Fisher-Price Nick Jr The Backyardigans L2176 User manual

L2176
www.fisher-price.com

Important Safety Information
• It is a good practice to start training children very young
regarding the importance of helmet use. When children are
older and riding bicycles and faster vehicles, it is important
that they use a helmet each and every time they ride. For
this reason, even while riding a tricycle, it is a good idea to
familiarize your child with helmet use, so that it becomes a
habit for life. Choose a helmet that complies with requirements
of the applicable certfiying agency for bicycle helmets.
To avoid serious injury:
•
Adult supervision is required.
• Never use near cars and other motor vehicles,
near streets, steps, sloped driveways, hills,
roadways, alleys, swimming pools or other
bodies of water.
• Always wear shoes.
• Never allow more than one rider.
This product contains small parts in its
unassembled state. Adult assembly is required.
Consumer Information
Visit us on line at www.service.fisher-price.com
Call Fisher-Price
®
Consumer Relations, toll-free at 1-800-432-5437,
9 AM – 7 PM EST Monday through Friday and 11 AM – 5 PM EST
Saturday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470. Write to us at: Fisher-Price
®
Consumer
Relations, 636 Girard Avenue, East Aurora, New York 14052.
• Please keep this instruction sheet for future reference, as it
contains important information.
• Adult assembly is required.
• Tools needed for assembly: Phillips Screwdriver, Hammer and
Scrap Block of Wood (all not included).
• Age: 11/2years - 5 years.
• Weight Limit: 50 lbs (23 kg).
• Please save all packaging material until assembly is complete to
ensure that no parts are discarded.
• Please wipe each part with a clean, dry cloth before assembly.
For countries outside the United States:
CANADA
Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga,
Ontario L5R 3W2; www.service.mattel.com.
GREAT BRITAIN
Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303;
www.service.mattel.com/uk.
AUSTRALIA
Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,Victoria 3121
Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND
16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA
Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City,
Tsimshatsui, HK, China.
Warnings and Caution
WARNING
CAUTION
2
©2006 Viacom International Inc. All Rights Reserved. Nickelodeon, Nick Jr.,
The Backyardigans and all related titles, logos and characters are trademarks of
Viacom International, Inc.

Parts
Cap Nut – 2 #8 x
󱗘
󱗘” Screw – 13 #8 x 3” Screw - 1
• All fasteners shown are actual size.
• Tighten and loosen all screws with an Phillips screwdriver. Do not over-tighten the screws.
• We’ve included extra fasteners for your convenience!
3
#10 x 1” Screw – 13
Seat Pin
Note: The base/handle assembly can be attached
to the trike in either the Ride-On Rocker (page 9)
or Learn to Pedal (page 10) mode.
Seat
Front Plate
Handlebar
Frame Cover
Frame
Footrest
2 Base/Handle Covers
Straight Axle 2 Rear Wheels
2 Cap Nuts
2 Wheel Caps
Handle Bottom
Base
Handle Top
Fork
2 Fork Covers
Pedal
Front Wheel Pedal Axle
4 Pedal Axle Covers
Handle Pin

Rear Wheel
Spoke Side Down
• Slide a rear wheel (spoke side down) onto the straight axle.
Wheel Cap
• Turn the frame upside down.
• Insert the straight axle assembly through the holes in the rear
of the frame.
• Fit the wheel cap into the center of the wheel. Tap the wheel
cap with a hammer to secure it to the wheel.
• Turn the frame on its side with the exposed end of the straight
axle up.
• Place the assembled rear wheel on the scrap block of wood.
• Slide the other rear wheel (spoke side up) onto the end of the
straight axle.
• Place a cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Gently pull the rear wheel
up to be sure the cap nut is securely attached to the
straight axle.
• Fit the wheel cap into the center of the wheel. Tap the wheel
cap with a hammer to secure it to the wheel.
• Set the frame assembly aside.
Scrap Block
of Wood
Wheel Cap
Assembly
Straight Axle
Straight Axle
1
2
3
4
4
4
Bottom View
Rear Wheel
Straight Axle
Hole
Frame
Hole
Assembled
Rear Wheel
Cap Nut
Rear Wheel
Spoke Side Up

• Fit two pedal axle covers onto the pedal axle metal tabs. Make
sure the metal tabs fit into the slot in each pedal axle cover.
Pedal Axle Cover
• Push the pedal axle covers into the center of the front wheel
until they are flush with the surface of the front wheel.
• While holding the pedal axle covers on the pedal axle, insert
the pedal axle into the hole in the center of the front wheel.
Assembly
• Turn the front wheel assembly over.
• Insert a pedal axle cover onto the top of the pedal axle and
into the hole in the center of the front wheel.
• Insert the remaining pedal axle cover below the pedal axle
and into the hole in the center of the front wheel.
Pedal Axle
Pedal Axle Cover
5
6
7
8
• Push the pedal axle covers into the center of the front wheel
until they are flush with the surface of the front wheel.
Pedal Axle Covers
9
5
Metal Tab
Pedal Axle
Slot
Pedal Axle Covers
Pedal Axle
Front Wheel Hole
Pedal Axle Covers
Pedal Axle Cover
Pedal Axle Cover

