FURNITUREBOX SANTORINI User manual

SANTORINI
DINING TABLE
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/santorini
SCAN ME

• Check you have all the components and
tools listed.
• Remove all fttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
45 MINUTE
BUILD

Follow us on Instagram
@furniturebox_uk
STEP 2
Attach table legs to table top.
Place table top on at surface,
face down.
Align holes in table legs with
holes in table top.
Secure into places with washer
[C] followed by screw [D] for
each hole. 3 holes per table leg.
Tighten with Allen key [D]
Once table legs are attached
to table top, you can tighten all
screws fully, including those on
the connecting plate at bottom
of legs.
STEP 1
Use a clear, at, soft surface to avoid
bumps or scratches.
First, connect the table legs together
using the connecting plate. Use 7x
screws [A] in the connecting plate.
Tighten using Allen key [D].
ATTENTION: Do not fully tighten yet as
you will need some manoeuvrability.

www.furniturebox.co.uk
STEP 3
ATTENTION: Carefully, and with
help, ip your table correct side up,
so it sits on its legs. Check stability.
Your table is now ready to use.
FULL ASSEMBLY INSTRUCTIONS

www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.