandmobilemaybewipedcleanusingamildcleaning
solutionandadampcloth.Donotusebleach.Donotuseharshor
abrasive cleaners. Rinse clean with water to remove residue.
Care