FURNITUREBOX PARKER User manual

PARKER
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips, advice
and assembly video or visit
furniturebox.co.uk/club/parker-chair
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
45 MINUTE
BUILD
MAXIMUM
CAPACITY 130Kg

Follow us on Instagram
@furniturebox_uk
STEP 2
Attach seat back [A] to
seat base [B] using 4x
bolts [G]. Tighten with
Allen key [I].
STEP 1
Use a clean, at, soft
surface to avoid any
bumps or scratches.
Attach the castor wheels
[F] to each of the 5
leg spokes on base
[C] - these should pop
into place. Then place
hydraulic lift [D] into the
hollow within the legs
base [C] (the thicker
end of the hydraulic lift
goes into the legs base).
Remove the cap from
the top of the hydraulic
lift [D].

www.furniturebox.co.uk
STEP 3
Attach lifting mechanism
[E] to the bottom of the seat
base [B]. Use 4x bolts [H] and
tighten with Allen key [I].
STEP 4
ATTENTION: Carefully
ensure your seat legs are
upright, and then lower
the seat onto the top of
the hydraulic lift. Your
weight, when you sit on
it, will ensure the seat
and legs remain securely
connected. Check overall
stability. Your chair is
now ready to use.
FULL ASSEMBLY INSTRUCTIONS

www.furniturebox.co.uk
www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.