• Place a scrap block of wood under the front wheel assembly.
• Slide the pedal on the pedal axle.
• Tap the pedal with a hammer until it is secure.
• Pull on the pedal to be sure it is secure on the pedal axle.
Pedal
• Place the front wheel assembly between the fork arms so
that the pedal axle fits into the groove at the bottom of each
fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #10 x 1" screws into the fork cover and tighten.
• Repeat this procedure to attach the other fork cover to the
other fork arm, using the #10 x 1" screws.
Assembly
• Turn the frame upright.
• Insert the fork post up through the hole in the frame neck.
Make sure the fork is positioned so that the fork covers face
the rear wheels.
• Place the handlebar over the fork post and push it down onto
the frame. Make sure the handlebar is positioned so that the
screw hole faces the rear wheels and aligns with the screw
hole in the fork post.
• Insert the #8 x 3" screw through the hole in the handlebar
and into the fork post so that part of the screw (about 3/4") is
still visible. Then, tighten the screw.
Handlebar
10
11
12
6
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. PRINTED IN MEXICO
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. L2176pr-0920
Pedal Axle
Front Wheel
Assembly
Scrap Block
of Wood
Fork Cover
Front Wheel Assembly
Fork Arms
Groove
Pedal Axle
Frame Neck
Fork Post
Fork Covers
FIRST, insert the screw so
that 3/4" is visible. THEN,
tighten the screw with a
Phillips screwdriver.
3/4"
• Fit the front plate to the handlebar, as shown.
• Insert two #10 x 1" screws into the top of the front plate
and tighten.
13
Front Plate

• Insert the knobbed end of the footrest
up through the opening in the
underside, center of the frame
1
.
• Rotate the footrest 1/4turn
2
.
• Slide the footrest toward the handlebar as far as it will go
until the top of the footrest is positioned over the openings
rectangular cut-out.
• Lower the knobbed end of the footrest into the rectangular cut-
out in the frame
3
.
• Place the frame cover over the frame opening. Make sure the
holes in the frame cover align with the holes on the frame.
• Insert three #10 x 1" screws into the frame cover and tighten.
• Place the seat on the seat mount.
• Adjust the seat for your child's comfort by aligning the hole in
the seat with one of the seat mount adjustment holes.
Knobbed End
Frame Cover
Assembly
• While pushing down on the seat, insert the seat pin through
the hole in the seat and into a seat mount adjustment hole.
Seat Pin
14
15
16
17
7
Seat
Footrest
Knobbed End
Top View
Frame Opening
Footrest
2
➥
➥
1
➥
3
Seat Mount
Seat Mount
Adjustment Holes

• Fit the handle top and bottom to the end of the base, as shown.
• Place the base/handle assembly on a flat surface so that the
wheel retainers are upright.
• Fit the trike onto the base/handle assembly so that the rear
frame rests in the grooves in the base and the front wheel fits
between the wheel retainers in the base/handle.
• Position the base/handle covers so that the flared end faces
the front of the trike.
• Fit the base/handle covers onto the trike rear frame near the
rear wheels.
• Insert two #10 x 1" screws through each base/handle cover
and into the base/handle. Tighten the screws.
Grooves
Assembly
Handle Top
20
21
18
8
Base
Handle Bottom
• Insert thirteen #8 x 3/4" screws through the handle top, base
and into the handle bottom. Tighten the screws.
19
Wheel
Retainers
Base/Handle
Base/Handle
Handle Cover Trike
Flared End

Label Application
• Before applying the label, wipe the surface of the handle with
a clean, dry cloth to remove any dust or oils.
• Remove the backing from the label.
• First, position the center of the label on the handle, as shown.
Then, smooth each end of the label outward to attach it to
the handle.
• For best results, avoid repositioning a label once it has been
applied to the handle.
Handle
• Insert the base/handle pin through one wheel retainer, a
hole in the front wheel and into the other wheel retainer.
• Push the handle pin to "snap" it into place. Pull on the
handle pin to be sure it is secure.
Wheel Retainer
9
Ride-on Rocker
Center of Label Place Center
of Label Here
Wheel Retainer
Front Wheel Base/Handle Pin

• Rotate the base/handle to the upright position.
Base/Handle
• If you are converting from the ride-on rocker mode, remove
the handle pin from the wheel retainers and front wheel.
Learn to Pedal Trike
1
2
10
Wheel Retainer Wheel Retainer
Front Wheel Base/Handle Pin
• Insert the handle pin through one side of the base/handle,
through the holes in the back of the frame and out through
the hole in the other side of the base/handle. Make sure the
handle pin "snaps" into place.
• Pull on the handle pin to be sure it is secure.
Base/Handle
3Handle Pin