Fisher-Price N8849 User manual

fisher-price.com
Please keep this instruction sheet for future reference,
as it contains important information.
Requires four “D” (LR20) alkaline batteries for mobile
operation and two "AAA" (LR03) alkaline batteries for
remote operation (batteries not included).
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
N8849

2
WARNING
Consumer Information
Prevent Entanglement Injury
•Keepoutofbaby’sreach.
•Removemobileportionofproductfromcriborplaypenwhenbaby
begins to push up on hands and knees.
•Thisproductmaynotattachtoallcribdesigns.Donotadd
additional strings or straps to attach to crib or playpen.
•UseONLYattachedtoacrib.
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
•Donotmixoldandnewbatteriesorbatteriesofdifferenttypes:alkaline,standard
(carbon-zinc) or rechargeable (nickel-cadmium).
•Insertbatteriesasindicatedinsidethebatterycompartment.
•Removebatteriesduringlongperiodsofnon-use.Alwaysremoveexhaustedbatteries
from the product. Dispose of batteries safely. Do not dispose of product in a fire. The
batteriesinsidemayexplodeorleak.
•Nevershort-circuitthebatteryterminals.
•Useonlybatteriesofthesameorequivalenttype,asrecommended.
•Donotchargenon-rechargeablebatteries.
•Removerechargeablebatteriesfromtheproductbeforecharging.
•Ifremovable,rechargeablebatteriesareused,theyareonlytobechargedunder
adult supervision.
Battery Safety Information
IMPORTANT! Always attach with all provided fasteners tightly to a crib or playpen
according to the instructions. Do not add additional strings or straps to attach to a crib.
Check frequently.
•Themobileportionofthisproductmaybeusedfrombirthuntil5months.
•Thebaseportionofthisproductmaybeusedfrombirthuntil36months.
•Acribmobileisintendedforvisualstimulationandisnottobegraspedbyachild.
•Wipethistoywithacleanclothdampenedwithamildsoapandwatersolution.Donot
immerse this toy. The soft toys are surface washable.
•Thistoyhasnoconsumerserviceableparts.Donottakethistoyapart.

3
Parts
Arm
Note: All of the screws used to assemble this toy are attached to the product.
Follow these instructions carefully to fully secure the screws. Tighten and loosen
all screws with a Phillips screwdriver. Do not over-tighten the screws.
Base
Crib Adaptor
4 Soft Toys
Canopy
Remote

4
Remote
•LoosenthescrewinthebatterycompartmentdoorwithaPhillipsscrewdriverand
remove the door.
•Inserttwo"AAA"(LR03)alkaline batteries.
•Replacethebatterycompartmentdoorandtightenthescrew.
•Ifthisproductbeginstooperateerratically,youmayneedtoresettheelectronics.Slide
the power/volume switch on the mobile base off and then back on. Remove the batteries
from the remote and reinstall them.
1,5V x 4
“D” (LR20)
We recommend using alkaline batteries for longer battery life.
Mobile Base
•LoosenthescrewsinthebatterycompartmentdoorwithaPhillipsscrewdriverand
remove the door.
•Insertfour“D”(LR20)alkaline batteries.
•Replacethebatterycompartmentdoorandtightenthescrews.
IMPORTANT!Undernormaluseconditions,thebatteriesinthemobilebasewillrequire
replacementmoreoftenthanthebatteriesintheremote.Whensoundsorlightsbecome
faintorstop,it’stimeforanadulttochangethebatteries.
Battery Installation
1,5V x 2
"AAA" (LR03)

5
Assembly
•Fitthecribadaptortothebaseandtightenthescrews.
IMPORTANT! Make sure the straps are over the top of the crib adaptor.
Crib Adaptor
Base
•Fitthecanopyontothepegontheendofthearm.Pushto"snap" in place.
Arm
Canopy
1
2

6
Assembly
•Fitthestringonasofttoythroughtheslotinthecanopy.Pulldowngentlyonthesoft
toy to secure the string on the canopy.
•Repeatthisproceduretoattachtheremainingsofttoystothecanopy.
•First,pressthebuttononthemobilebase,nexttothesocket Aand then slide the
socket door open B.
•Fitthearmintothesocketinthebaseandtightenthescrews.
A
PRESS
SLIDE
B
©2012 Mattel. All Rights Reserved.
PRINTED IN CHINA N8849b-0921
Arm
Socket
3
4

7
Crib Attachment
•Positionthebasesothatthedecoratedsidefacestheinsideofthecrib.
•Fitthebaseontothecribtoprail.
•Makesurethetopstrapishangingoverthecribtoprail.Pullthebottomstrapthrough
the crib rails.
•Bucklethestraps.Makesureyouheara “click”.
Crib Top Rail
•Makesurethestrapsaretightenedsecurelyaroundthecribrail.
•Whilepushingthetabatthebottomofthebuckle,pullthefreeendofthestrapto
tighten on the rail.
Hint: You can secure the free end of the strap to the base.
•To loosen the strap for removal, simply pull the buckle down.
Base
Buckles
1
2

8
Crib Attachment
•Tiethebasestringstoacribspindle.
Note: It is better the tie the strings in a knot than a bow, since a bow may be easily untied.
•Ifthedistancebetweenthebaseandthemattressislessthan7Inches(18cm),lower
the crib mattress.
Mattress
At Least 7 Inches (18 cm)
Bottom of Base
3
4

9
Use
•Intheunlikelyeventthatuseoftheremoteinterfereswithnormaluseofotherremote
controlled equipment, such as televisions or stereos, or use of other electronic or battery
powered appliances interfere with operation of the mobile, do not use both at the
same time.
•Youmaynoticealossofrangebetweentheremoteandthemobilewhenusinginbright
light.Forbestperformance,avoidusingtheremoteinareasofbrightlight.Movethe
mobile, or reduce the amount of light to improve performance.
•Positionthemobilesothatthereceiverarrowpointstowardstheareathattheremote
will be used. Make sure there is a clear path between the remote and the mobile. Point
the end of the remote toward the mobile receiver and press the button.
Remote

10
Power/Volume Switch
•SlidetheswitchtoONwith
low volume orONwithhigh
volume .Whenfinishedusing
the product, slide the switch
OFF .
Projector/Sound Switch
Slidetheswitchto:
- turns on sounds,
mobile and projector
- turns on sounds
and mobile
- turns on sounds only
Music or Sound Select Buttons
Press a music or sound button
on the front of the mobile base:
-forBach,Beethoven
and Mozart
- for nature sounds
- for heartbeat sounds
Use