FURNITUREBOX MONACO 8 User manual

MONACO 8
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips, advice
and assembly video or visit
furniturebox.co.uk/club/monaco-8
SCAN ME

• Check you have all the components and
tools listed.
• ªƵǿȌɨƵƊǶǶ˛ɈɈǞȁǐȺǏȲȌǿɈǘƵȯǶƊȺɈǞƧƦƊǐȺ
ƊȁƮȺƵȯƊȲƊɈƵɈǘƵǿǞȁɈȌɈǘƵǞȲǐȲȌɐȯȺخ
• àƵƮȌȁȌɈȲƵƧȌǿǿƵȁƮɈǘƵɐȺƵȌǏȯȌɩƵȲ
ƮȲǞǶǶȺشƮȲǞɨƵȲȺǏȌȲǞȁȺƵȲɈǞȁǐȺƧȲƵɩȺةƊȺɈǘǞȺ
ƧȌɐǶƮƮƊǿƊǐƵɈǘƵɐȁǞɈخȁǶɯɐȺƵǘƊȁƮ
ȺƧȲƵɩƮȲǞɨƵȲȺƊȁƮǶǶƵȁDzƵɯȺخ
• jƵƵȯƧǘǞǶƮȲƵȁƊȁƮƊȁǞǿƊǶȺƊɩƊɯǏȲȌǿɈǘƵ
ɩȌȲDzƊȲƵƊةȺǿƊǶǶȯƊȲɈȺƧȌɐǶƮƧƊɐȺƵƧǘȌDzǞȁǐ
ǞǏȺɩƊǶǶȌɩƵƮخ
• wƊDzƵȺɐȲƵɯȌɐǘƊɨƵƵȁȌɐǐǘȺȯƊƧƵɈȌ
ǶƊɯȌɐɈɈǘƵȯƊȲɈȺƦƵǏȌȲƵȺɈƊȲɈǞȁǐخ
• ȺȺƵǿƦǶƵɈǘƵǞɈƵǿƊȺƧǶȌȺƵɈȌǞɈȺ˛ȁƊǶ
ȯȌȺǞɈǞȌȁـǞȁɈǘƵȺƊǿƵȲȌȌǿفƊȺȯȌȺȺǞƦǶƵخ
• (ȌȁȌɈȌɨƵȲɈǞǐǘɈƵȁɈǘƵȁɐɈȺɈȌƊɨȌǞƮ
ƧƊɐȺǞȁǐƮƊǿƊǐƵɈȌɈǘƵɈǘȲƵƊƮȺخ
Important - Please read these instructions fully before starting assembly
²I0Àæy(
!ª0(ßX!0
!
y§à0ªÀm²
Follow us on Instagram
@furniturebox_uk
• ȁǶɯƧǶƵƊȁɐȺǞȁǐƊƮƊǿȯ
ƧǶȌɈǘƊȁƮǿǞǶƮƮƵɈƵȲǐƵȁɈة
ƮȌȁȌɐȺƵƦǶƵƊƧǘȌȲ
ƊƦȲƊȺǞɨƵƧǶƵƊȁƵȲȺخ
• IȲȌǿɈǞǿƵɈȌɈǞǿƵƧǘƵƧDz
ɈǘƊɈɈǘƵȲƵƊȲƵȁȌǶȌȌȺƵ
ȺƧȲƵɩȺȌȁɈǘǞȺɐȁǞɈ
• ÀǘǞȺȯȲȌƮɐƧɈȺǘȌɐǶƮȁȌɈƦƵ
ƮǞȺƧƊȲƮƵƮɩǞɈǘǘȌɐȺƵǘȌǶƮ
ɩƊȺɈƵخÀƊDzƵɈȌɯȌɐȲǶȌƧƊǶ
ƊɐɈǘȌȲǞɈɯɩƊȺɈƵƮǞȺȯȌȺƊǶ
ƧƵȁɈȲƵ
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
45 MINUTE
BUILD
ABC
DF
HIJ
K
G
M
OP
N
Q
RST
UV W

Follow us on Instagram
@furniturebox_uk
lawn, to avoid any bumps and scratches. First, lay out all your pieces and
check you have all the items listed on the inventory.
STOOL: STEP 1
Take the seat base [M] and place
Take 2x side panels [O] and 2 x side
panels [N]. Connect them together
and to the seat base [M] using the
washer and bolt sets [W] - double
check you’re using the correct
bolts. You need 12 sets of washers
and bolts [W] in total for one stool.
Don’t fully tighten all the bolts
until all the parts are in place. Once
everything is connected, tighten
with the Allen key provided, but
take care not to over-tighten.
STOOL: STEP 2
add the padded seat cushion [P]. Your
stool is now complete!
Repeat for the other 3 stools.
M
N
N
O
O
W
W
P

www.furniturebox.co.uk
FULL ASSEMBLY INSTRUCTIONS
TABLE: STEP 1
Place the tabletop [A] face-down
leg frame [B] using 4x bolt and
washer sets [R].
Don’t fully tighten any of the bolts
until all the parts are in place.
TABLE: STEP 3
table onto its feet. Then, very
carefully lower the tempered glass
table top onto the frame. Your
table is now complete!
TABLE: STEP 2
Attach 2x leg frames [C] to either
side of the bigger leg frame [B] using
4x washer and bolt sets [R]. Then
connect both leg frames [C] to the
tabletop. Use 1x bolt + washer
Once everything is connected
correctly, go ahead and tighten all
the bolts with the Allen key provided,
but take care not to over-tighten.
Q
S
A
B
C
C
R
D
set [Q] on one side of the hole and
secure with washer + nut set [S] on
the other side of the hole. Repeat
as illustrated across the 4 holes.

CHAIR: STEP 1
Take the chair seat back frame
[H] and attach it to right side
frame [F], using washer and bolt
sets [V]. Attach the chair base
frame [I], using 3x washer and bolt
sets [V].
Don’t fully tighten any of the bolts
until everything is in position.
CHAIR: STEP 3
Add seat cushion [K],and your chair
Fix the seat back support [J],using
2x washer and bolt sets [V].
is complete!
Repeat for the other 3 chairs.
CHAIR: STEP 2
Attach the seat back support [J] to
right side frame [F],attach left side
frame [G],using 3x washer and bolt
sets [V].
Once everything is in position,
tighten the bolts with the Allen key
provided (but take care not to over-
tighten). Check the stability.
V
F
H
I
V
J
G
JK
V

www.furniturebox.co.uk

ÀǘƵƧɐȺǘǞȌȁȺـǏȌƊǿǞȁȺƵȲɈȺƊȁƮ
ƧȌɨƵȲȺفƊȲƵȁȌɈƧȌɨƵȲƵƮƦɯɈǘƵǐɐƊȲƊȁɈƵƵخ