FURNITUREBOX Cascina User manual

CASCINA
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips, advice
and assembly video or visit
furniturebox.co.uk/club/cascina
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
45 MINUTE
BUILD
GLASS

Follow us on Instagram
@furniturebox_uk
STEP 1
Use a clear, at, soft surface to
avoid bumps or scratches.
Place table top [1] on at
surface, with the metal discs
facing upwards.
Attach 3 x table legs [2] to
the table top using washer
[E] followed by split washer
[D] and then screw [C] for
each leg. Use Allen key [A]. Be
careful not to fully tighten yet.
STEP 2
Join each leg to the leg next
to it using connecting plate
[3], for added support.
Secure with 1 x screw
[B] in each hole of each
connecting plate. Tighten
with Allen key [A]

www.furniturebox.co.uk
STEP 3
Once the connecting plates
are secure, go ahead and fully
tighten the legs to the table top.
STEP 4
ATTENTION: With help, carefully turn
your table over so the legs rest on the
oor. Check for stability.
If you plan to place your new table
on laminate or wood ooring, we
recommend you add anti-skid pads
to the underside of the table feet.
These are not supplied with this
product.
FULL ASSEMBLY INSTRUCTIONS

www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.